Camileo x-sport: Can I connect external mic to micro USB

Hello everybody,
I need to record audio with a lavalier microphone.
Can i connect an external microphone to the micro USB of the Camileo x-sport to record audio ?

The micro-USB 2.0 port is a computer interface. This means that this port will be used in order to connect the camera to notebook or computer.
The camileo x sports supports an internal microphone and its also possible to increase the mic sensitivity using the option within the settings menu.

Similar Messages

  • Can't connect external projector to MacBook Pro running Windows7. Any suggestions?

    Can't connect external projector to MacBook Pro running Windows7. Any suggestions?

    Did you try a cable? The point is you did not provide any information about: what projector, how you are trying to connect, what happens when you try, error messages if any, does an external monitor work, what computer you have, what OS, etc.

  • How can i connect 24VDC to digital input (usb 6008)

    hello,
    how can i connect 24VDC to digital input (usb 6008), is it possible with some optocoupler?
    thanks

    The 6008 is a static DIO, so speed shouldn't be an issue.  Therefore an optocoupler should work.  Just make sure you get one the meets your specs.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

    Dear Community,
    how can I connect SCSI tape recorder via USB to iMac ?
    Is there any adapter/converter on the market now ?
    Cheers, Marek

    Thanks Jan.
    Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
    I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
    Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
    Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
    My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
    Best regards,
    Marek

  • My apple tv3  is not powering on.  Connected with Computer, with micro USB cable with power on, it is not shown in Devices.  How to rectify

    My apple tv3, serial no. C07JWBZ9DRHN is not powering on.  Connected with Computer, with micro USB cable with power on, it is not shown in Devices.  How to rectify

    You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • How can I connect external microphone to MacBook Pro?

    Hello!
    I need to connect the external microphone to my MacBook Pro? How can I do it?

    Some mikes have sufficient output to connect to this port, Alexey, but most don't. the solution, if you really want to use this particular mic, is to obtain a small battery or mains powered pre-amplifier to connect between the microphone and the line -in input. Alternatively there are devices which will allow you to connect your existing mic through the USB port. If you have an amplifier with a mic input already you could also use this as an intermediary, though it won't be very portable, of course!
    You may find it cheaper to simply buy either a USB or "line level" mic, though.
    Cheers
    Rod
    Cheers
    Rod

  • How to connect extern mic in to input

    How to conect extern mic (Shure sm58)and use it with prologic ?

    You could use a small mixer with appropriate cabling, or an actual Audio Interface that's designed for what you want to do. The SM58 is a low impedance Mic and needs a mixer or audio interface.

  • Can i connect imac and macbook by usb?

    can i connect imac and macbook pro by using USB clable? i just want pass my files and music from macbook to imac.
    thank you

    You can't connect both computers by USB. The easiest way is to connect them using a FireWire cable (if your iMac and your MacBook Pro have got FireWire ports), and put your MacBook in target disk mode (start your MacBook holding the T key).
    Doing this, the iMac will detect the MacBook's hard disk as an external disk, so you can easily access to your files from Finder and copy the data you want to the iMac's hard disk

  • Can I connect firewire cable to a usb dvd drive

    Can I connect firewire adapter or cable to a usb dvd drive to install tiger cs when I tried installing with just the usb dvd drive didn't work so can I connect a firewire cable or adapter

    No.

  • How can i connect the printer without a usb?

    I have recently changed my internet provider and have tried to reinstall the printer software but it wont find the printer and says that i need a usb cable which i dont have. Can i connect the printer without one? Its a photosmart all-in-one c4380 printer.

    Have no idea, no model number of printer.   You can always buy a USB Printer cable. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Can't connect to Blackberry Link with USB

    My Z10 will only connect to blackberry Link through Wi-Fi, when I turn Wi-Fi off and plug in with a USB cable it says not connected. I tried removing it then adding it again, reinstalled Blackberry Link, rebooting computer restarting phone nothing seems to work. I want to backup my phone but can only do it with a USB cable. If anyone has had this problem and solved it could the please help?

    Perhaps this is too late for those with the problems connecting Z30 via USB in BBLink.
    Anyway, the definitive solution is as follows: (this only applies to Windows)
    1. Uninstall the BB Desktop Software 7 (BBOS) from your computer, and have only BBLink. (it is said that you can run both BBOS Desktop as well as BBLink on the same pc however, if you do, BB10 devices will only connect through Wi-Fi and won't be able to back up. this is because the BBOS Desktop driver has priority over USB network interface.
    2. Once BBOS Desktop is uninstalled, then turn the wi-fi 'off' in your BB10 device, then turn off the BB10 device, then connect the said device via USB, and when you do this, your computer will automatically pick up the driver from your BB10 device, and your device may reboot (if not just turn it on and wait couple of minutes).
    3. Open BBLink, and wait for the password prompt screen to log into your BB10 device.
    That's it, all done. Thanks!

  • Can I connect a drive via eSata/USB to one connected to MBP via FW800?

    I have a drive that only has USB/eSata (Drive 1). I have another drive (Drive 2) that's got USB, eSata, and FW800... it's currently connected to my MBP via FW800.
    Is the following possible?
    Drive1===>USB/eSATA===>Drive2===>FW800===>MBP
    The purpose of Drive1 is only to back up the contents of Drive2, I do not need to transfer anything directly from the MBP to Drive1.
    Questions:
    1) Is this possible without errors?
    2) If so, what performance can I expect?
    3) Which is safer/better, using USB or using eSata?

    No. Although drive enclosures may have pass-through ports they are for daisy-chaining via the same port. Also, you cannot connect the drive by more than one port at a time without causing a potential dangerous condition for the drive. However, you can connect separate drives by separate ports. That is you can have one drive connected by FW, another via USB, and still a third by eSATA (if you have the requisite ExpressCard/34 card.)
    Which is better? From fastest to slowest; eSATA, FW800, FW400, USB 2.0, USB 1.1.
    The ideal method for accomplishing you stated goal is to get a two drive enclosure populated with two identical drives. Use Disk Utility to create a mirrored RAID array. What ever is saved to the array volume is mirrored on both drives automatically. The array should not be used as a startup volume, but it can be used to backup a startup volume.

  • ATV3 not connecting to iTunes via micro USB

    So I have connected my micro USB to the ATV3 and Widows 8.1 installed driver software in order recognize, but it won't show in "This PC" or even in iTunes itself. I do have the power cord plugged into the ATV3 when trying to connect to PC. So why can't I see it?

    I'm assuming you followed the specific power instructions here:
    Restoring your Apple TV - Apple Support
    If so, try again with any superfluous USB devices/hubs disconnected.
    Also possible you have a power only microUSB cable that is used for charging but which does not tramsnit data.

  • Can you connect external HD to time capsule and use it as NAS?

    I have a Time Capsule which I uses to back up my family's mac.  I also have an Airport Extreme to extend the range.  I have no problem reversing the function as to have the Time Capsule extend if need be.
    My wife's old Power PC display took a crap, and we're thinking of getting the new MacBook Air.  Unfortunately this means space will be a premium.  We're wondering if it is possible to connect an external HD to either Time Capsule or Airport Extreme to use it as NAS?  We plan to move all our videos, mainly home video, and iTunes library to it and have the whole family access it from there.
    There are few problems I might see.  While me and my wife share the same iTunes library, my little sister totally have different library.  I'm sure some songs overlaps.  Is there any way to consilidate this without having overlaps?  Also, is it possible to still organize it so I only have my current library sync to my iOS devices without manually managed music?
    I have a few old HD from my macbooks that just sitting around.  One is 250GB and the other is 320GB that I'd like to see it getting some use if possible. 

    I can't answer all your questions, but what you propose sounds feasible.  You should find additional advice in this article.

  • How Can i connect external hard disk to Ipad?

    I want an information or procedure how should i connect my externl HD to I-Pad 4

    There are some wireless external hard drives that can be used with the iPad.
    Best iPad External Hard Drive Storage Options
    http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
    iPad Storage Solutions
    http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
    SanDisk Connect Wireless Media Drive
    http://www.sandisk.com/products/wireless/media-drive/
    WD My Cloud
    http://www.wdc.com/en/products/products.aspx?id=1140
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
     Cheers, Tom

Maybe you are looking for

  • I still can't reset my i phone

    So why I can't reset my iphone  is there a way for it  please

  • What sequence to be followed to move tranport req's  from r/3 dev- quality

    Hi all we are having our landscape as r/3 dev      -> bi dev r/3 quality  -> bi dev r/3 prod    -> bi prod we are now in development and moving all our transport requests from r/3 dev -> r/3 quality. and our r/3 quality will be connected to bi dev. w

  • Bank interface

    Hi all, We have a requirement of creating a citidirect interface format for sending the payment details of the employee to citibank.  Should we require ABAP programming for this? Is there any format existing in SAP to copy and change the format.  Ple

  • Configuring Clients to Share Net80 Configuration (TNSNAMES.ORA)

    I'd like to setup all client net80 connections to share a TNSNAMES.ORA file. I have tried adding the regestry key TNS_ADMIN to HKEY_CURRENT_USER|ENVIORNMENT key but have had no success. Not sure if it should be entered as a environment variable, I ad

  • How do I bring in 16 bit audio?

    Having trouble importing 16 bit audio into imovie 11. Also, shot 16X9 and video imports as 4X3. Any answers?