CAMILEO P30 - how to use it as a webcam ?

I am to able to turn on the webcam function despite it is advertised
How to use/configure ?
rgds

I have checked cam specification on http://www.toshiba-multimedia.com and also in user??s manuals document but I didn??t find a word about webcam function.
Can you please tell me where you found info about this cam mode? Where is this advertised? On Toshiba page?

Similar Messages

How to use video camer as Webcam?

I have a Sony PD150 and want to use it as a webcam. Does anybody know how to do this? Can this be accomplished with some free software?
Thanks
chephoto

Plug the camera into the mac via firewire. Put the camera into camera mode - as opposed to VCR mode.
Open iChat. It should recognize any firewire input videocamera. iSight is firewire.
The problem you will have, depending on your application, is that after being in standby mode for a while, with no action, will force to camera to sleep. Maybe you can tweak this in the PD150 though and force it to supress the sleep mode. Don't know.
But you've already got everything you need - hardware/software related. Just a matter of whether or not the potential quirks can be eliminated/dealt with.
EDIT: PS - Welcome to the forum....

How to use JMF capture two webcam?

I want to use two camera in the same time. Can I do this? If JMF can't do it please suggest me how to do this.

There is a thread in this forum about your question.
Time to search! :)

Does Camileo P30 SD camcorder support SDHC card

Hi,
I am going to buy this model. I need to know.
Does Camileo P30 SD camcorder support SDHC card?
Can I use 8GB SDHC card in this product?
Please advice.

Hi Roni,
below you can see, which kind of sd card allows how long to record movies or make pictures.
movie files:
4GB SDHC (Class6) - 1:06 h - Full HD (1080p) / 2:13 h HD (720p)
8GB SDHC (Class6) - 2:14 h - Full HD (1080p) / 4:28 h HD (720p)
16GB SDHC (Class6) - 4:27 h - Full HD (1080p) / 8:55 h HD (720p)
32GB SDHC (Class6) - 9:01 h - Full HD (1080p) / 18:03 h HD (720p)
pictures:
4GB SDHC (Class6) - 1.304 pcs. - High (8mp) / 1.778 pcs. - Standard (5mp) / 3.260 pcs. - Low quality (3mp)
8GB SDHC (Class6) - 2.620 pcs. - High (8mp) / 3.573 pcs. - Standard (5mp) / 6.550 pcs. - Low quality (3mp)
16GB SDHC (Class6) - 5.525 pcs. - High (8mp) / 7.125 pcs. - Standard (5mp) / 13.063 pcs. - Low quality (3mp)
32GB SDHC (Class6) - 10.571 pcs. - High (8mp) / 14.415 pcs. - Standard (5mp) / 26.428 pcs. - Low quality (3mp)
best regards

Can I see Camileo P30 picture on notebook like if connect camera to TV?

Hi!
I have notebook with HDMI and Toshiba Camileo P30.
Can I see picture from camera on my notebook like if connect camera to TV?
What software shall I use (cause nothing happens, when I connect my camera)?

Hi
Does your notebook supports HDMI IN port?
If not then you cannot do this.
You need a HDMI port which received the signals like a TV or external monitor

Camileo S20 - How to play all recorded videos?

hi all!
Ive not long had the camileo s20, so still trying to get mt head around it. I think ive managed the basics but im having a problem with play back.
When i recored a video - 6 mins long, but i pause the recording half way through, then go back on to start recording where i left off, during play back it will play the movie sepratlely and i manualy have to start the other half of the video to play.
Is there anyway i can just click play and it plays all my recorded videos continuously? a play all setting?
Thanks

Hi wayne_1,
First of all I can recommend checking the user manual. It contains a lot of informations about your camera and how to use all features.
I have checked the user manual but unfortunately I think such a playback function isnt available. With the playback button you can switch to playback mode and use the left and right button to go to the next picture/movie.
But there is no function about playback of all videos.

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

Can't figure out how to use home sharing

Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
If anyone is able to help me out here, that would be great! Thanks!

The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
Thanks for the help.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to use airport time capsule with multiple computers?

I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
I bought the AirPort Time Capsule to back up my MBP
And so i did.
then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails. It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
this is what i want:
i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
i want to make a new back up of my MBP as if it's a second computer...
so guys and girls, what is the easiest and best solution?
Best regards!

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

How to use multiple ipods on one account

I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How to use a Table View in AppleScriptObjC

How can I use a table view and add data to it? And how can I display a button cell and image cell in the table? Thanks.

Hi all,
Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
for ex : select * from (tab_name) where....?
Can we do inner join on such select statements? If so how?
Thanks & Regards,
Mallik.

How to use '|' delimited as seprator in GUI_DOWNLOAD ? Plz suggest me ,,

how to use '|' delimited as seprator in GUI_DOWNLOAD ? Plz suggest me ,,
i want the output should be seprated by '|' delimited when i download the file.

Hi,
We will pass the seperator to the WRITE_FIELD_SEPARATOR parameter as
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = v_file
write_field_separator = '|'
TABLES
data_tab = itab[] . "Our internal talbe filled with data
Re: Why Function GUI_DOWNLOAD can create XML file but not a flat file?
Award points if useful
Thanks,
Ravee...

** How to use TO_DATE function in Stored Proc. for JDBC in ABAP-XSL mapping

Hi friends,
I use ABAP-XSL mapping to insert records in Oracle table. My Sender is File and receiver is JDBC. We use Oracle 10g database. All fields in table are VARCHAR2 except one field; this is having type 'DATE'.
I use Stored procedure to update the records in table. I have converted my string into date using the Oracle TO_DATE function. But, when I use this format, it throws an error in the Receiver CC. (But, the message is processed successfully in SXMB_MONI).
The input format I formed like below:
<X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">
Value in Payload is like below.
<X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">TO_DATE('18-11-1991','DD-MM-YYYY')</X_EMP_START_DT>
Error in CC comes as below:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_EMP_DETAILS' (structure 'STATEMENT'): java.lang.NumberFormatException: For input string: "TO_DATE('18"
Friends, I have tried, but unable to find the correct solution to insert.
Kindly help me to solve this issue.
Kind Regards,
Jegathees P.
(But, the same is working fine if we use direct method in ABAP-XSL ie. not thru Stored Procedure)

Hi Sinha,
Thanks for your reply.
I used the syntax
<xsl:call-template name="date:format-date">
<xsl:with-param name="date-time" select="string" />
<xsl:with-param name="pattern" select="string" />
</xsl:call-template>
in my Abap XSL. But, its not working correctly. The problem is 'href' function to import "date.xsl" in my XSLT is not able to do that. The system throws an error. Moreover, it is not able to write the command 'extension-element-prefixes' in my <xsl:stylesheet namespace>
May be I am not able to understand how to use this.
Anyway, I solved this problem by handling date conversion inside Oracle Stored Procedure. Now, its working fine.
Thank you.

Sender Mail Adapter - S/MIME - How to use it?

Hi guys,
I am trying to figure out how to use the S/MIME security parameter of the Sender Mail Adapter in PI 7.1.
Could anyone point me to some useful documentation/examples/blogs ?
Or perhaps explain what steps are involved when configuring this parameter?
We are pulling emails from an Microsoft Exchange server.
Many thanks,
Aldo

First of all one sender mail adapter has to be tight with a specific sender email address.
The email has to be decrypted as whole, you cannot decrypt parts of it.
Then you store certificates to secure store in J2EE server and point to it in send agreement, this should be equal to HTTPS setup
Check security guide:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/f7/c2953fc405330ee10000000a114084/frameset.htm

CAMILEO P30 - how to use it as a webcam ?

Similar Messages

Maybe you are looking for