Campus Manager No Data Collected from Network

Just intergraged CiscoWorks with ACS.  Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
No Data Collected from Network
1.Devices are not availiable from DCR or
2.You have not performed data collection at least once
When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
We could see devices fine before the ACS intergration but now, we cannot see any devices.
Any thoughts?

The devices (original clients) that I defined are as follows:
10.0.1.*
10.0.10.*
10.0.2.*
I was able to see these clients.  Deleted the above clients from ACS and added:
10.0.1-10.*
So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
I can still see the original clients only.  The others show up in Devices not configured in ACS report.
What do I need to do?  What did I miss?

Similar Messages

  • Managing my photo collection from an iPad

    I would like to manage my photo collection from an iPad. It sounds simple enough, but I keep hitting barriers every way I turn.
    Here's the setup: I have about 150Gb of photos, so far too much to put on an iPad. Those are stored on a PC and available via Windows File Sharing.
    The vision is for me to sit on the couch, flipping through photos, moving some to folders, deleting others as I go.
    It sounds like a simple file management app will do the trick, but none I have tried are up to the task (and I have wasted money buying a number of them, why can't iOS do trial apps like Android?). They either do not support Windows File Share, or do not show a thumbnail of the pictures (I cannot open each photo to find out what in it).
    I did try to sync a sub-set of photos to the iPad, but folders and changes I make do not get synced back to the PC. It might be called sync, but it is actually just a one way copy.
    As well as moving photos around in the file structure I also want to do simply editing. Like rotating, cropping, that sort of thing. It seems the apps that do file management don't do editing and visa versa.
    Things like photobooth will let me edit a photo, but it drops the result back into the photo stream instead of where it came from on the Windows machine. I can get the photo stream back to the PC, but it’s a pain as I then have to work out which directory to put it back into.
    I find it incredible that tasks that are so simply on a laptop are so difficult on the iPad. The iPad seems ideal for this use.
    Is there are app that will do this?

    Photos that were originally synced from a computer can be copied off via third-party iPad apps such as Simple Transfer (which has a free lite version called Simple Photo & Video Transfer which you can try first), which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on the computer.
    Have you not got a backups of the originals on external drives ?

  • How to store the data coming from network analyser into a text or excel file

    Hii everyone
    I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
    Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
    Attached is the vi for kind consideration...
    Looking for help
    Regards
    Rohit
    Attachments:
    Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

    First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
    The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
    The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Microsoft Azure for machine learning on data collected from microsoft spectrum observatory

    Dear Sir,
    Can any one please suggest how shall I apply Microsoft Azure for applying machine learning techniques on spectrum data available from Microsoft spectrum observatory . Please send a mail.
    Regards,
    pavan

    Hi Pavan!
    Apologies, I'm not familiar with MSO - how are you collecting the data provided there? Is there an API? Do you have access to the raw data?
    Regards,
    AK

  • Peformance data collection from SUN ZFS storage

    Hi,
    We will be doing a performance load tests on couple of ZFS 7420 soon. what all the performance data needs collected and how?
    I am pretty new with this(SUN) line of products and tools. what will you do in those scenario as performance experts?

    1) It would certainly be faster as it does not have large ethernet/tcpip overheads.
    2) LUNs can be created on the same pool as your existing NAS shares.
    3) You can test out with iSCSI, but performance wise it would be very close to your existing NAS. You might want to try to LACP a couple of network ports dedicated to iSCSI.

  • Can we create a pdf using data collected from a forms central form?

    I have a form in Forms Central that is collecting data and I want to take the data and merge the fields into a pdf document with merge fields. Then send the completed merged pdf to someone else automatically?

    Hi,
    Kindly post your query in FormsCentral forums:https://forums.adobe.com/community/formscentral
    Regards,
    Florence

  • Data collection from 3 different hardwares

    Hello Friends,
    Actually I want such vi in which = when program starts execution it should record raw data available on GPIB port and then send a command on TCP/IP (i.e., Ethernet card) to move the stage. After movement of stage, it should again get the data from GPIB.
    Now here what actually I want is, How I should write program in which this is satisfied.
    Here I'll require
    Write data to spreadsheet,
    wait for some execution to be done
    Read data from spreadsheet,
    Save both data available before and after movement of stage,
    and accordingly It should plot the graph of both datas.
    Thank you.
    Tanmaya

    Sounds like a case for a state machine architecture.
    http://zone.ni.com/devzone/conceptd.nsf/webmain/c74cec177a289dbd86256c4e00600196
    http://sine.ni.com/apps/utf8/niepd_web_display.display_epd4?p_guid=B45EACE3E1E956A4E034080020E74861

  • LiveCycle: Online data collection from PDF to RSS feed

    Is there any resource anywhere that anyone could possibly point me to that will help me understand how to extract data from a on-line PDF form (posted at our web site) and push that data to our RSS feed?
    I have been searching for anything along this line for most of the day and am not able find anything even remotely similar.
    All help is very much...did I say Very Much?...appreciated...
    Thanks...

    Is the form being returned as a pdf or xml?  You can distribute the form, which will set up a pdf portfolio for your returned forms.  When forms are returned via email, you double click on the attachment and it puts into the portfolio.  From the portfolio you can export one or more forms (data) into an excel file.
    To export the whole form, click on File, Export and choose the file type you want.  However, if you just want the form data, I would suggest you distribute the form to create the pdf portfolio for that.

  • GAIN PHASE Data collection from HP4194 using a GPIB card?

    I'm trying to collect gain and phase data on a HP4194 using a GPIB card. I'd like to collect this data and run it to an MS Excel spreadsheet. Does any one have any VI's that do this??? So far, I haven't been able to find any commands that read each of the 401 elements to labview.
    HERE'S AN EXAMPLE OF DATA I WANT TO READ:
    http://www.tec.ufl.edu/~shailu/labview/4194a/4-pt/505/II/archive/pxfn1.txt
    Please email me at [email protected], if you have a solution. Thanks.

    That sounds like a bit of LabVIEW coding. Here's some resource that will help:
    -The instrument driver for this device is available at ni.com/idnet.
    -LabVIEW has a WriteToSpreadSheet.vi on the File I/O function pallete.
    -The Programmer's Reference for the 4194 gives the strings to send of the GPIB bus.
    Randy Solomonson
    Application Engineer
    National Instruments

  • Can I load data collected from one form, into a new form?

    I have created an Employment Application which collects pre-employment data for our prospective employees. I would like to be able to load that data into an Employee Packet once the decision is made to hire the prospect. Is that possible?

    Are you using a PDF form, and if so, do you have Acrobat?

  • How do I create a form using data collected from a previously completed form?

    I need my users to fill in an initial registration form with a range of details. Six months or so later I need to ask the users to confirm the details and also fill in new information. Is there a way I can have the second form be automatically populated with the initial form information so they only have to fill in the new information. I need all the information to be stored in the one database.  Thanks

    Sorry we do not support this workflow.
    Gen

  • I would like to learn how to search in database (data collected from users)

    Where can I find learning material ?
    Are there any code examples?

    As I do not know your skill level I will start with - http://www.adobe.com/devnet/dreamweaver/application_development.html#php
    for general info.
    More advanced - http://www.devshed.com/c/a/MySQL/Building-a-Search-Engine-with-MySQL-and-PHP-5/2/
    PZ

  • LMS 3.2 CM, data collection stays running forever

    Hi There
    I have a customer who has LMS 3.2 Solaris. His CM, data collection, is in a running state for more than two days.
    I am almost sure this is a bug, do you have any advice for me please.

    see this thread:
    https://supportforums.cisco.com/message/1322774#1322774
    perhaps you are hitting BugId CSCtd49439
    CSCtd49439            Bug Details
    Data Collection never completes, and UT acquisition  cannot run
    Symptom:
    Campus Manager Data Collection does  not stop.  It is reported as always
    running in
    Topology  Services.  Additionally, User Tracking acquisition does not run due
    to  XML files
    being written.
    Conditions:
    This will occur if there are any standalone Access Points being  managed by
    Campus
    Manager.  Other devices can also cause this  (e.g. old 1200 series switches).
    Workaround:
    Filter out standalone Access Points and other affected devices from  Campus
    Data Collection
    under Campus Manager > Administration  > Data Collection > Exclude Devices.
    A patch is available  by contacting TAC.

  • Campus manager 5.0.6 bug

    Hello,
    I'm hitting bug CSCtd49439 detailed below after i upgraded my campus manager to 5.0.6. the workaround didn't work in my case and i need the patch without opening a tac case, where can I find it???
    Regards
    Data Collection never completes, and UT acquisition  cannot run
    Symptom:
    Campus Manager Data Collection does  not stop. It is reported as always
    running in
    Topology Services.  Additionally, User Tracking acquisition does not run due
    to XML files 
    being written.
    Conditions:
    This will occur if  there are any standalone Access Points being managed by
    Campus
    Manager.  Other devices can also cause this (e.g. old 1200 series  switches).
    Workaround:
    Filter out standalone Access Points  and other affected devices from Campus
    Data Collection
    under Campus  Manager > Administration > Data Collection > Exclude Devices.
    A  patch is available by contacting TAC.

    "I understand I have to open a tac case to get it but the problem is that; being Cisco Gold Partners, my company has a limit on the numbers of tac cases to be opened and there are lots of patches and software that is only available through tac? can I unsertand why? IS this a Cisco Policy?"
    Yes, it is and this is an old discussion with Cisco and I stopped it sometimes in the past; The only argument for you might be - "it is the same for all Cisco partners...."
    It has some aspects, I am not sure if Cisco is aware about..
    See this situation:
    If you have an issue discussing it here on the forum e.g. with jclarke and it reveals to be a LMS bug and jclarke writes a patch for it, it is clear to open a TAC Service Request to get the patch (the patch is not tested yet and TAC needs to have the possibility to keep at least a statistical logging about the issues).
    But know the ridiculous part starts - the case will get accounted against your account because the bug ID yet exists. edit: Only  Bug IDs generated during the follow-up of a case won't get accounted. Only if a NEW Bug ID is generated during the follow-up of a Service Request will result in the fact that the SR is not accounted. So beside the fact that you have to deal with parts of LMS which are not working you receicve a kind of penaltiy for helping in making LMS functioning correct....
    Once, I stopped informing Cisco about the issues I have found within LMS because of this penalty, but when jclarke started in this forum it was worth again announcing them and discussing those things...- because there is real help and a prospective solution
    But I think it is somewhat embarrasing for Cisco to put an imposition on people/companies who found bugs instead of giving somekind of reward or only a short  "Thank you...."
    Nachricht geändert durch mermel

  • FWSM missing under Campus Manager Device Management

    Hello everyone,
    We are running LMS 3.2 with CM, CS, RME, etc. patched to the latest release.
    Under Campus Manager -> Admin -> Data Collection -> Device Management -> Include Devices, all available devices have been added. However, our Firewall Service Module (and some other ones) are missing from the list of included devices.
    The FWSM is listed under DCR and RME though. It passes and runs inventory collections and SNMP credential checks. The FWSM is running code version 4.1(1).
    Is this normal behavior or should it be possible to add it to the list in CM?
    Thank you.

    Yes, this is expected.  Campus Manager does not support firewall devices like the FWSM, PIX, and ASA as they do not support CDP.

Maybe you are looking for