Campus Manager states devices "not managed"

Hi, I have the following ciscoworks installation:
LMS 3.1.1 and Campus Manager 5.0.5
I have disabled auto mode and manually included my devices which are all in the DCR, i've also checked all the device snmp credentials. After performing a data collection most devices still show up as not managed. Of several 6500's and 7200's only 1 is showing as managed. What can I do to fix this? thx
P.S the abovementioned devices are in my include list. They are not in the exclude list

It could be that Data Collection is not completing properly. Post the ani.log after running a Data Collection.

Similar Messages

Campus Manager Device Not managed

Dear *,
I have LMS 3.2 and on my campus manager device is showing not managed. I excluded the devices and included is again and and did data collection and still the same. I even deleted it from Common Services, re-discovered it and included in CM but still the same. Any help please. This device was fine before.
Thanks
Aamir

1. Post screen shot of error.
2. What kind of device is it?
3. Is this LMS installation being managed locally or by ACS?

MSI P4M900M2 - MSG : MPU-401 Compatible MIDI Device not manage Install

Hi,
I just Re-install my PC to Windows XP and all the drivers had installed. Only have problem with this : MPU-401 Compatible MIDI Device unable to install. Any one had come across this issue, please kindly advise.
Thank you very much.
Desmond

Do you got sound at all?
Does the Audio Controller is enabled in BIOS?

Nomad Jukebox Zen Xtra - cannot install firmware - PC states device "not connected&qu

Hi everyone,?Below is a message I've just sent to Customer Support, but I thought I'd also post it here in case anyone has any words of wisdom. Thanks in advance for your help. -- - Dear Madam or Sir,?Yesterday, I tried to connect my Zen Xtra to my PC to transfer some songs from Windows Media Player . WMP produced an error message stating that my PC had a driver for my Zen Xtra which is not supported by WMP. [This was the first time I had tried to Sync my Zen Xtra with WMP.]?I visited www.creative.com and tried to install the latest firmware for my Zen Xtra. The installation of the firmware froze and remained frozen for over an hour. Now the only thing that my Zen Xtra displays is Rescue Mode v.3. I cannot install any firmware at the moment, because the installation wizard keeps stating that my Zen Xtra is not connected to my PC. However, it IS connected and Windows XP detects it up as a "portable storage device." I have completely uninstalled all Creative products on my PC and reinstalled them using my original installation CD, but this has not helped matters. I cannot find any helpful articles in your Knowledge Base. I would be very grateful if you could provide some assistance in this matter. I have had several years of excellent usage from my Zen Xtra and I am extremely annoyed by this latest development. Not only did the firmware upgrade process require me to delete all the data on my Zen Xtra, but now I seem to have a device which is not functioning at all. Many thanks.

I am having the same problem. Seems like to me creative and many of these other companies leave it for people like ya'll to figure out what is wrong with their OWN product LOL? I am having the same exact problem with my 30gb. Guess I will try what you guys and gals said to do and if no luck then would someone please let me know when there is a class action:smileyvery-happy:? I think it's about time companies became more responsible for their actions. Thank you all for figuring it out. I hope this works for mine. I think you all should send Creative a bill for figuring out their problem. I certainly will NEVER buy another Creative product again. i-Pod here i come

DCNM not managing all VDC's

New installation of Nexus gear as well as DCNM. Currently DCNM will manage the admin VDC on the 7718 but it will only show the other VDC's with the 'Device not managed' icon (red slash circle through the wrench). I'm using the same creds for each VDC and I am sure these creds can login to each VDC. I've been looking over the 'DCNM Fundamentals' document and I have read how to create a seed entry and discover devices but I do not see anything that talks about specifically managing each VDC. I've been clicking around all day and just don't know what I'm looking for.
Am I missing something simple? This seems way too hard.
--Brian

How to organize iMovie '08 folders etc.
From within iMovie '08 itself.
Do you keep all fresh raw footage in one folder? And all other whatevers in other folders? Or do you keep all of the folders relevant to one project in one folder?
Forget about folders. Use "Events" as bins (i.e. "folders" or "drawers") in which to store your clips and/or move them between if you must. Name and use them as you wish -- but use them rather and moving things as individual clips in physical folders at the "Finder" level outside of the iMovie '08 application -- i.e., let the application "manage" your files as it is supposed to do.

NSM 3.1.1, New users not managed.

When new users are added to a context with a User Home Folder policy the new users are unmanaged.
This is a new 3.1.1.15 install. If I right-click the user and select User Actions -> Manage it will create the storage and set the rights per the policy.
What am I missing?
Thanks,
David.

So it was a simple over-site ( read as a dumb mistake ) the Event Servers and Agent Servers on the Configure tab were not Authorized...
Thanks for your help,
David.
Originally Posted by dbenjamin
# ls /var/opt/novell/storagemanager/event/data/
.cacheindex
I then stop the engine.
Create a new user using iManager.
# ls /var/opt/novell/storagemanager/event/data/
.cacheindex event.dat
I start the engine.
Wait a little bit, a minute or less.
# ls /var/opt/novell/storagemanager/event/data/
.cacheindex
Log into Novell Storage Manager Admin 3.1.1.15
Select Storage Management
Select the container that has the new user
Click the check by Users to see the new user
Right click the user and select Object Properties
Properties tab:
-FDN CN=testuser,OU=Students,O=TreeName
-GUID {big long guid here}
-Type 1
-Create Time Friday, August 8, 2014 8:19:54 AM
Effective Policies tab:
-Effective Policy Students
-Policy Type User
-Managed Path Type Home Folder
-Managed Path <blank>
Associated Polices tab:
-Policy Students
-Policy Type User
-Managed Path Type Home Folder
Transactions tab:
-Eligible <blank>
-Deferred <blank>
-Active Error, Unable to service the request at this time.
History tab:
-FDN History, Name; Error Processing Results - 1792: The requested record could not be located in the Global Statistics Reporting database. Date / Time; Not available
I run the Consistency Check and the Management Status is Not Managed.

NetworkManager device not ready

NetworkManager starts fine, but it still doesn't work.
Apr 7 23:31:09 Nice NetworkManager: <WARN> nm_signal_handler(): Caught signal 15, shutting down normally.
Apr 7 23:31:09 Nice NetworkManager: <info> (wlan0): taking down device.
Apr 7 23:31:09 Nice NetworkManager: <info> (eth0): cleaning up...
Apr 7 23:31:09 Nice NetworkManager: <info> (eth0): taking down device.
Apr 7 23:31:09 Nice NetworkManager: <info> exiting (success)
Apr 7 23:31:10 Nice NetworkManager: <info> starting...
Apr 7 23:31:10 Nice NetworkManager: <info> Trying to start the modem-manager...
Apr 7 23:31:10 Nice NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Apr 7 23:31:10 Nice NetworkManager: <info> Found wlan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill0) (driver <unknown>)
Apr 7 23:31:10 Nice NetworkManager: <info> WiFi enabled by radio killswitch; enabled by state file
Apr 7 23:31:10 Nice NetworkManager: <info> WWAN enabled by radio killswitch; enabled by state file
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'ath9k')
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): now managed
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2)
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): bringing up device.
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): preparing device.
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): deactivating device (reason: 2).
Apr 7 23:31:10 Nice NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): carrier is OFF
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): new Ethernet device (driver: 'atl1c')
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/1
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): now managed
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2)
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): bringing up device.
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): preparing device.
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): deactivating device (reason: 2).
Apr 7 23:31:10 Nice NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.5/0000:03:00.0/net/eth0
Apr 7 23:31:10 Nice NetworkManager: <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Apr 7 23:31:10 Nice NetworkManager: <info> Trying to start the supplicant...
And when I try to connect with cnetworkmanager:
Apr 7 23:32:37 Nice NetworkManager: <WARN> connection_added_default_handler(): Connection (2) /MyConnection/1 failed to activate: (2) Device not managed by NetworkManager

I'm having kind of the same problem here. After a crash I had the other day, my networkmanager stopped working (don't ask me why!!).
So, I removed NM completely and installed it from scratch following step by step all the instructions in the NetworkManager wiki; but the only thing I get is an applett that insists in saying "network manager disabled" (no matter whether I remove the NetworkManager.state pid file), and a "deactivating device (reason: 2)" line right after a "bringing up device" line in the daemon.log.
Any suggestions? Is there a bug in NM? Or should I look for some corrupted file remaining in my system after that crash?
EDIT:
After one dozen tries and much fidgetting and modifying things, I've got it working, but I don't know which has been the decisive move. I think one of these two:
-either modifying in my BIOS the settings for the wireless killswitch,
-or uninstalling the kdemod-networkmanagement-networkmanager-plasmoid (that I had installed along with kdemod-networkmanagement-knetworkmanager-kde4)
Last edited by humilleitor (2010-05-03 15:11:09)

Device not recognized HTC One

Ever since the last Verizon update, neither of my computers recognize my phone. I have tried shutting off computers completely (internet advice) and my device drivers are current. Nothing works.

I downloaded the htc sync manager (although I don't know why, this phone used to connect to my computer without it) and the directions ask to send the software to my computer which I cannot do because the computer and phone no longer communicate. I have changed cables, that isn't the problem. All my cables did not suddenly go bad. When I attach the device I get an error sound and the device manager says "device not recognized error 43". This happens both on my laptop and on my desktop computers when they normally worked before. I have searched for an answer on the internet and while there is plenty of problems with this, there are no real answers. Some people suggest shutting off the computer entirely for a couple of minutes, which absolutely does not work.

LMS 3.2. Campus Manager (5.2.1) and some devices in "Not Managed" state

Hi:
I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 13 devices in Not Managed state, include C2950G and C2960S . But 3 sets of C2950G can be managed . What is this? How can I fix it?
I attach ani.log file
Thanks

Try to remove the Auto-sync mode and try to add those 13 devices manually and run Data Collection and check if they get added.
-Thanks
Vinod

TS1369 My computer (Win 7) recognises my ipod but when Itunes is automatically started the ipod is removed from "my Computer" and is not recognised in itunes, my device manager states he device is being "uninstalled by window" error 21, what is happpening

My computer (Win 7) recognises my ipod but when Itunes is automatically started the ipod is removed from "my Computer" and is not recognised in itunes, my device manager states he device is being "uninstalled by window" error 21, what is happpening.

Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Devices showing not managed by Campus Manager

Hi,
We are using Campus Manager 5.2 with LMS 3.2. We have 100 devices and all 100 devices has been successfully discovered in Common services in all 100 devices are showing in DCR.
When we check in RME we have found all 100 devices over there.
But, in Campus Manager we got only 95 devices. out of 88 WS-C2960G-24TC-L 5 switches are not showing in Campus manager. we have added the same manully ( manually included & Ecluded all 5 devices in Campus manager) and start the data collection, but no result.
After data collection it is showing not managed by Campus Manager when we check ( Show all Included devices option).
Kindly help us to rectify the issue.

Another suggestion is to upgrade to Campus 5.2.1. There were bugs with 5.2 where Data Collection did not complete successfully. After upgrade, reinitialize the ANI database with the command:
NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

Cisco PI 2.0 putting devices in not managed state

Hi all,
Have you find the way in Cisco PI 2.0 how to put device in not managed state? For example, for some devices I need to be in not managed (not polled) state for certain time?
Thank you!
Ivana

Hi Ivana,
I checked and I did not find any way to suspend or unmanage the managed devices
I don't think , we have that feature in PI yet.
Thanks-
Afroz
[Do rate the useful post]

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability.

[SOLVED] Network Manager - Device not ready

Hey,
I can't use the wlan feature of networkmanager because its grayed out with "device not ready" written on it.
My wlan device is definitely enabled.
iwconfig:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
I use the
Intel Corporation WiFi Link 5100
thx 4 help
Last edited by GNA (2011-04-13 09:13:25)

ls -l /var/run/daemons:
total 0
-rw-r--r-- 1 root root 0 Apr 5 09:27 acpid
-rw-r--r-- 1 root root 0 Apr 5 09:27 crond
-rw-r--r-- 1 root root 0 Apr 5 09:27 dbus
-rw-r--r-- 1 root root 0 Apr 5 09:27 laptop-mode
-rw-r--r-- 1 root root 0 Apr 5 09:27 netfs
-rw-r--r-- 1 root root 0 Apr 5 09:27 networkmanager
-rw-r--r-- 1 root root 0 Apr 5 09:27 syslog-ng
groups:
lp wheel rfkill games network video audio optical storage scanner power
users networkmanager
I was originally not in the network and networkmanager group but tried adding myself in the course of reading your post, because I thought maybe that could be the reason, but it didn't change anything
I had to create the networkmanager group because it was not existent but https://wiki.archlinux.org/index.php/Groups#Groups says this group should exist.
Last edited by GNA (2011-04-05 14:00:08)

How do I manage local device storage in Settings? I get a message that I do not have enough local storage when attempting to update Apps, and need to manage local storage.

How do I manage local device storage in settings? I know how to get into Settings, of course, but not how to proceed beyond that. Thanks.

Go to Settings>General>Usage>Storage and check to see how much storage you have used.
If you are deleting apps and other content, something about that message doesn't seem right to me. What are you trying to do when you get this message? Take photos? Shoot a video?
Try quitting the camera app completely and restart the iPad. See if the message goes away.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Campus Manager states devices "not managed"

Similar Messages

Maybe you are looking for