Camers

My mobile is nokia n9 problem camera not working plz help me

Is there any error message? Have you tried performing the following steps?
1. Reboot your phone. Press and hold the power key for at least 8 seconds. The
phone switches off. To switch your phone on again, press and hold the power key
until the phone vibrates.
2. Restore factory settings. Select Settings icon, tap on Reset and select Restore settings. If prompted, enter the security code. After restoring the original settings, the phone switches off, and then on again. This may take longer than usual and it should not affect your personal data.
3. Check if there's an available update. Refer to your manual for the instructions:
http://nds1.nokia.com/phones/files/guides/Nokia_N9_UG_en.pdf
4. If still the same, you can clear your device. This will wipe all the data on the phone, so make sure to create a backup file first. Go to Settings, tap on Reset and select All.
Hope this helps and let us know the outcome.

Similar Messages

How do I force iPhone to store pics in Photo Stream instead of Cameral Rolld

Sometimes the pictures are stored in Cameral Roll and sometimes Photo Stream. But with Camera Roll the photos do not automatically load into iPhoto.

Rudegar - I appreciate your test - it makes sense that it is working for you and many others, otherwise there would be a lot more reports like mine. Still, a few people are having this issue, so it is a peculiarity that we share, possibly in our settings.
I have the slider on for iMessage, Send as SMS, MMS & Group.
OI also have the "Group Text" app on my phone which has an option for sending texts to email addresses. I had that off. As a test, I turned the option on and sent a txt from imessage to my email with no success.
I also tried to send a text to email from in side Group Text with no success. .
Copy and paste is the work around but requires several steps and shouldn't be necessary.

Why are photos suddenly appearing blank in Cameral Roll?

I updated my iPhone 4S to iOS 7 about a month after it was released. All has been okay up until today. When I take a photo, then go to edit it - it's not there. Well, it is there when you look in the Cameral Roll but when you touch it to look at it, it's just a white screen.
What is happening and how can I fix this problem?

Can someone please help? This problem is really annoying. They've now stopped appearing in iPhoto.

Uninstall camera raw 7.3RC and reinstall cameral raw 7.2

I think camera raw 7.3rc is causing problems with my plugins. I woyuld like to get back to cameral raw 7.2.
How can i do that?

I'm going to reply regardless of whether or not you decide to update us. Lightroom does not use the Camera Raw plugin. Never has, never will. Camera Raw is a plugin for Photoshop and Photoshop Elements. But all of that technology is part of the core program for Lightroom. The only thing you need to do is apply updates to the program as they are released from Adobe. Whenever there is a new major release (next one will be Lightroom 5) you will have to purchase the upgrade. But the updates that will be released for Lightroom 4 will be available to you at no cost. At the present time there is Lightroom 4.2 RC (release candidate) that is available. It seems to be pretty stable on my system. But there is nothing more recent than that.

X girfriend Incoming call image not in cameral roll

I have an image of my exe girfriend that appears when she calls, that I would like to delete. This image is not in the cameral roll or anywhere else to be found. The image is also different from her contact image. I'd like to delete incoming image only. Any help please.

Have you tried to delete her contact image, in contacts?
Maybe you could delete her contact, and after this create a new contact with same name, but with a different pic.
Let me know if this will work

NEW PORTAL-CAMERS

Camers are not working with new portal on WEB!!!

I am having the same issue. It just sits and spins. At the bottom of where it shows if alarm is armed or disarmed is a button to revert back to old portal, do this and you should be able to get your cameras back. Unfortunately you have to do this every time you log in

Camere Raw problem in adobe bridge cc

There is a problem with my adobe bridge cc.When i launch my bridge cc in photoshop cc it open the images in photoshop but it does not open images in camera raw and show a error
"Camera Raw editing is not enabled
Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature"
Any help will be highly appreciated
Best regards
Haseeb iqbal

Try
Open Adobe Photoshop first. Open a Camera Raw file in Photoshop.
Then open Bridge from within Photoshop from File> Browse in Bridge.
Then try to open Raw files in Bridge. That should work.
Re: Camera Raw editing is not enabled.Camera Raw editing requires that a qualifying product has been lau

How do i delete multiple photos at one time from the cameral roll on iPhone?

I need space on my iPhone4s, and have thousands of photos on the camera roll, which are backed up on my computer, so want to delete them. MUST I delete by choosing them individually and deleting, or is there a way to mass delete them?

I just had the same problem. I had 8.6 GB of photos on my camera roll, and my new iPhone only had 16 GB. The error message telling me that I had run out of space kept coming up, and I couldn't take any more pictures. So I followed wjosten's suggestions.
wjosten wrote:
Launch Image Capture from your applications folder, connect your phone...does Image Capture see the photos? If so, you can use Image Capture to delete them.
It really only helped to have a mac, and image capture ran perfectly.
*When you open Image Capture, all I had to do was click on the red warning/danger sign to delete the selected photos. I have my phone streaming with my Mac, so I didn't discriminate between all my old photos had already been backed up.

How do I get Photoshop CS3 and Bridge CS3 to show and open camerea RAW files?

I am not able to see or open Raw files from my Canon 40D in either Photoshop CS3 or Bridge CS3. At first I was able to open RAWS in Photoshop and then I followed directions on the internet at how to manually replace a Camera Raw Plugin so I could open it in Bridge and now neither of the apps work with RAW. In photoshop It says that the file is not supported.
I looked up what plug in I needed and it said 4.2 for a Canon 40 D. I also followed the instructions in the read me file that was with the plugin download. No results from it. I even tried to switch it back to the old plug in to see if I could atleast get back the capiblility of opening it in Photoshop even though bridge was not working...still can't open it in either. What am I missing?

You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel

My Samsung Galaxy Camers SD Card just won't work on my iPad via the camera connector - please help!

Hi, I have a Samsung Galaxy Camera and I try to connect my Micro SDHC card via the iPad camera connector kit.
This has worked in the past with other memory cards but this is a new one and each time I go to the import option on my photos it says "No Photo"
I use an adapter to connect the sd card as it's micro, I have tried my other adapter to connect the camera via the lead however the accessory is not supported due to the camera needing more power!
I have read someone else's post and they suggested to reformat the card, I have used the disc utility to format it however it's saying its FAT32. I can't seem to format my card through my camera either?!
I'm at a loss as to what I can do and my local Apple store have stopped giving appointments to the Genius Bar so hoping someone here might help me out
I want to use my camera at christmas but know the picture upload is going to be a nightmare!!!
Thanks

Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
iPad: Using iPad Camera Connector with unsupported USB devices
http://support.apple.com/kb/ht4106
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

PC crashes when I connect my iPhone while it has pics in the cameral roll

Whenever I connect the iPhone to the PC while there are pics in the camera roll, the PC crashes with a blue screen. I can simply just delete the pics but I really don't want to not be able to have pics on my iPhone.
Any help?
I have Windows XP Pro if that helps.
Thanks in advance

I had the same problem as this and couldn't work out what it was! After reading on this feed and finding out this happened because of Logitech camera it only comfused me more as I didn't think I had one!
After looking on the net a little more I found out that my built in web cam was a Logitech.
So after reading I needed to update the drivers for this I went on the Acer website and found only update drivers for Vista OS, I am running XP! Away I downloaded the vista drivers and now the camera on my iPhone is working great and doesn't crash my laptop.
So thanks veryone for your help and hope that this helps others with the same problem... there is nothing worse than having something new that doesn't do what it says on the tin!

How can I move photos in Albums into Cameral Roll?

I reinstalled Lion OS X but I forgot to back up photos.
Is there any way to save them in iPhoto or in my Macbook?

You can't move photos in Albums that were transferred from your computer into the Camera Roll.
Photos transferred from your computer via the iTunes sync processa are optimized for viewing on the iPhone - the original resolution of these photos is reduced. This is why transferring these photos in the opposite direction is not supported. Photos transferred from your computer should remain on your computer and should be included with your computer's backup along with all other important data.
There are some paid 3rd party utilities that provide for transferring these photos in the opposite direction, but the original resolution of these photos is lost.

Add photos from PC to cameral roll with metadata

Hello,
I have some pictures that I took from my iPhone to my computer by error and now I want to have them back on my iPhone "camera roll".
I know I can send them to my iPhone by email and then save them to the camera roll but doing this delete all the metadata from the pictures: it saves them at the end of the camera roll as if I took them this morning where I live instead of 3 months ago in another country (with all the others photos I took during a travel).
Is there any way to put them back into the camera roll, in the middle of all the pictures from this travel (where they really belong) ?
Or do you know an app which could do that ?
Thanks in advance.

The following app may do it: http://www.photosync-app.com
On this page http://www.photosync-app.com/photosync/en/features.html#cluster_1 it claims
Received photos & videos are imported directly into the Camera Roll or an album you defined.
It mentions keeping metadata intact directly above that quote when referring to transfers in the other direction (phone to computer) but doesn't specifically refer to it when transferring from computer to phone.

Problem with iphone cameral roll

so currently i have near 7 GB of images stored on my iphone 4 and i only have 1 gb free space .is there anyway to lessen the photo size or free up the space without losing the photos ?

In Australia having the same issue. Currently there is a thread on a local tech forum about the issue wondering if the issue may be with 850MHz networks or the cell radio being idle. I have noticed when browsing using WiFi or just sitting on the lock screen it will lose it but when streaming radio over 3G for about two hours it had no issues. I had the buffer for the radio down to three seconds to if the 3G had dropped I would have noticed the music stop.
I have spoken to Apple and they suggested to do a restore of the phone but not to restore my backup. I had no issues with the streaming radio so I restored the backup and did another hour of testing with no dropout. WiFi was enabled in first test but disabled in test with backup restored (so it had to stream over 3G not my WiFi).
Any ideas would be appreciated.

Cant find CameraRaw plugin (Panasonic Lunix DMC-G6 - RW2 files) for Photoshop 5.5. Loading the pictures via Bridge from the Camera does not convert the RW2 to dng files. With my old Olympus Camere E 420 it worked well.

Ich kann das Camera Raw Zusatzmodul nicht finden, mit dem beim Import der Bilddateien von der Camera über die Bridge die RW2 Dateien als dng Dateien im PC-Ordner abgelegt werden. Mit den RAW Dateien meiner alten Olympus E420 funktioniert das.
Über Bridge werden die RW2 Dateien von der Kamera direkt in den PC -Ordner abgelegt.
Fürf den Adobe Dogoital Negativ Converter habe ich den entsprechenden Update gefunden. Mit der Version 8.7.0.309 kann ich die RW2 Dateien in dng Dateien umwandeln und mit dem "Camera Raw 6.7 - Panasonic DMC-G6" öffnen und weiterbearbeiten.
Ich habe versucht für Photoshop ein update zu finden. "Camera Raw.8bi" vom Download "Camera Raw_8_5_w64bit.zip" habe ich unter "Programme-Common files-Adobe-Plug-Ins-CS5-Fileformats" eingestellt. Damit war aber kein Camera Raw aufrufbar mit den dng oder RW2 Dateien aufrufbar. Mit dem alten "Camera Raw.8bi" können die dng Dateien verarbeitet werden.
Was muss gemacht werden, um beim Import über Bridge die RW2 Dateien in dng Dateien umzuwandeln?

You probably want to re post your issue to the Photoshop forum. You are currently posting to the Photoshop Developers forum. Photoshop General Discussion
I don't believe that Photoshop 5.5 ACR plug-in is getting updates any longer and I don't think the new version, copied into the correct place, will work. The new plug-in is not compatible with the old Photoshop 5.5 as a host app. That forum will know the answer for sure.

Lens correction for olympus camers

I attended a Lightroom webinar with Scott Reznick and he mentioned that a lens correction technology for my olympus camera could possibly be found at Labs Adobe. com...
I have searched said site and came up with nothing....but maybe I am not looking at the right area...Any input??
Jeff

See the following:
Supported Cameras: Camera Raw plug-in | Supported cameras
Lens Profile Support: Lens profile support | Lightroom 5, 4, 3 | Photoshop CS6, CS5 | Camera Raw 8, 7, 6

Camers

Similar Messages

Maybe you are looking for