Camileo charging problem (solved) and a general question!

Hi all!
First of all, I was going to ask for help as to why the Camileo S10 was not charging (the orange light wasn't flashing), and I'd seen a few people with similar problems.
The solution?
Give the contacts on the battery a clean.
The insulation sticker that comes on it must leave some kind of residue on it, and it's enough to prevent charging. Now it's flashing away happily :]
So my general question was, is it possible/advisable to use the camera on the mains?
Rather than constantly draining and charging the battery during long shoots, I'd prefer to just leave it plugged in!
Thanks very much in advance!
Paul

Hi
I think the battery handling is always the same no matter what product it is
From time to time the battery should be recalibrated.
This means that the battery should be discharged fully and after then you should charge it again until the battery would reach 100%
I do this with all my batteries; mobile phone battery, digi cam battery and notebook battery.

Similar Messages

Report Builder Question - OA AR Aging - and a general question

I'm sure this is the wrong forum for this question, but I thought there might be someone here who might be using Oracle Applications and Report Builder who'd be kind enough to help me out.
We've recently implemented Oracle Applications 11.5.10 and I have to use report builder to change the Accounts Receiveable Aging (7 bucket) to a 5 bucket report. I've already made some changes to the seeded "ARXAGMW.rdf" report, but I'm not a big Oracle Reports guy. I've stumbled through making some changes in various other reports. But this one is just plain nasty! :)
I was thinking that I could simply add buckets 6 & 7 to bucket 5, then just hide or delete the 6 & 7 buckets. But I'm not sure where to even start. Any help with this would GUARANTEE a Christmas or other holiday card this year! :)
I really want to keep this simple as possible, so any help would be very....helpful. :)
Oh, my general question is: Are there any resouces/books for Oracle Reports (Report Builder)? I feel so lost trying to modify existing reports, let alone creating new ones.
Thanks again!
Steve

Hi Steve,
I am working on the 7-bucket aging report and i want to add a new field in data model.
As the query is build dynamically, i have modified the function BUILD_CUSTOMER_SELECT to meet my requirements.
But the problem is that in the data model, the field is not present in my Grouping. and if I try to add the field in the Data Model query (Q_ Customer) section,
i get the following error: ORA-01789: query block has incorrect number of result columns.
The query is as shown below:
select rpad('a',50,'-') short_cust_name,
0 cust_id,
rpad('a',30,'-') cust_no,
rpad('a',500,'-') sort_field1,
rpad('a',40,'-') sort_field2,
0 payment_sched_id,
rpad('a',32,'-') class,
sysdate due_date,
0 amt_due_remaining,
0 days_past_due ,
0 amount_adjusted,
0 amount_applied,
0 amount_credited,
sysdate gl_date,
'x' data_converted,
0 ps_exchange_rate,
0 b0,
0 b1,
0 b2,
0 b3,
0 b4,
0 b5,
0 b6,
rpad('a',25,'-') bal_segment_value,
rpad('a',500,'-') inv_tid,
rpad('a',32,'-') invoice_type
, 'y' parent_cust --I WANT A NEW FIELD HERE TO BE VIEWED ON THE REPORT LAYOUT LATER
from dual
where 1=2
UNION ALL
&common_query_cus
Did i missed somthing 4 me to be able to add the field here?

IPhone charging problem solved by turning off safari JavaScript

Charging problem encountered while charging my iphone (specs as per userid) wother the repeat alerts about "accessory not supported" has been SOLVED by going to:
Settings -> Safari -> Advanced
and turning javascript OFF for the duration. No more interruptions. Praise the Lord!
Just wanted to share with the community.

To attract other users to the solution you found, reply to your own post and mark this reply as "solved". That way users with a similar problem will find this thread more easy.

Update on Bioinformatics WIKI, scripting challenges, and a general question

I am waiting for my site to go on-line at Oak Ridge National Labs (USA, Tennessee). Should be another week or so, maybe less.
When that happens, you will see a veritable explosion of scripting challenges in my wiki (Emerging Technologies->Bioinformatics.)
One general question in preparation for these challenges.
There are a number of standard bioinformatic programs that can be run interactively via the web at various sites, e.g. "BLAST" and "STRIDE".
Although these can also be run locally, this requires that you download large databases and keep them updated.
So here's my question to the scripting experts:
Are scripting languages powerful enough to submit queries to web pages and then use regex's to parse the html that is returned?
Bill Mann has used PERL to do some of the required regex parsing, but there is a lot left to do, and, his stuff only works when a perl program is invoking a bioinformatic program locally, not interactively.
If so, we all can do some beautiful stuff together , if anyone is interested ...

...my wiki on...
There is by it's very nature no such thing as MY WIKI, except you run your own wiki project in an exclusive mode. Which were...well ... unusual.
Are scripting languages powerful enough to submit queries to web pages and then use regex's to parse the html that is returned?
Yes.
anton

SAP CM25 which profile to use and why and some general questions

Hi there,
I have a few general questions, if you may share your thoughts on this.
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
Thank you

Hello
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
It can be used for both depend upon bottle neck resource whether machine or labour.
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
Better it should be finite planning for planned order also you can use MRP with lead time scheduling.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
It depends upon the data load and selection,
Restrict the number of objects to be displayed, for example, select only a small number of work-centers/orders.
Customize the time profile (transaction OPD2) such that the database read period, the planning period and the evaluation period are as small as possible. As a result, fewer objects are read and displayed.
Refer KBA 2038780 - Tips for performance improvement on Capacity Leveling
If you want to process more orders, check whether a batch planning (planning in the background on transaction CM40) is possible.
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
It depends upon your requirements which transaction to use and which profile. You can customize your own profile also.
Best Regards,
R.Brahmankar

Njawin - jcomgen and some general questions

Hi.
I'm currently evaluating njawin, and some questions came up:
Will there be a command line interface for jcomgen?
The interactive GUI isn't really suitable for an automated build process.
njawin compared to jawin:
njawin seems to be more advanced, but there's no source available.
Does anybody know if this will change in the future?
regards,
roman

Carl,
The njawin distribution available for "evaluation" download around the web comes with no license, as it is a version of OLE for Java (OLEJA), a commercial product, which was developed before OLEJA went retail.
One thing you'll notice is that OLEJA and Njawin have remarkably similar APIs. If your application's functionality does not have very complex requirements, you can simply replace all references to "oleja" with "njawin", and all references to "compose" with "develop". This holds true for the generated .java files, the .xml file, etc. I am not sure if OLEJA introduces or uses more APIs than the ones that appeared in Njawin, but for my application, this approach was successful.
One other thing to keep in mind is that I don't see why you'd actually need to build your sources into a jar, if you simply include them in a larger package as part of your application's source code. Just put njawin.jar, njawin.dll, and yourdll.dll on the build path and the rest of your problems should be solved for you. Keep in mind that, since OLEJA is commercialized, it's been debugged a lot (as the author has stated in mailing lists) and that means Njawin could have some unexpected problems. In this case you should thoroughly test your usage of Njawin with your application to be sure it runs well in your environment. Errors that could potentially crash your JVM may appear when certain functionality (especially multi-threaded functionality) inside your ActiveX control is executed.
Regards
Sean McNamara

Convergence and mshttpd general question

I've seen suggested on several posts here on this forum and from other Sun engineers that the mshttpd Webmail process should (must?) be run on the same server as Convergence. I didn't find this anywhere in the documentation for Convergence, so if it is there and I missed it, please point out where I overlooked it. For our Comm Suite 7 set up, we had provisioned 4 mail multiplexors (that run mshttpd), 4 mail message stores, and 2 Convergence front-end boxes. Our environment was officially approved by Sun Professional Services, so if this mshttpd/Convergence factor is so important, why wasn't it pointed out to us by S.P.S? Also, why does the Convergence setup let you specify a different hostname for the Web Mail server?
Thanks,
Jim

JimBuitt wrote:
I've seen suggested on several posts here on this forum and from other Sun engineers that the mshttpd Webmail process should (must?) be run on the same server as Convergence.The webmail process does not have to run on the same server as Convergence.
I didn't find this anywhere in the documentation for Convergence, so if it is there and I missed it, please point out where I overlooked it.http://wikis.sun.com/display/CommSuite7/Communications+Suite+7+Installation+Scenario+-+Convergence
<snip>
Recommended:
* Webmail Server component of Messaging Server 7 Update 2
We recommend that you install the Webmail Server on this host.
About Webmail Server
The best deployment practice is to place the Webmail Server on the same host as Convergence to provide horizontal scalability and enable smooth growth of services.
Note: From a functional perspective, Convergence provides complete mail service when the Webmail Server is located on a different host than Convergence. Therefore, in some deployments, the Webmail Server may be located on a different host.
Other Messaging Server components such as the message store and MTA, Calendar Server, and Instant Messaging Server may be located on other hosts.
</snip>
So whilst you can run the webmail processes on another system, you need to consider the value (CPU offloading) vs. the cost (network delay, additional point-of-failure). The webmail process doesn't consume much CPU resources compared to Convergence.
For our Comm Suite 7 set up, we had provisioned 4 mail multiplexors (that run mshttpd), 4 mail message stores, and 2 Convergence front-end boxes.Is there any documentation that has the webmail processes (used by Convergence) running behind a load-balancer? I can imagine a few scenarios where this will cause problems:
=> If a user session is processed by different front-ends then there may be synchronization issues e.g. an email marked "Read" in one webmail instance may be "Unread" in another.
=> The webmail services keep IMAP connections open for active sessions (where a logout hasn't occurred/session hasn't timed out). If Convergence is accessing different webmail front-ends for the same user then you could have multiple webmail sessions subsequently additional webmail => IMAP connections.
=> If you have a single problem webmail instance it will impact all Convergence front-ends "randomly" vs. having a single Convergence front-end failing all the time. The second scenario is much easier to diagnose/isolate.
In general it comes down to this -- don't make your environment more complex then it needs to be.
Regards,
Shane.

[solved] and yet this question..why my rc.local doesn't work

Hi,
I would like to add some commands to the rc.local but I can't figure out why rc.multi is reading it but it doesn't have any effect.
rc.local
#!/bin/bash
echo "LOCAL"
/usr/bin/xset dpms 180 360 720 &> /dev/null
/usr/bin/cpufreq-set -c 1 -f ondemand &> /dev/null
/usr/bin/cpufreq-set -c 0 -f ondemand &> /dev/null
I see during booting that the echo "LOCAL" is written but when I check for instance xset the values are the default and not what I want... the same applies for the cpufreq...
just in case if I run:
#/etc/rc.local
it works.. it does what I want but why not at boot-time?
I understood from the wiki that:
it is run after the basic setup (modules/daemons)
as the root user,
and whether or not X starts.
I'd appreciate it if someone can tell me how to set the rc.local
Last edited by bradomyn (2011-09-26 22:27:48)

It's working actually, my bad.
First issue:
/usr/bin/cpufreq-set -c 1 -f ondemand &> /dev/null
/usr/bin/cpufreq-set -c 0 -f ondemand &> /dev/null
this two commands can be replaced by
echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
for each of my cores in /etc/rc.local to set the governor during boot.
as moetunes suggested me in this post:
https://bbs.archlinux.org/viewtopic.php?id=127165
and the other issue:
/usr/bin/xset dpms 180 360 720 &> /dev/null
well after reading the xorg documentation xset sets the values but the default values are going to be load after...overwriting. If I specify this values in the xorg.conf according to:
blanking section
http://www.shallowsky.com/linux/x-screen-blanking.html

Forum search problem[Solved] and search for Homer[NOT Solved]

While trying to find a thread where someone was trying to track down the archlinux homer release iso, I found out that any search term with the word install doesn't work. It just goes to a blank screen.
That said, does anyone know where I can get an iso of homer, or where that forum thread went?
Last edited by Sjoden (2009-01-04 04:08:37)

Ah, ok, thank you! I tried a search for "linux", expecting that to have one of the most hits, and it does the same thing.

HUM/Vibration Problem Solved and it was EASY..

My Brand New MP came with 1HD and I installed 3 more. Much to my surprise, the MP sounded like an airplane with a lop-sided propeller when it started up.
I opened the side panel and removed all 4 drives from their bay's.
After looking inside to figure out what the culprit could be... I noticed the horizontal plastic surface above the front fan was very thin. HD #1 sits directly above this thin plastic surface. This looked to me like a plausable cause for vibration.
I used a 3.5 inch length of 1/2 inch 3M Brand double sided foam tape and placed it on top of the thin plastic fan top surface. I did not remove the protection layer on the double sided tape, rendering it a single sided foam strip.
I then put all drives back in their proper bays and closed up the MP. Since then the MP has been as quiet as a church mouse......

Hi Knype,
have the preinstalled WD 250GB and three Seagate 320GB.
No issues and/or slowdowns (not that I really depend on speed).
Got the Seagates because they were cheap (83 Euros/per piece).
Stefan

Syncing and Charging Problem with 1st gen iPod nano

I purchased a 1st generation iPod nano via eBay about 3 months ago and have developed an interesting syncing and charging problem. When I plug the nano to my iMac, frequently neither the computer nor iTunes will recognize it. I have done "the five R's" with occasional success. I've tried jiggling the cable in the computer port and sometimes it works in getting iTunes to recognize the nano, sometimes it doesn't. Even when I am able to get iTunes to recognize the nano, I have frequently found that the nano hasn't charged up at all. In fact, a couple of times I found it almost totally drained of power after having been connected to my computer. Yes, I have the most recent version of iTunes installed on my iMac and my iMac, by the way, is relatively new - having been purchased in May of this year. What is interesting is that I've taken my nano to work and it has absolutely no problem charging up on my Dell (yuk!). For the record, I do not have iTunes installed on my work computer and I am not allowed to add any apps to my work computer without the consent of my supervisor. The chances of getting iTunes installed on my Dell at work are pretty much nil. Any suggestions on how I can fix the problem?

I bought a new USB dock connector and hoped, with fingers and toes crossed, that something positive would happen. Sure enough, I was able to sync and recharge my old iPod nano. I guess the original USB dock cable is on its last legs. Not totally broken, but no longer reliable. I consider my problem solved! My thanks to everyone who took the time to read and try to solve my iPod problem. I greatly appreciate it!

Solved ( Ipad charging problem after update IOS 7.0.4 )

Its already verified by me ( Technician ) problem solved.
We were working on my customers ipad for 2-3 weeks finally figured out whats the problem.
We replaced new battery, cable and charger did not work. Reseting your ipad also does not work.
Since we fixed customers Ipad. We tried the small charger, 10w charger and connecting to computer it works. Fully charge.
Its easy fixed. Here what you can do. You need to do fresh factory restore. Do not use restore / update
1. If your ipad is dead, slow charging. Find a way to have it charge get it at least 5-10 % charge so that your computer will detect it on Itune.
2. Open Itune, check if your detect it, you see it on top right coner.
3. If you have FIND MY IPAD app you have to turn it off otherwise it wont allow you. To turn it off go to PRIVACY then you will see LOCATION services turn it on
    You also see FIND MY IPAD if its on turn it off it will ask your Apple ID and password. If its off already your ready to go. NOTE: Ipad has to be connected
    on WIFI or 3G
4. Go back to Itune. On the top right corner you will see your IPAD NAME click that, you see another box ( restore / update and restores ipad ) select restore
   Ipad ( Factory restore with new IOS 7.0.4 ) let it finish the restore and your done. It will now Fixed your problem. It should charge using your original charge
or connecting to your computer.
NOTE: If you want to upgarde your IOS to 7.0.4 dont do the update you might have problem. You do fresh Factory restore it install new IOS 7.0.4 no problem.
          If you have data that you need to have to back it up this restore will earese all information on your ipad.
Good Luck, let me know if this help you and dont forget to share it.

The weird iTunes icon.... Does it also show the USB cord on the screen? If it does, that means that you have to restore your iPad using iTunes on your computer. Something went wrong and you have to fix it by restoring the iOS software.
iTunes: Restoring iOS software - Support - Apple

Undocumented problem solved with 16-bit pcmcia and irq error

I am having the exact same problem as described in the following post:
"Undocumented problem solved with 16-bit pcmcia and irq error."
"I'm using a DAQ Card (AI-16E-4), which didn't work properly in MAX. MAX complained that the card didn't respond to an interrupt request.
I've had this issue for a while, but dropped it, since NI support told me nothing could be done about it. Meanwhile, a seemingly unrelated problem with a wireless pcmcia network card arose. Cisco had no clue what was wrong with their card either, but I found Microsoft Knowledge Base Article Q327947. It seems that Win2k (they claim SP3 and up) disables ISA to PCI routing, which is what causes this problem.
To fix it, open regedit
and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Pcmcia\Parameters"
edit or create the DWORD value "DisableIsaToPciRouting" and set the value data to 0.
See Microsoft's article for further details: http://support.microsoft.com/default. aspx?scid=kb;en-us;327947"
The difference is that I am using WinXP and the Regedit fix does not solve the problem. Does anybody know how he was able to continue to use the card before he solved the problem? The card works fine in MAX, but errors out in LabVIEW.

Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe ‏1557 KB

[nForce] Lets solve this 1394 problem once and for all.

Hi guys,
For the past 3months I have been trying to connect my Panasonic GS150 to my comuter in order to use Avid dvxpress pro. I have the problem of when I connect the camera to the computer, nothing happens. I also have this problem with my Ipod, however testing various different devices with the computer produces a strange outcome. Various different cameras work, xp pops up witha found new hardware device (like it should). Its very strange.
I started to think it was my system. I changed my onboard firewire to a pci card, same solution. So then, i reinstalled windows, same outcome. So i bought a new motherboard nforce2 platinum and to my total amazment, same problem. If was after i had totally failed in finding the solution that i started to look elsewhere on the net for anyone who knows the answer. It seems to be a VIA firewire chipset problem. Every post of people who had similiar problems where looking for the answer but NOONE has solved it, ive come across about 1000 posts with no reply's. Its a problem that thousands have but not many people ever use ther're firewire ports so they dont they've got the problem.
I really dont know what the problem is anymore, is it windows, is it certain 1394 devices, or is it the Via chipset. I havent a clue, so if anyone wants to attempt to solve this problem once and forall they will be the hero of about 3000 potential customers...
Anyone?
Jon.

Yes thats correct. Regardless of the hardware, and various 1394 devices are recognised. I've bought a 4pin to 4pin cable which i will test with different devices to see if they are consistent with a 6pin to 4pin cable, it may be a power issue. Not sure what chip on pci card, heres the info from website.
- Three external 6-pin FireWire ports
- Interoperable with existing, as well as older, 1394 consumer electronics and peripheral products
- Complies with OHCI requirements
- Compliant with IEEE 1394a-2000 standard
- Isochronous transfer support (guaranteed bandwidth) for DV video data transfer from Camcorder to PC
- Provides three fully compliant cable ports, each supporting 400Mbits/sec, 200Mbits/sec and 100Mbits/sec traffic
- Plug and Play & Hot-Swappable for all ports
- Power overload and protection failure on each port
- PCI bus master with PCI 2.2 Bus specification

General question about iTunes Match and multiple libraries

Hello to everyone,
I have a general question about the iTunes Match service, which is available since yesterday in my country (Italy). Currently my library situation is the following:
Computer A (desktop, Windows 7): "big" iTunes library (about 20 GB), at the moment not associated with my Apple ID
Computer B (MacBook Air 2011): "small" iTunes library (about 5 GB), associated with my Apple ID
At the moment, both my iOS devices (iPhone 4 and iPad 2) are synchronized with the smaller library on the MacBook Air.
Question is as follows: should I subscribe to iTunes Match, would it be possible to upload the "big" library (provided I associate it with my Apple ID) to iCloud while keeping my devices synchronized with the "small" one?
Ideally, at the end of the day, the situation should be the following: both iOS devices with music from the small library + possibility of downloading songs from iCloud (coming from the big one). Is this possible?
Maybe the question sounds stupid, but I want to be sure about this before paying for the service.
Thanks a lot.

Yes, you could also associate your larger library with iTunes match if you associated your Apple ID with it. However any purchases in the library made from another Apple ID will not be matched with iTunes much.
If both libraries are part of iTunes match, then all your devices will see all of the content from both libraries, which content you choose to have on those devices and which you have accessible via iTunes match is entirely up to you.

Camileo charging problem (solved) and a general question!

Similar Messages

Maybe you are looking for