Camileo H20: How to save white balance settings

Hi,
just got this camcorder and finding my way round with it.
My question is when you change the mode settings to night and change the white balance etc, when you close the screen and the open it again to carry on filming, the mode has gone back to auto and so has the white balance settings.
The other settings stay as how i set them i.e HD or 720 etc. is this right.
Also indoor use under 60w lights is non existent.
Thanks

Hello zackwolf,
yes you are right. Some changes like white balance and so on go to default settings automatically, if you close the screen.
Correct - The other settings stay as how you set them i.e HD or 720 etc.
Maybe a new firmware could fix this, but as I know there is no firmware update available at the moment.
best regards

Similar Messages

  • 6500 classic: how to save "White balance" setting ...

    Hello, when I activate the camera, the image looks like filled with blue, so I need to go to camera settings, click "White balance", and select "Daylight" instead of "Automatic" - now the picture will be perfect. But next time when I activate the camera, I should repeat this step again.
    How to save "White balance" settings to "Daylight" forever?

    Unfortunately it's not possible.
    The setting will only be effective for one session. Once you close the camera application they will revert to default. 
    ...who's more foolish?, the fool or the one who follows him?... ovi-wan

  • How to copy White Balance settings betweenJPG files

    Hi all,
    Due to a stupid mistake I ran half a day in Joshua Tree National Park with my camera set to only save JPGs instead of RAWs... grrrr.
    I have relevant WhiBal shots from this period, but I cannot figure out how to set the white balance on the related shots since the temp scale in the Basic section of the develop module only seems to works with a relative -100 to +100 setting instead of the Kelvin scale normally used in the RAWs.
    Any ideas on how to "copy" and/or set the white balance in a JPG based on the adjusted value from another JPG?
    Any ideas greatly appreciated!
    Claus.

    Hi John,
    Thanx for the suggestion!
    I thought about this and experimented with it. However it seems that when working on JPGs this method just copies any "+nn" adjustment blindly to the target photos without any consideration to differences in the basic color ballance of the target photos.
    I guess the problem may basically be that if the JPGs do not have any saved info inside the file on the assumed White Balance in Kelvin used by the in-camera JPG conversion there may be no way to make such a relative adjustment between two JPG files.
    So does anybody know whether this info is available in a JPG file converted in cameray? In my case it's a Canon 20d.
    Claus.

  • How do I get white balance settings for my Olympus cameras in Aperture?

    I have an E-500 and E-510. I was able to figure out from previous posts how to get the white balance listing in the metadata. The information it provides is a 0 or a 1. My sense is that the 0 could represent the auto white balance setting and the 1 any other setting. I have 7 possible settings for white balance on my camera. Is it possible to get specific white balance settings listed in the metadata for my cameras. Thank you for any help.

    I can tell you how to display it; I haven't set out to find out what the numbers mean, although that would be pretty easy to do.
    Select the Metadata Tab. At the pop-up in the top left select "List-Expanded." Then select from the Gear pop-up in the upper right "Edit List-Expanded." A whole set of options will appear, including White Balance. Check the box and it will be added to the List-Expanded.

  • Open the same raw file in PS5 with two different White Balance settings

    I'm trying to open the same Raw File in PS5 with two different White Balance settings.  One setting "as shot" the other in "daylight", then blend them.  The tutorial I'm watching says to "stack" the images.  The tutorial shows one White Balance setting as the "Background" layer and the other setting as "Layer 1".  I don't know how to do this and the tutorial is not specific.  Can anyone either point me to a step by step instruction or offer some assistance?

    Also look at the "Snapshots" feature of Camera Raw itself.  It allows you non-destructively to keep multiple sets of settings for a single raw file.
    Learning about it far exceeds the scope of what can be done in this particular forum.  I would recommend this book as essential reading:
    http://www.amazon.com/Real-World-Camera-Adobe-Photoshop/dp/0321713095/ref=sr_1_1?ie=UTF8&q id=1313502199&sr=8-1
    Additionally, there's a dedicated Adobe Camera Raw forum:
    http://forums.adobe.com/community/cameraraw
    Wo Tai Lao Le
    我太老了

  • Webcam White Balance Settings?

    Hello,
    I just got a Satellite S855 and I had found at some point an option to change the camera's white balance settings to things like "sunny" and "cloudy" but now I cannot seem to find those options anywhere! I can't remember how I accessed them the first time. I have tried to find somr answers and some mention being able to do it through Skype but I sure can't figure out how. I want to record a video and the white balance is terrible. Any clues? 

    If your webcam is like mine, activate the camera, hover your mouse near the bottom of the picture, click on Settings, click Scene, scroll to the right and you will find Sunny, Cloudy, Rain and Night as well as a few others.
    C.B.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Auto white balance settings?

    What does ACR base the Auto White Balance settings on? How does it determine what it thinks it should be? How acuurate does it turn out for you?
    Thanks.

    How acuurate does it turn out for you?
    Useless.

  • White balance settings always display 5000K 0 Tint

    Been searching on this, found a few things, but nothing helpful.
    In the past few weeks, it appears that Aperture is no longer interpreting my cameras white balance settings properly. The colors themselves are fine, however, the adjustment applet always shows 5000k with 0 tint. I'm not quite sure when this started, but it's quite frustrating. This appears to be happening on everything newly imported. (I can only verify JPG at the moment, as I'm seeing this on a Canon S95 and 60D, which both don't have RAW support yet in Aperture).
    Anyone ever see this happen, or no of a solution? I'm using Aperture 3, latest updates etc. on OS X 10.6.4. My older files all appear fine, it's just these recents, from these two cameras. Unfortunately, I've sold my other gear, and don't have an older cam around to test. Either way, other products, Adobe, seem to be reading things properly.
    Thanks for any input.

    So all these files are JPEGs?
    Note that white balance works very differently with JPEGs and RAW files. There really is no "white balance" information in a JPEG, and you can't adjust them the same way. That's one of the big advantages of RAW files. I suspect once Aperture supports the RAW files for those cameras, then you'll get proper white balance. Until then, with JPEGs you're kinda SOL. It's a bunch more work. But that's the nature of the medium.

  • How to set White Balance details in Metadata Bridge Cs6 shooting with MarkIII 5D ?

    Is there any way to get detailed info of White Balance setting in Bridge Metadata ?  I'm getting only "custom" ; my instructor in College needs more detailed data in my contact sheets.
    Thanks for any imput

    Is there any way to get detailed info of White Balance setting in Bridge Metadata ?  I'm getting only "custom" ; my instructor in College needs more detailed data in my contact sheets.
    Thanks for any imput
    You can't get this info in a contact sheet, neither is it easy to get other then look at the camera setting you have used to shoot the files. Maybe it is somewhere hidden deep down in the exif data but I can't find it with exact numbers.
    Shooting Raw those WB figures are irrelevant because you can set color temperature and tint to whatever you like. Shooting jpeg your options are limited because of the fact the Raw data is already processed and changing temperature and tint effects the whole image.
    Try shoot a Raw and jpeg together from the same scene. One with daylight and one with artificial light conditions. (personally I have set my WB in camera fixed at 5500 but with auto settings you can also see the difference) Try to correct the jpeg and the Raw file in ACR and see what I mean.
    And to be honest, if your instructor at College would like to have this he also should tell you why he wants it and how you can deliver it...

  • How to apply white balance from jpeg to raw version

    I always shoot in RAW + jpeg format.  Many times the jpeg will work fine and I still have the RAW if I want to take the time to tweak things a bit more.
    But sometimes the jpeg stumbles on a white balance that works well for a particular image.  If I want to apply that same balance to the RAW version, I would like to be able to read what that color balance setting (in K degrees I assume) is so I can copy it.
    Is there a way to find that info somewhere?  The exif will only give you the name of the setting (Flash, Auto, Cloudy, whatever...) but not the numerical info needed to apply it in Aperture's White balance adjustment.
    I use a Nikon D600.
    Thanks very much for any info!
    Bo

    OK, progress!
    I found out from Iliah Borg on the dpreview.com forum that the utility ExifTool (or its GUI version pyExifToolGUI) will provide the R, B, G1 and G2 values for the white balance setting.  They are provided as multipliers or absolute vaules.  Example:
    WB RB Levels : 1.51953125 1.8515625 1 1
    WB GRBG Levels : 256 389 474 256
    Now does anyone know how you can enter these type of numberic values in Aperture?  The standard White Balance brick does not have input fileds for these types.

  • How to view white balance data in iphoto '09

    I would like to be able to see the white balance setting metadata for photos in iPhoto '09, but I'm not finding any way to do that.
    The "Show Extended Photo Info" doesn't include white balance.
    Thanks,
    Tracy

    Nines
    Welcome to the Apple user to user assistance forums
    Any chance you could tell us a bit more? re-read your request and see how you would answer it.
    What did you do to lose all of your events?
    What have you done since then to bet to the "starting point"?
    What is the "starting point"?
    Do you have a backup up from before you did what ever you did to lose the events?
    You have to give us a lot more information if we are to help you
    LN

  • Does Lightroom read white balance settings in NEF files?

    I have noticed an interesting difference in white balance color temp using Lightroom vs. Capture NX: In a Nikon D70 RAW shot (with camera white balance set at Direct Sunlight, no fine-tuning) Lightroom shows the "as shot" color temp to be 4850K. Capture NX reads the as shot color temp to be 5200. If Lightroom is reading the NEF w.b. settings, why isn't it reading the K temp as 5200?

    Fred Felder:
    I still have not been able to find the original post (the links I tried to follow appear to be broken) by Thomas Knoll but I found another message which contains the relevant quote:
    Ramón G Castañeda, "D200 White Balance Issue" #13, 30 Aug 2006 3:52 am
    which says...
    >Thomas Knoll - 10:47am Sep 25, 05 PST (#1 of 101) Edited: 25-Sep-2005 at 12:57pm
    >This is the normal and expected result of Adobe Camera Raw and Nikon using different camera profiles and algorithms, and is not a bug.
    >Because of the different camera profiles being used, when matching white balance values Camera Raw can either match the white balance appearance (which colors are exactly neutral) or the white balance numbers (exact Kelvin/Tint numbers). In these cases, Camera Raw chose to match the appearance, not the numbers.
    >Even if the white balance matches, I don't expect an exact overall appearance match since Camera Raw and Nikon software use a different tone curve and rendering algorithms for non-neutral colors.

  • White Balance settings name "Cloudy" Italian version

    Hi,
    the White Balance "Cloudy" settings italian name is not "Nuvolo" but "Nuvoloso". Nuvolo is a forums slang words, it is non italian!!!
    Will You modify it?

    I don't know whether they'll modify it, but thanks for the note, it'll go back to the translation team.

  • Cannot paste white balance settings to all selected raw files

    Hi,
    I select a raw file whose WB I need in order to place it to a whole set of raw files. I press Copy... and make sure WB is selected. then I move to the folder containing the raw files I need to copy the WB to, select them all and press Paste. NOTHING happens.
    What am I doing wrong or is this a bug?
    Thanks,
    Juan Dent

    the only module that has Copy/Paste buttons is the Develop module. If I switch to Library/Grid view there is no Paste button.... then, how do I paste the settings I copied?  Also, what is the Paste button functionality?? Why is it in  the Develop module if it cannot be used there?
    There is more than one way to skin a cat! Library module Photo>Develop Settings (see screen shot). There are even keyboard shortcuts. The Copy /Paste Settings commands can also be found in the Develop module under the Settings menu.
    BTW: In Develop module I would tend to use the Sync button rather than Copy / Paste. Sync will operate on all selected images whereas as Paste will only operate on the most selected image.

  • Need to know how to save printed image settings

    Photo printing setups; when printing a picture you have to make the following settings;
    (1) Select printer.
    (2) Printer Settings.
    (3) Select paper size.
    (4) Select Type of Prints.
    (5) Select print size.
    After doing this printing a draft copy or coming back a few day later wanting another copy printed.
    You go to edit load the file for picture to print, select create and you have to redefine the print all over again, this even after printing a draft copy and its OK and want to print 10 copies, you have to go back to Create and completely reset up to duplicate the draft picture you just printed.
    When save an edited and formatted picture all that is saved is the edited and format digital image file.
    I may want to print the image different sizes, on different types of paper, but Photo Shop doesn’t allow save the printed image files setup perimeter’s and tying the different print image setup to image file.
    So I have to maintain a file folder Excel files that list all the setup parameter’s need to print that uses this the image file as is primary image.
    Have I missed a Photo Shop function, that does this? 

    I thank everyone for the inputs, most if not all has been helpful.  If for no other reason than I am not used to this type photo printing. When most printing I did over my career has been mostly l technical drawings and there most if not all, were black and white and if you got the size printed right it was fine and nobody noticed.  But, now that I have retired I have more problems than before as I am now working more in not just color, but Photo graphs.  Then of course there is the ten years of technology I messed.  How I wish for the days when a program didn’t do what you wanted it too, you write your own code to add the function.  But, now security walls and the complexity of programs today you need a team of 10 programmers’ to do that.
      But, this not being able to sale the values of that print size, let alone color/shading, type paper, manufacture of paper and last but not lest printer and even its model. All of those effect color/shading of a print.  Just to day I have learned that the Application Program, OS driver and the printer can have color correction processingbuilt-n.  It’s no wonder what is on the screen doesn’t match what is printed.  And most of these color “correction” routines can't be enabled and disabled.  It is no wonder printing for one computer running the same Application and printing to two printers on that computer the prints are totally different.  At least now I know about them and know that every time I print the same image file I am go to have start all over  and work up all new printing parameters.  Use to be editing and formatting the image was 80% of the work, now it 20% of the work and printing is 80% of the work.

Maybe you are looking for