Camileo S20 - recorded file cannot start due to format error

Hi!
I have a problem here. My camileo S20 format is .avi but when i try to put the film on a stick or dvd and play it on my dvd-player it won't start (format error) , i changed the dvd-player and the same problem , i tried to make it .mpg , still no use.
What can i do ? Please help .

If i connect the cam to the tv it work's but if i burn a dvd with the cam videos the dvd-player won't read them .
@masterG : i tried to convert them into mpg , no use . What should i do ? On the dvd every movie i played worked , except this ones.

Similar Messages

  • Error 244: The DataFinder cannot start due to an internal error.

    I have LabVIEW 2010 and, during Windows start-up, this error message pops up:
    "The DataFinder cannot start due to an internal error.
    (244): Please wait till the National Instruments PSP Service is running and try starting the DataFinder again or reboot your computer."
    I have had this error message pop up for the past year so it is a recurring thing. It started showing up a few months after I had installed the LabVIEW program onto my computer, so I am not sure on what caused this message to consistently pop up. I find that it also causes a delay in the starting up of my computer--my other start-up applications will begin to show only when I close the error window. Please help! Thank you.
    Solved!
    Go to Solution.

    Hi xcontradictorx,
    It sounds like the National Instruments PSP Server Locator might not be started. Could you go to Control Panel >> Administrator Tools >> Services and locate the National Instruments PSP Server Locator? Double-click on it and make sure that the service is started. If it is, stop it and start it again (just by hitting the stop and start buttons). If it is not, start it, then go to the Recovery Tab and choose Restart the Service as the action for First, Second, and Subsequent failures. 
    If after change the settings for the PSP service the issue continues I would think that for some reason the PSP service is just being started late for some reason. Could you do a test real quick: disable the DataFinder in msconfig, reboot, then run the DataFinder.exe from C:\Program Files\National Instruments\Shared\DataFinderDesktop\bin. This should place the MyDataFinder app in your system tray (it looks like a yellow gear). 
    If this is successful, then we will need to change the order of startup services such that the DataFinder just starts after the PSP service. 
    Try the following: 
    1) Locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run 
    2) Delete the DataFinder entry 
    3) Add a shortcut of DataFinder.exe to C:\Documents and Settings\All Users\Start Menu\Programs\Startup 
    4) Reboot 
    This should do all the standard Windows Startup (like starting services, etc.) and then launch the DataFinder. 
    One question: do you use the DataFinder at all? Either with DIAdem or the Data Finder toolkit? If not, you could try removing it from the Startup items. Just go to Start >> Run... and type "msconfig". Choose the Startup tab, locate DataFinder, and deselect it. Click apply. This will probably get rid of the error message.
    Patrick H | National Instruments | Software Engineer

  • Error: The DataFinder cannot start due to an internal error

    Hello,
    I get the same error message every time I reboot my Win 7 PC:
    "National Instruments DataFinder"
    "The DataFinder cannot start due to an internal error."
    "Please wait till the National Instruments DataFinder Index Service is running and try starting the DataFinder again, or reboot your computer. "
    I tried finding a DataFinder Index Service in the Control Panel --> Admin,istrative Tools --> Services, as mentioned in this post http://forums.ni.com/t5/LabVIEW/Error-244-The-DataFinder-cannot-start-due-to-an-internal-error/td-p/...,
    but there was none such listed service:
    I cannot find any mention of a DataFinder or a DataFinder Index Service anywhere else on my PC. Can you please help to find out where this error is coming from and how to fix it? As far as I am aware, I do not use this DataFinder. Thanks!
    Regards,
    Brandon

    Hello BrandonVonk,
    The toolkit wouldn't show up in your installed programs list as it is more like a plugin to LabVIEW. Instead, pull up NI License Manager and go to Local Licenses > LabVIEW XXXX > Toolkits and see if it is listed amongst the toolkits you have installed. There should be a geen box next to it to indicate that it has been installed and activated.
    Hope this helps,
    Siana A.
    Application Engineering
    National Instruments

  • TS3992 i cannot have a backup on itunes. it says cannot backup due to an error occured

    When i connect my iphone to itunes, it says cannot backup due to an error occured.. This started happening all of a sudden.. Please find me a solution for this.. I really need a backup of the phone in my laptop.
    Thanks

    Hi Simsan,
    If you are having an issue backing up your iPhone to iTunes, you may want to take a look at the following article:
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Regards,
    - Brenden

  • ITunes comes up saying the iTunes library files cannot be saved. an unknown error occured

    iTunes comes up saying the iTunes library files cannot be saved. an unknown error occured
    what should i do

    Note: Close iTunes completely before doing any of this.
    After getting this error, I found a bunch of Temp files in the same folder as my iTunes library. The thing that stuck me as odd about this was that there were 4-5 of them labeled "Temp File.xml", "Temp File2.xml", etc. and when I tried to select any of them, the selected file(s) would mysteriously disappear. I ended up Selecting everything except the Temp File.xml files, and moving it elsewhere (I actually just put in a new folder in the parent folder).
    I then deleted/"Move to Trash"ed the folder that used to contain my Library, and renamed the new folder to have the same name as the old folder.
    Then I clicked on the iTunes icon (hold down option/alt from before you click, until the "choose library" dialog appears), and chose my old iTunes Library. This re-linked my old library and restored it to how it was before error (-48) started rearing its ugly head.
    (Windows users, when you re-open iTunes to link your library back in... you double click the icon, then immediately press-and-hold "shift" until the dialog appears)

  • Anyone know about this? "The iTunes Lirbrary file cannot be saved. -54 error message

    I lost a drive, but had a back-up, so I started with the new drive, formatted Mac Journaled, copied the songs and iTunes Library over and got everything working (I think). Now I'm getting this message and I'm not sure what to do: The iTunes Library file cannot be saved. Unknown error occurrec (-54). Anyone???
    Thanks in advance.
    Randy

    Hello, Randy. 
    Thank you for visiting Apple Support Communities. 
    This sounds like a permission issue with your iTunes Library folder.  Here are a couple articles that will help you troubleshoot this issue. 
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Troubleshooting permissions issues in Mac OS X
    http://support.apple.com/kb/HT2963
    Cheers,
    Jason H. 

  • The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared.  I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music li

    The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared.  I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music library.  The library does not show up even when my iPad is connected to my PC.  My entire library is now held on my iPad and I wish to have it in iTunes so I can sync my iPhone to it as well.  Help?

    Don't know what changed today but it downloaded and installed on the shuffle. So far so good.

  • The iTunes library file cannot be saved an unknown error occured (-50)

    Eever sincd June 29th I have gotten the following error message when trying to sync my ipod
    "The iTunes library file cannot be saved an unknown error occured (-50)' and the library does not update. I have re-installed (repaired) iTunes. It doesn't help.
    Any advice. I subscrive to a lot of podcasts and i can't update anything.
    Help Please

    Just letting you know that I have also had that problem since downloading that "update" for itunes.
    All of my new music that I have tried to transfer from my E-music file will not be accepted. error -50 keeps popping up.
    I have seen a few others post this same question, but I have been unable to find an answer for it.
    If anyone has come across what this problem is, please help.

  • HT201210 trying to update my phone and it says cannot update due to unknow error any help

    i was trying to update my iphone 4 and it says cannot update due to unknow error any help ?

    Hey alyreed22,
    Thanks for the question. I understand you are having issues updating to iOS 7. The following articles may help you resolve the error message:
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/TS1275
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Thanks,
    Matt M.

  • The disk cannot be partitioned because some files cannot be moved is the error?? please help

    i want to donwload windows and i have a cd for it but the disk cannot be partitioned because some files cannot be moved is the error.please help i dont have the cds that came with the imac . can time machine work for this?

    You will need to get the original DVD that came with your iMac it you are using Mac OS X 10.6.8 or if you have the Snow Leopard DVD that will work.  Follow these instructions,http://support.apple.com/kb/HT2414 

  • I am getting a message that "the i-tunes library file cannot be saved. an unknown error has occurred." what can i do?

    i am getting a message that "the i-tunes library file cannot be saved. an unknown error has occurred." what can i do?

    Have been able to resolve this issue?... I have just exeperienced it and not happy that I can't resolve it.

  • I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

    I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • AIR 3.9 and iOS7 Build Release .ipa File Cannot Start

    I build a release build .ipa file and installed on iPad running on iOS 7.0.3. But weird because my app stuck on start screen with my logo.
    Debug .ipa file is running correctly, just problem with the release build .ipa.
    I build using Flash Builder 4.7. If I build using IntelliJ IDEA the app icon grayed and cannot be opened.
    Any idea what's going on with my build file?

    You're right, I didn't realize if there's an error on the top of my debug console:
    MATE Error: Method not found, turn on the debugger for more information
    EventType:config event. Error was found in a EventHandlers list in file ApplicationEventMap
    I'll try to fix this. But on my recent build, the file cannot be installed successfully on iOS7. The icon turned gray and when I press the icon, it will shows "installing" forever.
    ---UPDATE
    No error anymore on debug mode. But still the same problem
    And the "installing" forever problem was because I use wrong provisioning key.
    Once the application start, it stucks on splash screen just showing my logo. I've wait for a couple mins but nothing happened.

  • Dropbox cannot start due to Adobe Acrobat XI Pro

    ******BUG******
    Concise problem statement: Dropbox will not start due to Adobe Acrobat XI Pro. I have to enable sharing of the temp folder everytime I start Windows. It is very annoying. Please read below:
    Hi Preston,
    Thank you for contacting Dropbox support!
    We've identified that a version of the Adobe application apparently modifies the permissions of the Temp directory. This directory is used by several applications, including Dropbox, to start up, install, and uninstall. You can read more about this here:
    http://forums.adobe.com/thread/1159899
    If you have Adobe Acrobat XI installed please follow these instructions, if not let us know.
    In order to fix this issue I'm going to ask you to go to the Temp directory and make sure your user has "full permissions" over it. To accomplish this follow the next steps:
    - Open a Windows File Explorer (not Internet Explorer)
    - Type %LOCALAPPDATA% into the navigation bar (include the % percent signs).
    - Then right click on the Temp folder and go to properties. Select the Security tab.
    - Once you're in the security tab select your user and make sure the user has full control of the folder. You can see this in the following image:
    https://www.dropbox.com/s/jrqdf4gnqrgojdy/Screenshot%202014-02-03%2010.29.03.png
    - In addition to that go to "Properties" -> "Security" -> "Advanced" and select "Enable Inheritance" and "Replace child object ...". The image below shows the screen:
    https://www.dropbox.com/s/w0y7caz0i91g3q7/Screenshot%202014-02-03%2014.08.57.png
    When this is done you should be able to restart Dropbox.
    Please let me know if you have additional questions.
    Best,
    Christopher

    update to the latest version of acrobat xi pro.  if that still causes this issue, report your bug, Adobe - Feature Request/Bug Report Form

  • "User names cannot start with a number" error while adding a user

    Is it possible to use WL Portal 7.0 admin framework to manage users with all numeric
    user id ?
    I got an error "User names cannot start with a number" while trying to add users
    with all numeric user ids. I am using "portalAppTools" web app provided with WL
    7.0 out of the box.
    What "out the box" functionality do I need to change to make this happen ? Thanks
    Shah

    The problem is that when we have user groups starting with a number, then the search
    feature doesn't work for user groups (case # 466837 with BEA).
    So, which brings me to the following question:
    a. Should the search feature work?
    b. What is the limitation? I mean, it is designed not to allow user groups starting
    with a number. So, there must be a reason for this. So, if we change "disallowFirstCharDigit",
    will it have any impacts on Portal?
    As an aside, it seems somewhat strange that the Portals can start with a number!
    Thanks in advance
    Venkatesh
    "Ture Hoefner" <replyto@newsgroup> wrote:
    Hello Shah,
    Search your tools web app for the UsermgmtTools.properties file. In
    my
    installation, it is at:
    D:\bea70sp1\weblogic700\samples\portal\sampleportalDomain\beaApps\sampleport
    al\tools\WEB-INF\classes\com\bea\jsptools\p13n\usermgmt\servlets\jsp
    It starts with this:
    # Messages and other properties used by usermgmt jsp tools
    # Name properties - UserBean and GroupBean
    disallowedCharacters: ~`!$%^&-*() {}[]|\\/?<>,:;+="'
    disallowFirstCharDigit: true
    Ture Hoefner
    BEA Systems, Inc.
    www.bea.com
    "Shah Sidi" <[email protected]> wrote in message
    news:3db0a001$[email protected]..
    Is it possible to use WL Portal 7.0 admin framework to manage userswith
    all numeric
    user id ?
    I got an error "User names cannot start with a number" while tryingto add
    users
    with all numeric user ids. I am using "portalAppTools" web app providedwith WL
    7.0 out of the box.
    What "out the box" functionality do I need to change to make this happen?
    Thanks
    Shah

Maybe you are looking for