Campaign Automation not working in CRM 2007

Hi folks,
I created a Campaign in CRM 2007, saved it and when I click on Campaign Automation button, it just opens up a blank grey screen with an 'x" mark on top left. Can anybody tell me what could be going wrong. I am using IE 8.0 and the SAP GUI with patch level 17.
Thanks in advance for help!!
John

Hi Vivek,
Thanks for your response. Yes the note you provided solved my problem. Thank you.
Hey, I have a similar kind of issue while trying to create a Mail Form.
I search for a particular mail form, after finding it, I select and click on "copy" icon, then it gives me a pop-up where I give the new name and click on "copy" button. Now it takes me to a new Mail Form screen.
My issue is, on this New Mail Form screen when I click on "save" button, I get "error on page" at the left bottom task bar.
And if I try to do anything else on this page, the error is the same and no click works. As a result, I could not save the new Mail Form. Can you advise, what could be the reason for this IE error??
I updated java applets and using IE 8.0. Still the same.
Regards,
John

Similar Messages

Re-execution of campaign Automation Not working

Hello
We are using Campaign Automation Process to execute Multi Wave
Campaigns with Campaign Elements.When i use the "Start Process" button
in the Campaign Automation Graphical Modeler to execute the Campaign, it
works fine for the first time.However if i again re-execute the Campaign
Process using "Start Process" button in the Campaign Automation Applet
modeler,re-execution fails and it says that the "Execution of Campaign XXXXXXX has already
started" and "Campaign was not started".Please note that i have re-triggered the execution process only after the First execution has been successfully done.
Is it not possible to re-execute the Campaign once it has been already
executed using Campaign Automation Process?May be i have missed some customizing steps.
We are using SAP CRM 7.0.Any help will be appreciated.
Thanks,
Abhishek

Hi, Abhishek!
Have you found the solution how to restart/re-execute the campaign?
Appreciate any help with this subject!

CRM_ICWC_TEST parameter not working in CRM 2007

Hi,
In previous CRM versions, we have been able to get the view name to show up in the mouse hover text by adding the CRM_ICWC_TEST parameter with a value of 0X23456789 to our users. In CRM 2007, I am not able to get this to work. Has anyone else been able to?
As always, I promise to reward all useful answers.
Thank you,
John

Hi John,
In CRM 2007, it will be more easier than CRM_ICWC_TEST parameter.
If there is an TEXT box or table grid, you may put cursor in the TEXT box, or select the row of the grid, and press F2, then you will have a popup with all info you needed, more than the view info itself.
For example, in IC Webclient, Service Orders, Overview,
If you put cursor in Description text box, press F2, you will find
Component = ICCMP_BTSHEAD
View = BTSHeader
Something like this.
Then you will be able to display the configuration in
transaction bsp_wd_cmpwb, by enter component, and Display button.
Then expand the view folder, and find the BTSHeader.
CRM 2007 has quite different structure. Thus we might have to do things bit differently.
Hongyan

Business role customizing not working in crm 2007 web client

Can someone tell me what services need to be activated via sicf for business role customizing to work in the Web Client under the Administration component in CRM 2007. I have everything else working in this are eg surveys, document template, fact sheet configuration, view configuration but the business role customizing when selected just opens a blank screen
Thanks in advance
Eddie

Hi Eddie,
The SAP CRM 2007 Master guide suggests enabling all the SICF services in the SAP namespace.
We had some script errors in CRM UI, but once all the SICF services were activated, they simply disappeared.
The IDES demo systems are also set up this way, so you can try doing it.
Regards,
Padma

Middleware - Delta load is not working from CRM to R/3

Hi Experts,
Our client is using SAP-R/3 4.7 and CRM 5.0
Connectivity was established via Middleware and initial load of Customizing objects and Master data( Customer and Material) was finished successfully.
Now if i create any Customer or Product in R/3 they were replicating to CRM(Delta load), but this delta load is not working in CRM to R/3 direction.
In CRM Administration console( Transaction code - SMOEAC) R/3 site was maintained and subscribed for Publications - All Business Partners, All Business Transactions and All Business partner Relationships.
Can anybody help me out that why Delta load is not happening from CRM to R/3 Direction.
Thanks in advance
Nadh.

Hi Nadh,
for BPs check PIDE settings once agiain, i hope u ve already downloaded all mandatory obects for BP, because u already told that replication from r/3 to crm is ok, so check once again PIDE settings (CRM to R/3),
for Products u ve to manual upload only
for Products
This may be necessary because the data is required in the OLTP System for a number of logistical processes such as procurement, inventory management, billing, financial accounting, controlling.
cheers
Ranga

F2 help not working in CRM Web UI 2007

Hi Expert,
We found that Technical Information (F2 Key) is not working in our systems, popup is getting opened with blank screen and session is hanging, please suggest .
thanks
Venkata

Hi,
Make sure you are using supported browser and version. Sometimes the add-ons cause problems, try disabling them.
Regards
Prasenjit

Campaign hyperlinks not working

Good Afternoon,
We are currently installing WEB CRM 6 and are experiencing a problem that was first added to the forum several months ago (see below). Does anybody know if this continues to be a known problem? We have been unable to create any valid links thus far. Sending individual e-mails from a campaign does however create the links correctly.
"When sending an email campaign that has hyperlinks to websites in the layout of the campaign, the link starts with /common/controls/link.ashx?subscriberid=32&campaignid=24&link=http: when it is received. As a result, the links do not work. Can anybody help please?"
Fraustrated.

I just worked this issue out with a customer. We put the domain name with the http:// in the Admin->Setup->Config Settings->Messaging->Web Site field. (http://www.YOURDOMAIN.com) We also had to restart the Web Tools Messaging Service for this change to take affect.
Note: If you leave the http:// off, your links may not work in Outlook 2003 and older email clients. Won't work on yahoo mail either.

Why ribbon XML does not work in Excel 2007?

I installed 4 VSTO Excel add-ins on an Excel 2007 PC today. The two that use a visual designer ribbon worked fine. But the 2 that use a Ribbon (XML) did not. The add-in starts ok. But the ribbon does not show. Why would that be?
I wrote two more add-ins to demonstrate the problem. One puts an OK button on the ribbon using the visual designer. That add-in installs on the excel 2007 PC and works as it should. But the 2nd, an add-in that uses Ribbon (XML) to put a button on the
ribbon, does not work. The add-in does not display on the ribbon.
Here is the code of the Ribbon (XML) add-in project. How to get a ribbon (XML) ribbon to display in excel 2007?
thanks,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Xml.Linq;
using Excel = Microsoft.Office.Interop.Excel;
using Office = Microsoft.Office.Core;
using Microsoft.Office.Tools.Excel;
namespace ExcelAddIn4
public partial class ThisAddIn
private void ThisAddIn_Startup(object sender, System.EventArgs e)
private void ThisAddIn_Shutdown(object sender, System.EventArgs e)
protected override Office.IRibbonExtensibility CreateRibbonExtensibilityObject()
return new Ribbon1();
#region VSTO generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InternalStartup()
this.Startup += new System.EventHandler(ThisAddIn_Startup);
this.Shutdown += new System.EventHandler(ThisAddIn_Shutdown);
#endregion
<?xml version="1.0" encoding="UTF-8"?>
<customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
<ribbon>
<tabs>
<tab idMso="TabAddIns">
<group id="ContentGroup" label="Content">
<button id="Button1" label="ok" screentip="Text"
onAction="Button_OnAction" supertip="Inserts text at the cursor location"/>
</group>
</tab>
</tabs>
</ribbon>
</customUI>
using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Reflection;
using System.Runtime.InteropServices;
using System.Text;
using System.Windows.Forms;
using Office = Microsoft.Office.Core;
// TODO: Follow these steps to enable the Ribbon (XML) item:
// 1: Copy the following code block into the ThisAddin, ThisWorkbook, or ThisDocument class.
// protected override Microsoft.Office.Core.IRibbonExtensibility CreateRibbonExtensibilityObject()
// return new Ribbon1();
// 2. Create callback methods in the "Ribbon Callbacks" region of this class to handle user
// actions, such as clicking a button. Note: if you have exported this Ribbon from the Ribbon designer,
// move your code from the event handlers to the callback methods and modify the code to work with the
// Ribbon extensibility (RibbonX) programming model.
// 3. Assign attributes to the control tags in the Ribbon XML file to identify the appropriate callback methods in your code.
// For more information, see the Ribbon XML documentation in the Visual Studio Tools for Office Help.
namespace ExcelAddIn4
[ComVisible(true)]
public class Ribbon1 : Office.IRibbonExtensibility
private Office.IRibbonUI ribbon;
public Ribbon1()
public void Button_OnAction(Office.IRibbonControl control)
MessageBox.Show("Button_OnAction");
#region IRibbonExtensibility Members
public string GetCustomUI(string ribbonID)
return GetResourceText("ExcelAddIn4.Ribbon1.xml");
#endregion
#region Ribbon Callbacks
//Create callback methods here. For more information about adding callback methods, visit http://go.microsoft.com/fwlink/?LinkID=271226
public void Ribbon_Load(Office.IRibbonUI ribbonUI)
this.ribbon = ribbonUI;
#endregion
#region Helpers
private static string GetResourceText(string resourceName)
Assembly asm = Assembly.GetExecutingAssembly();
string[] resourceNames = asm.GetManifestResourceNames();
for (int i = 0; i < resourceNames.Length; ++i)
if (string.Compare(resourceName, resourceNames[i], StringComparison.OrdinalIgnoreCase) == 0)
using (StreamReader resourceReader = new StreamReader(asm.GetManifestResourceStream(resourceNames[i])))
if (resourceReader != null)
return resourceReader.ReadToEnd();
return null;
#endregion

Hello Steve,
Most probably you have got an error in the ribbon XML markup. See
How to: Show Add-in User Interface Errors for more information.
I have noticed the following xml namespace:
<customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
Use the following one instead:
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui"
Also make sure that specified idMso values exist in Office 2007.
You can read more about the Fluent UI (aka Ribbon UI) in the following series of articles in MSDN:
1.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
2.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
3.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

Planning layout is not working in CRM

Hi Guru's,
I have created one planning profile under one planning layout in BW. Then I had configured this pallning profile in CRM-TPM. When I m going to creat Trade Pramotion. The planning layout is not work.
After puting a Planning Profile Grp. "Volume/Trade Spend" new tab will be appeared Its shows following error
Error in planning Services
Error Message count : 0001
Attribute 0BPARTNER has not value
It means 0BPARTNER infoobject have novalues. then I had entered Customer Master data in CRM with the help of CRM consultant, Then I have pulled the same data in BW. But still I am facing this Error.
If you know about this error. Please guide me. I]ll reared to maximum points.
Regards
Manoj Kulkarni

Hi Ravi,
Hope you would have handled this issue.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications, yet to start the configuration of TPM in CRM.
Thanks.

Automator not working properly while setting comments and moving files to folders, how to proceed?

So, this is my workflow, i've converted it into a folder action and applied it to a folder called "Automator" in my desktop:
i've turned "show this action when the workflow runs" so I can see what is going wrong
here's what I get (each action happens to have a problem to it)
1) Get specified finder items
2/3) Filter / find finder items
those are there just to work for this simple porpouse: identify that i've dropped a pdf file in the "Automator" folder
I move the PDF
The workflows starts
4) Ask for a text
this would be a prompt for me to add a comment to go to the "Spotlight Comment" section when I click on "get info"
put instead I get this...
that's the directiory that the file is in!
so I type some random text that would go to the spotlight comment section
then click OK
5) Set Spotlight Comments for Finder Items
that's the actual action, it should have the text that i've inputted in the last step, but instead it has this:
(Text is the variable that i've setted up to be shown on the ask for text and set spotlight comment...)
so, I have to manually input the comments I want to be on the file
and click continue
6) Label Finder Items
That's the action where i'm suppose to choose the label color, so I do that and click continue
this should work, but the file doesn't change label at all
nothing happens.
7) Move Finder Items
It should move to the "untitled folder", but again, it doesn't.
and that's it.
It's a PDF file, but it's not recognized by the system as a PDF.
When it is recognized, if I move more than one PDF file, the workflow works for just one PDF, instead of working for all of them!
I would reeeeally appreciate any help
the whole point in this was for me not to buy Hazel, but I think I will end up buying it :/
thanks for any help anyone can give me!

hey red_menace, thanks veeeery much for your support, I really appreciate it
as you can notice, i'm new to the automator, i'm actually new to the whole software thing, I have no idea what I'm doing so I really appreciated your help, changed my life and made my day
BUT, it didn't work...
well, it did, partially
I still don't get any comments on the "Spotlight comments" area and when I convert the workflow to a folder action, it does not recognize the file!
here's my workflow:
here's what I did, step by step:
first I added find finder's items, that worked really well, but it labeled all the finders files that were in the folder AND subfolders (the ones that were suppose to already be labeled right)
then I removed the find finder's items and tried, worked well, but I hadn't checked the "ignore the input", so the comments weren't working
so then I ignored the input on the actions that didn't require an iput, so my workflow is the same as yours now… and It's not working.
at first it worked for only 1 pdf, but no comments
then it worked for 50% of the pdfs, with comments
then it stopped working at all.
added the find finders items
worked while testing with one
saved
tried with 7 at the same time
worked… but didn't get any spotlight comments
went back on automator
checked "show this action when the workflow runs" for the spotlight comments action
added the variable as an answer on the "ask for text"
the variable ran as expected, I had the same input I've inputed as an answer for the "ask for text" on the "spotlight comments" action, label went okay and stuff, but i did not get any spotlight comment on the spotlight comment section!!
went back on automator and checked out the "append to existing comments" on "set spotlight comments for finder items"
and still didn't get any comments on the files!
btw, I went back on the automator and removed the find finder items
then tried again with only one file, dropping it in the application. it worked, but I still didn't get any spotlight comments!!
I also tried deleting the ask for text and tried just
but it did not work
I also converted the workflow that working for all expect the comments to a folder action, and it DID NOT recognize the pdf I dropped in the folder, what do I do?!

CAD not working on CRM 4.0

Hi Guys
We are working on CRM 4.0 webclient. Our SAP CRM is integrated with third party CTI vendor i.e Interactive Intelligence. All the integration is done and we are able to make inbound and outbound calls.
When any inbound call is received, even though the telephone number is maintained on the Business Partner, the identification of business partner is failing and we get a message called 'No Account information found'.
We did the below config on Account Identification Profile in SPRO.
CAD Application ID - CRM_IC (Our CTI vendor confirmed that it doesn't matter whatever is mentioned in this field)
XSLT File - CRM_IC_BPIDENT_EXT_IAD_TO_ABAP.
Are we doing anything wrong? Your help would be highly appreciated.
Thanks
Hari

Hi Guys
Just an update. We are not using CAD anymore. We are using the standard ANI functionality.
But this is also not working. I debugged it. Below are my findings. A standard function module is being called up i.e. TREX_BUPA_SEARCH. To this function module, the parameters Telephone Number(IV_TELEPHONE) and Country (IV_COUNTRY_FOR_TEL) are being passed. There is nothing wrong with the parameter for Telephone Number. But for the parameter Country, a value 'X' is being passed. So the function module is returning no business partners.
Is there anything that I need set on config?
Your help will be highly appreciated.
Thanks
Hari

Search criteria drop down not working in CRM 7.0 Web UI for few users.

Hi Gurus,
i have come across problem in sap CRM 7.0 web ui,
it goes here....
when a user opens a webui page and goes to "account management" work center page under "search" work center link group... he selects "accounts"(or contacts or account plan)... there in search criteria fields..(account id,role,country etc ) drop down list is not working for him...he can only see only which is maintained as default but if wants to change it by drop down list selection it is not possible...for me it is working ..can u please suggest what is missing in his case..?
if it is authorization issue please tell which object should i check..?
Thanks,
gaurav

Hi,
Please check if the user is assigned to a Business Partner.If not then assign the User to a Business Partner and check.
Regards.
Deepak Ramchandran.

Volume Automation Not Working In Logic

So, I have been doing some audio work with about 12 different tracks or so and at certain points, I need to use automation to completely lower the volume at certain points to infinity. Yet whenever I listen to the track, on some tracks, the volume automation will either ignore those points when it's supposed to go down to -infinity, and stay at 0 dB. Or conversely, sometimes it will go down to -infinity and stay at that point when it's supposed to go back up to 0 dB.
Does anyone know what's causing this or what could stop it? I'm using Logic Pro 8. Thanks!

I'm having the same problem. (Sorta) Automation was working and now it's not. READ is on.

Reg:Function module SAPWL_GET_SUMMARY_STATISTIC not working in CRM ABAP 6.0

Hi All,
When i execute the function module SAPWL_GET_SUMMARY_STATISTIC in CRM ABAP 6.0 passing the values below,
PERIODTYPE
HOSTID
STARTDATE
it's not showing any values in the summary.
it's showing the exporting parameters as,
RFC_ERROR_TYPE                  L
SUMMARY_AVAILABLE               N
HITLISTS_N_PROFILES_AVAILABLE   A
if this function module will not work means kindly provide me the solution for calculating
Average Response Time as in tcode st03 - Instance - total - Workload Overview.
Average CPU Time and some more fileds.
Regards,
Suresh

Hi
I used the FM mentioned and found the details as below:
VKORG
TABNAME                        TVKO
FIELDNAME                      VKORG
LANGU                          EN
POSITION                       0001
OFFSET                         000006
DOMNAME                     VKORG
ROLLNAME                    VKORG
CHECKTABLE
VTEXT
TABNAME                        TVKOT
FIELDNAME                      VTEXT
LANGU                          EN
POSITION                       0002
OFFSET                         000014
DOMNAME                        TEXT20
ROLLNAME                       VTXTK
CHECKTABLE
LENG                           000020
Shiva

BI 7.0 Bex Analyzer not working with excel 2007

Hi All,
I have installed the BEX 7.0 with MS office 2007 but the Analyzer is not working. The open file symbol does not give any option on the click.
Please help.
Regards,
Abhishek

Hi Abhishek,
This is a BEX Add-in problem.
Follow the below step....
1. Copy the Tool
2. Change the Tool.xls into the Tool.xla
3. Copy the Tool.xla file
4. Open My Computer window
5. Navigate to the following folder
a. C:\Program Files\Common Files\SAP Shared\BW
b. Paste Tool.xla file into this folder
6. Open Bex Analyzer
7. Open a Query or Workbook
8. Click on the u201CToolsu201D Menu on the Top
9. Select u201CAdd-Insu201D from the Tools menu
10. Click Browse from the Add-Ins window that opens
11. Browse to the file you just saved
a. C:\Program Files\Common Files\SAP Shared\BW\ Tool.xla
b. Click Ok to continue
12.The Tool for Excel should not be checked in the Add In window
13.Click Ok to continue
14. Close
15. Re Open Bex Analyzer
16. The Tool command should be displayed at the top of the Tool Bar
17. Close Bex Analyzer
18. Open Excel
19. The Tool command should be displayed as well at the top of the Tool Bar.
Hope this helps...
check the below link
http://www.sytecpa.org/software/BWInstructions/Installing%20the%20SAP%20BEx%20Analyzer%20Excel%20Add-In.pdf
Regards
KP

Campaign Automation not working in CRM 2007

Similar Messages

Maybe you are looking for