Camileo Clip - shaky video

I bought the clip to use for recording my walks. I tested it using the stabiliser and holding the clip as I walked along, but the resulting video was jumping around so much it was unwatchable! How on earth can I overcome this problem? If I do 'clip' it to myself then the shaking will be even worse as at least in my hand its steadier. I even tried video stabilisation software but the original footage is so unsteady the software cant cope!

Well, I wrote already in your other thread about this camcorder.
The Camileo clip its a fun, party camcorder designed for shooting small segments of an party event. You should not expect too much from this fun camcorder.
As far as I know this camcorder supports the image stabilization
The electronic image stabilization helps you to minimize the shaky video effect but you of course you should not expect too much from a 60 camcorder.

Similar Messages

  • Under iMovie 10.0.2:"Stabilize shaky video"

    All I see is a spinning ball on the LHS and a xx% on the RHS. I have no idea whether a section of my project has been stabilised, or not.Grateful for advice please.

    Analysis for stabilization takes quite a long time (something like 10 times the suration of the clip).  When it is done there should be a white tick against the 'Stabilize Shaky Video' above the viewer. 
    When you say you see a spinning ball is this the mac 'beachball'?  Does it stop or does imovie become unresponsive? 
    On the LHS and RHS of what?
    Geoff.

  • How is the best way to export my project with clips and videos?

    I would like to save my project and export the project with clips and videos included. What is the best way to do it?

    Can you clarify:
    clips and video
    Seems as though you want to retain the original media?
    Export as a Master File to get a good quality export file of your Timeline.
    Al

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • Shaky Video Playback

    I am new to editing and I am currently experiencing shaky video playback in Premiere Elements 12.
    I am working from a laptop currently and I am not sure if it is my computer specs which is the issue or software is the issue.
    I am recording with Canon Rebel t3i in HD 1080 29fps.
    Processor: AMD E-350 1.6 GHz
    RAM: 5.6 usable
    OS: 64-bit

    Nupetastik1
    The answers will be in the details.
    The links provided in post 2 are impressive but do not necessarily tell us what you can do in your specific computer environment with your specific source media and your Premiere Elements 12  project in a 64 bit system, assumed to be either Window 7, 8, or 8.1. Please confirm what version/editor of Windows is being used here as well as the size and scope of the projects that you intend to create in the future in the computer environment that you outlined.
    Granted "..Part of the issue..." is included as a modifier when your computer rank of 745 was pointed to. At this point, I am not ready to pass judge that your "shaky video playback" is related to your ADM E-350 processor.
    Once we know more including
    a. Do you have the correct project settings
    b. The duration of your Timeline content...what parts of it are shaky, all or just some...if some, have you applied any effects to that content...etc.
    c. In spite of "shaky video" seen in the Edit Mode monitor, do you see the same "shaky video" in the export of that "shaky video" Timeline content?
    Please review and not be discouraged at this rank "745" just yet. It is interesting information to have in projecting the compability of your workbench to create larger projects. But, once the display issue is defined, then you can explore and experiment in searching for the limits of your setup related to the size of the project.
    That is my take on the situation in discussion. Do not give up until all the details are sorted out.
    Thanks.
    ATR

  • How to Delete several Audio clips from Video clips on Timeline of APPro CS5

    I  would like to know how to delete multiple audio clips from Video clips at once in time line in APPro CS5? Please advice step-by-step procedure. I can DELETE audio from a single Video clip. But I wanted to DEL Audio from multiple video clips. Your help is much appreciated. Thanks

    Thanks for the advice given by Shooternz, Colin and Jim. Your help is much appreciated for a beginner like me... Jim's idea was also good..It worked for me and also safe if I need to use the original audio. Following method also found good...but previous audio clip cannot be extracted after deleting it. ... 1. Hold down "ALT" key first then select the first audio clip in the chain of video clips to Delete. 2. Hold down " Shift + Alt " keys together and click right mouse button on all audio clips to be deleted one by one. Make sure only audio clips are selected. 3. Then release ALT+Shift keys and then click right mouse button and select "Clear" from pull down menu to Delete all selected audio clips on the time line. This method works very well for me. Thanks for every one who has adviced me how to do it. Thanks guys... If u all find better method tha above...please inform us. Thx.

  • Shaky video help

    hi everyone, does any of you know about a nice plugging to reduce shaky video, i know final cut comes with "smooth cam" but theres probably a better plugging that could probably would do a better job so if you know of any good one even if they are not free please let me know
    thanks

    Core Melt has an interesting plugin
    http://www.coremelt.com/products/downloads/lock-and-load.html

  • Best way to stabilize shaky video?

    Whats the best plugin or standalone way to stabilize shaky video? Are there any free solutions?

    Nothing free that I know of, but take a look at iStabilize.

  • When watching fox news clips the video lags the audio as time progresses

    I use firefox as my browser. While on Foxnews I watch their news video's and as time progresses through the video clip, the video lags the audio. It gets worse and worse over time. This happens on msnbc etc.

    You can check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Embedding clipped Youtube video into Keynote on iPad?

    Is it possible to embed a clipped youtube video into a keynote presentation on the ipad? I know how to do it in Powerpoint, but that doesn't help me as I don't have powerpoint at home and am having to rely on trying to do it with Keynote on my ipad.
    Thanks!

    Two possibilities I can think of. MAke sure that the side button on your ipad is set to screen lock & not mute. If it is set to mute, you'll need to slide it to unmute it before the speaker will work. Otherwise, it sounds like some kind of software glitch. I'd do a reset (I think you hold down the power button & the button on the top for like 10 seconds, until you get the screen asking if you want to turn your ipad off. Follow through, give it a few seconds, then restart it.

  • Shaky Video during movement

    Hi.
    I have a video that I created (you can see it at www.spacenelson.com - follow the links to the Burn video) that is giving me fits.
    After I was done with it, I moved the files from a working drive to a USB drive for storage. After a while, I needed to make a new copy of the video, so I moved the files back to the internal drive. After quite a bit of fussing around, I have the video working again in FCE.
    I exported a self contained movie, and tried to burn it to DVD using toast 6.0. When I watch the video now, the areas where the camera moves, or the subject moves quickly, the video is no longer clear. I tried burning it using iDVD, but it was even worse - the shaky parts showed large 'squares', or digital distortion stuff.
    Any ideas what I did, or how I could get the video to work well again?
    Thanks!
    G4 Quicksilver 2002 933 Mhz   Mac OS X (10.4.6)  

    I try to summarize:
    - you may use the de-interlace or the flicker filter to remove interlacing artifacts, as Ian suggests (anti-alias filter is another option to test).
    - you can try Dave's suggestion: make sure the Field Dominance is Lower (Even) for your sequences and Not Set for DV captured clips.
    To check/correct dominance for the input clips in the browser use List View and look at their Field Dominance field.
    To check/correct dominance for the clips in the timeline instead you have to select each clip and Item Properties (cmd-9).
    Corrections are possible using the contextual menu over the field value.
    - as Ian suggests, when the target support is a DVD, it's better to check results during editing on interlaced monitor (TV) connected through firewire + A/D converter/camera.
    - to burn with iDVD you must Export/QuickTime Movie (not: Using QuickTime Conversion).
    I hope this clarifies
    Piero

  • IMovie problem - shaky video after exporting

    I'm trying to make a DVD from some video I shot of a wedding. The movie looks great in iMovie 09, and I simply want to burn it to a disk. The problem is that some of the video clips in the movie become terribly shaky after I export it to iDVD or to QuickTime. I don't know how to stop this - I have the movie just the way I want it in iMovie, but it's practically worthless once I export it. The video is from a new Samsung HD camcorder, model HMX-H200. I think I shot the video in HD. I'm using iMovie 09 and iDVD version 7.0.4. Would appreciate any suggestions!

    Nope -- you have your answer.
    Sounds like you want to put data files (movies) onto a data holder and play it from there.
    I like File - Export - Quicktime Conversion - Change Default to BROADBAND HIGH and hit the options button and change the SIZE to 480x270 if you want widescreen or leave it as is for 4:3.
    Those should play fine on data media like a CD or a data dvd.
    NOW -- if what you really want is your media saved on a DVD so you can play it on a set top DVD player (or any dvd player for that matter....) that's another story.
    Is THAT what you want to do?
    Else - pull the media you've saved on the DATA media and put it on your HD... will play fine from there.
    CaptM

  • Shaky video stabilization effect

    Hi, been creating a ski video and always use shaky stabilization, however this one time it added an effect of a loose screen sort of moving around chasing the skiers. It was awesome. How did I do it? Any ideas??
    like a flying frame with the footage inside the main frame with a black background.

    In iMovie Preferences, turn on Advanced Tools.
    On a clip, clicl the little Gear icon. That will open the inspector. Gor to the clip inspector. Pit a check mark next to stabilization.

  • Shaky Video when Burned to DVD

    Hello all,
    Call me an amatuer when it comes to camcorders. I have a Sony DCR-SR40 HDD camcorder and when I take video recorded on this device, transfer to my Mac, and then edit in HD 6, the video (when played back on a DVD) comes out shaky for action video where people are moving. It is almost like there are tracers when they are moving.
    When the raw footage is played back in its native mpg format it looks fine, and when it is burned using Sony's "One Touch" DVD burn the video is not shaky or look like it has tracers, it looks fine. I am thinking it has to do with the quality of the image being recorded by the video camera and that when it gets compiled/burned to DVD it causes the shakiness. It has done this in iMovie HD 6 and in Adobe Elements 3.0. Is there a fix for this?
    If it is just a camcorder issue, any recommendations for a good quality camcorder to capture sports footage (Football) that would burn great in iMovie and not have that shakiness/tracers?

    >MPEG2 exported from Premeire, to quicktime, to encore
    That is, to me, a backwards work flow
    Mpeg2 is an output format... but you are using it as your source file in Premiere... what is the source of the file?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    You are then exporting to Quicktime... which Encore must then encode to MPEG2 to make a DVD (the VOB on a DVD is a renamed MPEG)
    You are starting with a compressed file... exporting which may add more compression... and compressing again in Encore... it is no wonder your DVD has lost quality

  • HD clips have video stutter after import

    New problem with Sony HDR-SR5 import:
    2 of 10 clips from recent vacation have video stutter/jerkiness upon import. All other clips are fine. The two clips that stutter in iMovie 08 play fine on the videocamera. I have never seen this before. I have reimported the abnormal clips, but no change. The audio is okay; it is just the video Any ideas?
    Mark

    *How comforting* ( for me alas ) to find I'm not alone with this problem.
    Config: iMac-Intel - 2,16MHz, 1Go RAM, 320Go internal drive, 500Go USB external drive, OS-X 10,4,11 ( Tiger ) IMovie 7,1,1, SONY HDR-SR5E
    My first few imports worked fine, then Imovie started to quit and 2 other movie sequences were corrupted ( stuttering image ) no matter how long they lasted or which HDD I decided to store them to.
    Apparently other posters have signaled this to Apple, but that unfortunately does not help us getting on with our respective work.
    It would seem there are only 2 solutions while we wait -
    FCE = hand in wallet, or
    Just copy the files from the SONY directly to a HDD location and wait for the Imovie issue to be solved.
    Maybe unplug my Firewire Presonus Firebox ?????
    All futher comments and possible work-arounds welcome naturally.

Maybe you are looking for

  • Run time error while printing ALV report

    Hi, At the time of printing a report  output we get a dump GETWA_NOT_ASSIGNED. The printer used here is LOCL. The length of the report increases dynamically according to no. of months given in range. In report , there are 3 static columns & no. of co

  • Is there a plug-in for the split screen effect?

    I have a whole bunch of these to do - putting two clips side-by-side simultaneously on the screen. I was just wondering, is there a plug-in that automates this, or makes it a little easier, or do I still have to do each one manually, using the Motion

  • How can I have both date and time for a Date type variable?

    If I have a Date type variable: Date today=new Date(), Is it possible to also give the current time to "today" but still keep the type as Date? I mean , for exmaple I want to store this "today" to database as Date type, and the value in database is "

  • The image colours are broken

    Hi! a have a question about colours management.  i bought brand new iMac and installed adobe photoshop cc, but when i opened it the image colours have been broken. how to fix it? the logo must be orange coloured 

  • Inspire P580 Connecting to Laptop?

    I recently got a new laptop and have moved, so I had to sell my PC. I wanted to keep my P580 speakers, so I brought them in an put them next to my laptop. I took one look and saw a problem. My laptop has input jack thing (The place where you would pl