Camera xD Fuji/Olympus M-type card won't work on iBook

I took photos with both an Olympus XD M type 1 gig
card and the same M type Fuji card. Neither one can be read by either my Mac OS 9 or OS 10.3.9. The error message is that I "Inserted a disk containing no volumes that Mac OS X can read". This does not happen with my Fuji non M-Type 256 MB card. Is there something about the M type that can't be read by a Mac OS? How do I make my Mac read the M type cards? Olympus support told me it's a Mac problem. Is there a patch somewhere? Thanks. Respond to Rich at asa(at)asan.com
<Edited by Host, email address>

Hi, and welcome to Apple Discussions.
You have posted in the iBook G3 (Dual USB) Forum.
You may have better luck posting in the _Bluetooth, USB, FireWire, RAM (MacBook) Forum_. To start a topic of your own in that forum, look for the "Post New Topic" link at the top of the list of topics (at the left).
Good luck. I'm sure you'll find a way to get them to work. You likely just need a new card reader that will work with the xD cards.

Similar Messages

  • My itunes card won't work. how can i get it to work?

    my itunes card won't work. its 50 dollars. how can i get it to work?

    Can you provide more information on the problem?

  • ATI, Rage 128 pro display card won't work on 23"hd cinema display Help....

    My rage 128 pro won't work on this 23" display, it simply went black, i would like to know if I can purchase a vga to dvi adapter to solve this problem without buying a new video card? thanks
    G4 400mhz   Mac OS X (10.4.3)  

    Are you in the US?
    Europe?
    These 6-pin cords are readily available for not much money, but the searches are toturous, often involving references to the G5. Like this one from Amazon (US):
    http://www.amazon.com/PCIe-Power-Cable-nVidia-Video/dp/B002UR1654/ref=sr_1_1?ie= UTF8&qid=1388019109&sr=8-1&keywords=6-pin+aux+power+G5

  • Lexar 1 GB CF Card won't work in SanDisk SDDR-80

    Anyone have any thoughts on why my Lexar 1 GB CF card won’t mount when used in my SanDisk Firewire Imagemate CompactFlash Card Reader (model SDDR-80)?
    The card works fine in my USB1 SanDisk CF reader. The card also works fine using a PC card adapter on my PowerBook. It will not mount on either my PowerBook or G5 using the firewire reader, but the firewire reader does work with SanDisk 512 MB cards. I am running Mac OS 10.4.3 on both the PowerMac G5 and PowerBook G4.
    I’ve searched google, Apple Discussions and SanDisk’s support site and can’t seem to find anything relevant, but it is hard to get past all the stores on google.
    It appears that the OS doesn’t recognize the card in any way. Even when I pull the card out of the reader, I don’t get an error message that the disc wasn’t ejected properly. I’ve tried plugging in the reader with the card already in it, and I’ve tried plugging in the reader and then inserting the card. I do believe that I have seen the Lexar card/SanDisk reader work before, but only 15-20% of the time, and never under conditions that I have been able to repeat.
    Just as a test, I plugged in the reader/card to my iBook, running 10.3.9. System profiler shows the card reader, but the card doesn’t mount.
    System Profiler Info:
    Flash Card Reader:
    Manufacturer: 1394
    Model: 0x0
    GUID: 0x781B200004195
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    Flash Card Reader Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x2600
    Product Revision Level: 1.09
    Sub-units:
    Flash Card Reader SBP-LUN:
    dual 2ghz g5, 1.33 g4 17 powerbook   Mac OS X (10.4.3)  

    I have the exact same problem with the Lexar 80x 1GB card with my Delkin CardBus32 reader. Disc Utility sees it, but says:
    Verifying volume “disk1s1”
    ** /dev/disk1s1
    Filesystem too big (250105 clusters) for non-FAT32 partition
    Error: The underlying task reported failure on exit
    1 non HFS volume checked
    Volume needs repair
    iPhoto doesn't recognize the card. Also, works perfectly on a PC...

  • The number on the iTunes card  won't work

    The code on my iTunes card won't work

    Are you entering the correct code, it should begin with X:
    http://support.apple.com/kb/ht1574

  • CSS Type selector won't work!!

    Hello I am trying to do a simple CSS declaration. However, I got the warning"
    Warning: css type selectors are not supported in components ‘sparks.component.TextInput’
    and
    Warning: css type selectors are not supported in components FormItem
    "and not sure how to solve it. I thought s|(type) should declare the style for me :(. Thanks for the reply..
    <fx:Style>
            @namespace s "library://ns.adobe.com/flex/spark";
            @namespace mx "library://ns.adobe.com/flex/mx";
            s|TextInput{  //won't work on my TextInput
            color:#313131;
            mx|FormItem{
            padding-top:5; // won't work on my FormItem either....
        </fx:Style>
    <s:Panel width="600" height="480" skinClass="skins.CustomPanel">
            <s:layout>
                <s:VerticalLayout paddingTop="7"/>
            </s:layout>
            <s:TextInput text="TextInput CSS not working"/>
             <mx:Form>
                <mx:FormHeading label="Please Enter The Information"/>
                <s:HGroup>
               <mx:FormItem>
                  <s:Label text="Brand"/>
                  <s:TextInput id="brand" text="CSS not working" width="156"/>
                </mx:FormItem>
             </mx:form>

    I am trying to style my Alert box with the type selector now. mx|Alert still get me the same warning. This problem really bothers me now? I believe the issue comes from the namespace but I already declare them inside my style tag. Any help????
    Thanks!

  • Msi r6450 video card won't work

    just received a new video card and for whatever reason, my pc won't see it.  it's the msi r6450 md1gd3 card.
    I've got an older gateway desktop with 1pci express slot.
    as near as I can tell, the mb is a c51pvgm.  it's a model 5220 gateway machine using an amd athlon x2 chip 3800+. it has nvidea onboard 6150le processor.  using winxp sp2. 
    bios is set to recognize the pciexpress slot first.  fan comes on within the card but it is not being recognized in the device manager.
    thoughts?
    Thanks

    We can't support Gateway machines but just MSI stuff. Make sure it is not PCI-E 1.x as a six series Radeon and later PCI-E 2.1 and above card wouldn't work then. To be sure the vga is working test it in another machine

  • Is there any reason why an iTunes gift card won't work

    My iTunes gift card isn't working, can anyone tell me why this might happen

    Could be out of Date

  • Does this mean the NIC card won't work on Solaris 10?

    I tried using NICs like Intel PRO/100 S and the 3COM Etherlink 10/100 PCI (3C905C-TXM). I downloaded a software from SUN, made a bootable CD, and when it scanned my PC, it says that likely my hardware will be compatible with Solaris 10 (Nov 2006). Yet,
    At the beginning of the installation, I see this:
    Using RPC Bootparams for network configuraton information.
    Attempting to configure interface elx10 (or ipbr0)
    Skipped interface elx10 (or ipbr0)
    Does this mean the NIC won't work?

    nope, it will probably work just fine. i had the same thing happen both while installing upon a Sparc box and a x86 box...but both go onliine...
    it will ask you later if you want to DCHP or not. you can go from there.
    good luck

  • Type function won't work on trial version

    Just installed trail version of Photoshop CS5 and the type function does not work?
    All I can see when I selct the type tool and start to type is a constant line with no actual letters or numbers?
    Can anyone help?
    Many thanks

    To add to Semphoric's excellent advice, make sure you're not typing white characters on a white background.
    -Noel

  • T-Mobile SIM card won't work with my replacement factory unlocked iPhone 5

    On Saturday, my rear camera on my factory unlocked iPhone 5 stopped focusing. I took it in to my nearest Apple store and they replaced it. Problem is, now I can't get my T-Mobile SIM card to work with the replacement phone. The guys at the genius bar sent me to T-Mobile to see if a new SIM card would fix the problem, but I'm still getting an "Unsupported SIM" error when I try to activate the phone. Any insights?

    Do you have information about the model no. of original purchase that is printed on the back cover ?
    What is model no. of the replacement iPhone 5 ?
    If T-mobile SIM worked on the original purchase and does not work on the replacement iPhone 5, they gave you a wrong model.

  • Sdhc card won't work

    I cannot make the iPad recognize videos on SDHC card connected through camera connection kit.  Video is in both m4v and mp4 format.  I have reformated the card and everything. Tips?

    The files will need to be in the format of IMG_0001.M4v and contained in a DCIM folder to be recognized by the Camera connect kit.

  • Serial ATA2 (Silicon3124) card won't work

    Hi,
    I just bought a Serial ATA2 card, which is Silicon 3124 chipset, 3 internal and 1 external.
    After I have plug in the card, it won't recognize any PCI card installed.
    It come with 0.42 driver but I cannot use due to the file corrupted. I have downloaded their newest driver 1.1.0. After installed, it can shown "Other Mass Storage Controller", but still cannot recognize any harddisk it connected.
    I search whole system but cannot found where the driver installed.
    Do anyone of here have the card and no problem? Please help me!!!
    Thanks!
    Kent

    Go to the chipset maker website...
    http://www.siliconimage.com/support/
    or go directly here:
    http://www.siliconimage.com/support/supportsearchresul
    ts.aspx?pid=27&cid=3&ctid=2&osid=3&
    download the SATA RAID5 tools
    Dear Kent,
    I went to the Silicon Image site and downloaded the latest
    driver which is version 1.1.0 posted 3/23/2006.
    I was using SiI3124 0.42.4.pkg in the past. The new driver appears to be an update. I loaded it on and tried it with the Sonnet Fusion 500P which uses SATA PM. It worked well. It is a tiny bit slower than when using the Sonnet Tempo X4P with a PowerMac G5 with PCI-X.
    I also tried using it with a single drive as you were hoping to do. I had no luck mounting any SATA hard drive with a direct connection using the SATA300 SiI 3124 card. I believe the Sil 3124 requires that the connected enclosure has to have a Sil-3726 SATA PM chip to mount the hard drive(s).
    I would suggest you consider getting a SATA PM enclosure to work with this card or you might want to get a FirmTek SeriTek/1eVE4 Host Adapter which does not require a SATA PM enclosure and will work with direct connect drives. You can see a review here:
    http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/1eve4/
    Have fun,
    Michael
    ===========

  • New wireless card won't work.

    I have an HP Folio 13-1020us, it was suppose to have a intel card in it but it didn't.  So I took out the broadcom it came with and tried to replace it with a Intel Centrino Advanced-N 6235 
    And it wouldn't boot, it said it couldn't recognize the wireless card. Is there anything I can do to get it to work. I upgraded the ssd and memory but the wireless card is a no go. Or do I need a bios update?
     Thanks for some feedback.

    Hi,
    Page #2 of the following manual shows you supported wireless cards:
      http://h10032.www1.hp.com/ctg/Manual/c03177433.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help the T 'Type tool' won't work on Photoshop CC trial?

    I downloaded Photoshop CC recently and started editing a photo thinking all is going very well until I went to place text.  The text tool would not allow me to place text, all I got was a small square that wouldn't show any text.  Can you please advise me with what is happening and how to rectify this problem?  I am operating Windows 7 bit 64, HP Laptop.  Many Thanks!

    Hi thanks for trying to help.  I tried both options of drawing a square to type in and also just clicking and trying to type.  I also changed the type fonts, used Arial, Myriad Pro, Georgia and tried all sizes from 18 pt to even 600 pt.  I have googled all relevant trouble-shooting options surrounding the text type tool before coming on here as a last resort. Cheers

Maybe you are looking for