Camileo X-sports - no thumbnail files using 1080p 60fps

Hi everyone:
I've recently bought the camileo x-sports. It's a nice camera but i found one problem with it:
It is supposed that with every video or photo that it takes, it creates simultaneously anoher smaller sized file, named as "thm".
The problem is that my x-sports does not create that file for videos in 1080p 60 fps, but it does for 30fps.
Whats the problem with it?, i tried solving it updating the firmware, but it did not result.
Thank you for your time.
Enrique.

The thm file extension means thumbnail image file and this is a quick snapshot of your video.
Besides the original recorded video file (VID00001.mp4) a smaller sized video file (VID00001_thm.mp4) will be created during video recording.
This file will be used for faster video content transfer with your WiFi APP from the camera to your tablet / smartphone device and further to upload your videos and photos to social networks with your WiFi APP.
Obviously the snapshot isnt created due to the double frame rate and I guess this happens because the 60fps file is much bigger and probably 30fps videos file quality is good enough to watch it on your tablet / smartphone or for upload to social networks, etc

Similar Messages

What frame rate timeline should I use for 1080p 60fps premiere pro

When using 1080p 60fps clips what sequence should I use when creating a timeline that would work the best for slow mo application?
I read that you should use a 24 fps timeline but i'm not sure?
Also I have a few 720 @ 120 fps, should I create a separate sequence for that and what kind of timeline should I use since cs5 only has 1080 @ 60fps option?

24 is a good frame rate for most animations but some people like 30 and for the max stress on user systems and animation smoothness, use 60.

Problem recording videos with Toshiba Camileo X-Sports

Hi there,
I recently just brought the Toshiba Camileo X-Sports so am fairly new to how the camera works.
As the title suggests I am having some issues recording.
Right I'll try and explain the best i can
The reason I purchased this device was mainly to be used as a car safety cam (crash cam) as I'm a taxi driver, I drive around 200 miles per day and people's ability to drive sensibly is just getting crazy now and having video evidence if the worst should happen would be amazing. Other reasons was for trips out on my motorcycle and also being able to take this cam under water.
I received the X-Sports on Wednesday, placed the memory card in and hit format card to ensure the card was correctly set for use with the X-Sports
I then read through the manual to see what settings would suit my needs best... I came across looping video.
Here's what the manual says.
Looping Video
Looping Video features recording a continuously looping video that overwrites itself until you stop it.
Looping Video feature includes:
OFF - Default
Max - Depending on the maximum capacity the camera records a certain number of videos based on 15 minutes files, then deletes the first 15 minutes file to continue recording a new video.
5 Min - Camera records 5 x 1 minute file, then deletes the first 1 minute file to continue recording a new video.
20 Min - Camera records 4 x 5 minutes file, then deletes the first 5 minutes file to continue recording a new video.
60 Min - Camera records 4 x 15 minutes file, then deletes the first 15 minutes file to continue recording a new video.
120 Min - Camera records 8 x 15 minutes file, then deletes the first 15 minutes file to continue recording a new video.
So upon reading this I though right as I have a 64gb card (Samsung EVO 64gb Class 10 U1 micro SDXC) I will put the setting on Max and then if ever I needed to recall a video i will have a decent chunk of the day stored on the memory card leading up to the event.
I took the camera out with me on Thursday just for an hour and when i got home i took the memory card out and placed it into my laptop to view the recordings and this is where my problem comes in.
The first 15min video plays back fine but every file after that will not play. when i open the memory card file the first video has the preview style thumb nail where as the rest of the video files do not.
I then searched online and come across this website looking for answers.
some of the info i read was that 1080 60fps was causing some problems with recording and playback and to turn down the fps to 30fps, also that the stability control was also a possibility for these issues.
So last night i went through and made the necessary changes to my settings 1080 @ 30fps and no stability control. I then set the camera up in the living room for 45mins as a test. i then tested the recordings on my laptop and hey presto it worked. 3x 15min videos all playing back as they should Great stuff
This morning at 5am i left for work taking my shiney new cam with me, happy in what i might capture on today's drive and also be satisfied that my camera is functioning as it should.
I get home, stick the memory card into the laptop and I'm back to square one. my first 15mins was fine and all others were unable to playback. I also tried the memory card in my PC and still had the playback issues.
Does anyone have any ideas or shall I return this as faulty?
Sorry for the big post but wanted to put as much info as possible!
Thanks, Leon.

Problem Solved
Camera returned and replaced with a Kitvision Edge HD30W

EXPORT LONG FILES IN 1080p for Windows Media Player

Hello, need some help in exporting and encoding some large files from Premiere CS6.
We have 4 Sequences, each totalling 45minutes in length and in 1080p (ProRes422).
We need to export and encode for Windows Media Player as quickly as possible.
Looks like each export is going to take over an hour from Premiere as "Match Sequence Settings"
-keep in mind there is NO AUDIO.
Once it's out of Premiere as an MPEG, I can transcode to any format. Ultimately WMV would be optimal,
but we need to transcode the MPEG into a MOV file before 'Episode' will accept it, just to make the WMV files.
Target files: (4) 1080p Windows Media Player compatible files
Does anyone have a better workflow workaround? Midnight hour and need help!
Thanks in advance,
Dan

Thanks Jim, I can't export to WMV out of Premiere or Media Encoder. I use Episode to make my WMV files, and since Episode doesn't take MPEG in from Premiere (sigh)
I have to first make them in Quicktimes..
But yes! Anything Windows Media Player can handle... should I just go with the 5GB MPG files? No way for me to test, I'm on a Mac and these are playing on a PC
thanks for your help

Camileo x-sport: Can I connect external mic to micro USB

Hello everybody,
I need to record audio with a lavalier microphone.
Can i connect an external microphone to the micro USB of the Camileo x-sport to record audio ?

The micro-USB 2.0 port is a computer interface. This means that this port will be used in order to connect the camera to notebook or computer.
The camileo x sports supports an internal microphone and its also possible to increase the mic sensitivity using the option within the settings menu.

Fog around the lens in Camileo X-Sports

I'm very carefull to load the camera at home and even add a dry "moisture pad" in the camera but after a few minutes (5) in the sun I get a fog circle just around the lens. I have to open the case each time.
This part of the camera becomes warm and I guess this is the fog reason but it ruines all my videos.
Any other way to prevent the fog besides from the inserts? Is my camera faulty ?
My first camera was replaced due to a freezing issue but didn't noticed the fog problem, but it was not so warm than now.

Hi alfot
Don’t be afraid about the fog around the lens.
It seems to be nothing unusual using such action cams within the case (not only the Camileo X sports but other cams like GoPro, etc…)
The warmness may be forcing any moisture in the case to condense on the lens cover.
To prevents this you might use some anti-fog inserts.
Take a look into this thread:
https://forum.toshiba.eu/showthread.php?81681
Greetings

Camileo X-sports freezing

Hello,
I have recently bought a Camileo X-sports.
It appears to freeze randomly but regularly when filming. It always happened with the case on.
The recording stops and none of the buttons respond anymore.
Each time I had to remove the battery to reboot it.
Which I could not do in my surfing sessions :(
First I thought it was from my old micro SD card so I changed it to a brand new class 10.
Is there something I can do or should I contact the provider for warranty?
Best Regards and thanks for your help,
Xeniluom

yup! I had the same problem at first, i have the Samy EVO class 10 32G SDHC.
It's usually brilliant, actually it works fine with the 50 fps, 30 fps and even the 720p 120 fps.
However i found the problem easier than most people simply due to sheer coincidence.
I left the screen on while recording and right before i stopped recording (btw it never froze in my case it just stopped recording) and the screen displayed "low speed card"! what do you know!
I researched the issue and it turns out the Samsun EVO was a bit slower than what the camera required at 60 fps. at 50 fps it barely stopped recording once.
SanDisk Micro SDHC Extreme Class 3 32GB SDSDQXN-032G-G46A
This card is a relatively cheap one, it is a UHS class 3 which mean it's an Ultra High Speed card. The class 3 is a great ranking. It's like 10 Euros more expensive than the Samsun and from what i've read works great with the GoPro hero 4 while shooting 4K & 1080p at 120 fps so it should hold up very well.
It was never the upgrade or downgrade of the software. Lucky i left the screen on!

Camileo X-Sports - missing dashcam mode

The Camileo X-Sports is great action camcorder but I miss the dashcam mode - recording in loop with date/time shown that starts automatically after detecting the charger or motion.
There is a Video Looping option but it uses the memory that was free while starting the recording.
Is there some hidden option to activate even just the loop because it looks like just a slight modification of the Video Looping option is needed (loop using the entire memory)?

Is there some hidden option to activate
No, as far as I know such mode isn't available...

Pdf converter only makes thumbnail file

I'm working with Photoshop CS4 & Acrobat 8 and trying to create a pdf by using the Adobe pdf converter print driver. I print the PS file to the Adobe printer and many times only get a thumbnail file. Sometime I get a full size file - other times just a thumbnail. I've tried all different permutations and can't consistently get a complete file. It's driving me crazy - so much so, that I've had to install a third party pdf converter which (so far) appears to be working fine. Has anyone else run across this ptoblem - and/or suggest a fix.
Thanks in advance.

CeeJaa@Mac wrote:
switch platforms ad upgrade to Acrobat 9 Pro. That'll fix it.
I suspect you're right. Good luck.

Ap.thumbnails file doesn't get smaller

when the underlying project is reduced.
I have a project in which I removed ~ 70% of the files and noticed that the size of the AP.thumbnails file for the project remained constant at 231 MB. I created a new project moved all of the images to it and the AP.thumbnails file is 27 MB. Any ideas why the original one wasn't reduced?
I'm using GrandPerspective to look at the underlying file size quickly, but the shell should show the same.
---rick
BTW I care since I'm rsync ing to a JungleDisk that connects to Amazon's S3 service and my Cable upload speeds are abysmal (45 KB/sec)
Dual 1.8 G5 Mac OS X (10.4.8)

I would guess that the thumbnails file grows but does not shrink. You have probably inported lots of images and then deleted many of them.

Workflow improvements for thumbnails, files, archives, etc

I hope this does not duplicate previous requestes - I am a relatively new user of bridge. Maybe the features I wish are part of bridge but I cannot find them :-( These requests are useful to improve the work flow immediately after a process a large number of images (maybe a few thousand) from an event such as a wedding, speed skating competition, dance production, or car race. The objective is to rapidly allow the selection of images that are to be grouped for edit/delete/copy by examining thumbnails and slide shows.
1. Thumbnails are too small on a 1280x1024 or larger screen. It is difficult to compare adjacent images. It would be nice to allow the user to specify thumbnail size. The thumb data base should match the chosen size. However, it would be adequate if only new images added to the data base have the new size. It is difficult to use the Preview window for judging when images are separated.
2. Rename of files should allow the use of the EXIF date/time created. Time is important if multiple cameras are used in a photoshoot and it is desired to put all images in time sequence. The present rename only considers a file attribute of year/mo/day and forgets about the EXIF date/time shot.
3. A simple "select" or "tag" of images (such as the CTL/S key) would be useful that does not update information as does Labels and Ratings. Typically, this would be used for selecting files that are to be deleted, copied, etc. Teamed with the larger thumbnails and the slide show, this would be a very convenient tool for selecting images for editing / processing purposes. Yes, you can CTL/CLICK to do this in windows, but that is inadequate (see point 5 below).
4. If the slide show is used and then exited with the ESC key, the thumbnail directory list should be positioned to and highlight the last viewed item. This highlight should be different than "select" - it is a position reference only. For example, I could be selecting images by viewing thumbnails but use the slide show (see 5 below) to view/select a series of images. The logical place to show where you "are" is in the thumbnail view.
5. Any Labels, Ratings, or "select" (as in point 3 above) should be settable from the current image viewed on the slide show. The slide show is nothing more than a "giant thumb view".
6. The thumbnail data base, if saved in a mounted directory, should be accessable and viewable in read-only mode even if the actual disk drive containing the images is not on-line. For example, it would be nice to view all thumbnails from my four archive hard drives even though they are normally turned off.
It would be even nicer if BRIDGE could sense the fact that the drive has been turned on and then allow full image access. A super smart feature would be a prompt that tells which drive label (maybe even a CD label) should be mounted. If this were done, I could receive a print order for image TF123456, look through the always-available thumbnails, click on the desired image for CS2 editing and have it tell me "please mount disk with label 0246-20040315". After I turn on the hard drive or mount the CD, CS2 magic would continue.
tony
http://www.tphoto.ca

>2. Rename of files should allow the use of the EXIF date/time created.
I think you'll find that this exactly what you do get when Date Created is chosen. In Bridge Date Created refers to the time the image was captured, which is the same as Exif date/time created.
You can find a downloadable listing of Bridge and Camera Raw keyboard shortcuts at
Jeff Schewe, "++ Adobe Bridge and Camera Raw Shortcuts ++" #4, 28 Apr 2005 11:10 pm
These should help you with Slideshow and many other features that you can't find via the menus or the interface itself.

I need to export Quicktime files using the PhotoJPEG, MJPEG-A, or DV codec. Is this possible in Final Cut Pro X? In the options under export I don't see any of these available.

I need to export Quicktime files using the PhotoJPEG, MJPEG-A, or DV codec. Is this possible in Final Cut Pro X? In the options under export I don't see any of these available. I'm a newbie to this so any help would be greatly appreciated.

I'm importing .MOV files from my Canon 5Dmk2 at 1080p. So should I just export using a different codec and then use Compressor or MPEG Streamclip to convert to an MJPEG-A or PhotoJPEG codec?

Thumbnail File

I have a 16G Thrive. Of that there is about 10G for my use. A check of the file manager tells me I'm using over 9G of that space. But when I add up what I think I'm using it only totals about 6G for my pictures, movies and a few other small files that only amount to a few K. Pretty much all that space is for the movies.... the picture file is only about 260M. I also have a 16G SD Card in use and on it I have a few movies and a picture file with a good many pictures. The picture file on the SD Card is about 2.5G. After looking for a while I found that the Thumbnail folder (sdcard/DCIM/.thumbnail) is using something like 2G.
So.... I have about 15 movies total and a little over 2.5G of pictures total. Why in the heck is the Thumbnail file (sdcard/DCIM/.thumbnail) nearly 2G when the picture files themselves aren't that much larger?
I'm new to Android and maybe this is an obvious question. I do have multiple video players installed (MX Mobo) and there are multiple apps that can view pictures. Do they all have separate entries in the DCIM folder with some kind of hidden attribute that the built in file manager and ES File Explorer don't show?

Wow, it's been a while since I asked this question. I'm surprised you read it but thanks. As to deleting the file.... seemed like a good idea to me too. I deleted it over and over and it kept being rebuilt. Finally I gave up and forgot about it. Well I just checked and the file is no longer that large. As a matter of fact it ain't even there. I can't even tell where the thumbnails are. When I do storage usage checks with both Astro and ES neither show any folders of any significant size other than my folders... movies pics etc. But the thumbnails for my movies and pics all work just fine. So I haven't a clue what caused the giant thumbnail file or what made it go away. I did decide I like MX reader better than Mobo so I uninstalled Mobo but hard to believe that would make a difference.

Thumbnail files problems in windows 8.1 , annoying me ?

I use Windows 8.1 and every-time I open folders that contains Thumbnail files , especially PDF files , take a long time to load them in windows explorer as if open that folder for the first time , and this also happen if I press refresh by mouse
, this problem annoying me , please help
Mohamed Ahmed Database Administrator & Developer

This web site is for help in writing apps, it is not for help in using Windows.
For help in thumbnail generation, contact the author of your default program for the pdf file format.
Visual C++ MVP

Making a .EVO and .MAP file using DVD studio Pro..............

I am trying to make a .EVO and .MAP file using DVD Studio Pro. Please dont respond to this if you have no idea what this is. Dealing in real HD situaiton....trying to find a quick and dirty way to make these files as placeholders, was hoping DVD studio Pro could do it. Thanks.

you cant make them using DVD Studi pro, since they are for TRULY 1080p (23.98fps) projects using vc1.
funny thing is if you know about these files, you would also KNOW that DVDSP does not do this!
i have seen this files on the toshiba GUI but have not seen them with the blu-ray authroing compile.
also, i am going to have to say that if you are TRULY "Dealing in real HD situaiton." you wouldnt NEED DVDSP.
so ease up with the chip and if you have a REAL question ask it, if yo uare just here to show your feathers.. not interested!

Camileo X-sports - no thumbnail files using 1080p 60fps

Similar Messages

Maybe you are looking for