Campus manager topology services error
I have LMS installed at a customer site and it was working fine but lately when i was preparing a session for the customer i tried to open the topology services under campus manager but i received the following error " unable to launch the application "
What is the jre version you are using to launch topology services? What workstation are you using? Do you get the same behavior from the server? Post a screenshot of the error.
Similar Messages
-
Campus Manager Topology Services
Hi,
How to configure the refresh rate for the Layer 2 View under Topology Services,submenu of Campus Manager, in LMS 2.1
By the default the refresh rate is 5 minuets, is there anyway to configure it?
ThanksWhat is the jre version you are using to launch topology services? What workstation are you using? Do you get the same behavior from the server? Post a screenshot of the error.
-
LMS 3.2 Campus Manager Topology Issue with C450X-E
We replaced catalysts catOS 6509 by c4503-E and C4506-E in the network.
Since that replacement, 2 links gigaethernet bundled in an etherchannel disappeared from Campus Manager Topology maps (vtp and layer maps).
These links were drawn with 6509 in the old maps but not now with 450X-E.
We have also 235 other switches without any problems.
The links are up and each switch is seeing its neighbour by cdp on each link. No discrepancies found for these links.
I have done a reinit of ANI database by reinitdb.pl -restore and restart a complete discovery and data collection.
The issue is the same.
Campus Manager Version is 5.2.1 with CSCtd49439 installed
CMDeviceUpdate Version is 13.0
C450X-E IOS version is 12.2(53)SG2
In the file "campus\etc\cwsi\portsData.xml" the links do not appear that means they are not discovered.
In Device Center, each switch is seeing the other switch as a neighbour.
Do someone has any idea on that issue ?
Thanks.Hi,
I have the same problem.
I'm sorry but I'm not used to the TAC and I can't find where I can download the patch.
Can you tell me what is the procedure to get this patch ?
thank in advance
Nicolas -
Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2
Hi Friends,
While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
ThnxThe name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
Have you tried this
http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
regards
Nasir -
What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support -
Topology Services Applet error: "No JRE found in configuration file."
Is there an issue with IE7 and opening up Topology Services? Or can someone guide me in fixing this error message?
I'm using LMS 3.1 and had uninstalled all of my Java versions and installed jre-6u5-windows-i586-p_withjacorb.exe on my client. However, when I clicked the Topology Services link I would get the Java splash window for a bit and then nothing happened (the next two applet windows wouldn't load).
When I tried to launch Topology Services from another box using IE6, everything worked fine. I tried the same steps above on another box with IE 7 and that worked fine too.
So I tried a few installs and uninstalls of different Java versions and found that if the version was other than 6_5, I'd get the Java splash screen with the first applet window telling me I had the wrong version. When I'd uninstall all Java versions again, reboot, then install the correct Java version, I wouldn't get anything past the first Java splash screen. After a few attempts at this, I now receive the following error when I click on Topology Services, "Bad installation. No JRE found in configuration file."
How can I get to this configuration file on my client to let it know that I do indeed have the right version of Java on my box?
--JeffCampus 5.1 works just fine with IE 7.0 and JRE 1.6.0_5. It sounds like this particular client may be in bad shape. Typically, I recommend one uninstall all versions of Java from a client, reboot, then install the one version that comes with LMS. I also recommend that for IE, one adds the LMS server as a Trusted Site in IE. You might also try disabling anti-virus software temporarily to see if that helps.
For Campus 5.1, you will also need to open TCP ports 42342 and 43242 from client to server.
It may be that this client is in such bad shape that it will need to be rebuilt to get Java working correctly. -
Campus Manager Installation Error
Hi Everyone,
I have issues with my campus manager and it seems that some files has been corrupted, so I uninstall campus manager and re-install it. However, during the installation of campus manager 5.2 I am getting these error message (please see attachment). I already stop daemon manager and other services but I am still getting the same problem. Do you have any suggestion on how to resolve this problem.
Thanks.if you have let the installation pause in this state, do the following:
open the Task Manager from windows and go to the "Process" tab;
look for any sm_xxxx process (e.g. sm_server.exe, sm_authority) right-click on the process and kill it;
then go back to the installation screen and click on retry; the installation should proceed; -
Error campus managment 5.2.1 - LMS3.2 - Windows 2003
hi,
I update to campus managment to version 5.2.1, and after that restart server and services. in campus managment module I can´t see the "Recently Completed Jobs". The Best Practices and Deviation Discrepancies are in 0, but before upgrade it had not 0.
and when I press in Start Data Collection and Start UT Acquisition i see a popup that said: Error while loading. Campus Manager Server may be down. Please check for Campus Manager Server Status in Common Services -> Server -> Admin -> Processes. If the process is down, restart it. Else try after sometime.
but the services is running!!The Discrepancies and BPDs are stored in memory in Campus, and re-populated during each Data Collection. It sounds like ANIServer is having problems. Post the output of the pdshow command as well as the ANIServer.log and ani.log.
-
Network Topology in Campus Manager
I have two switches that are unsupported in my network topology map. These devices show up as green boxes with question marks. The switches are catalyst 3560's model number WS-C3560-48TS. I can see where the 24 port model is supported but not the 48 port. Is there a way to get support for these devices so that my topo map doesn't have green icons with question marks?
Which campus manager service pack do you have installed? This support was added in CM 3.0.4
-
Error 5 - An exception occurred in SMO while trying to manage a service
Hi
I use an instrument
made by myself in vb.net using SMO
objects to manage a mixed group of about
80 MS Sql Server (rel. 2005-2008 r2 & 2012)
With this tool I check the status of services,
change service accounts and their passwords,
etc.
A few days ago one server
started to return an error when I run
the first operation on any property of the object
ManagedComputer just created.
Error: "Error 5 - An exception occurred in SMO while trying to manage a service"
This is my code:
If UserID = "" Then
'//Use the credentials of current user
mc = New ManagedComputer(serverName)
Else
'// Use the credentials provided by interface
mc = New ManagedComputer(serverName, UserID, UserPsw)
End If
str = ""
For x = 0 To mc.Services.Count - 1
With mc.Services.Item(x)
servNome = .Parent.Name.ToUpper
srvNome = .Name
srvStato = .ServiceState.ToString
srvStartMode = .StartMode.ToString
srvAccount = .ServiceAccount
End If
End With
Next
The instruction mc.Services.Count generates the error below:
smoex = {"An exception occurred in SMO while trying to manage a service."}
Microsoft.SqlServer.Management.Smo.FailedOperationException = {"An exception occurred in SMO while trying to manage a service."}
_HResult = -2146233088
_message = "An exception occurred in SMO while trying to manage a service."
Data = {System.Collections.ListDictionaryInternal}
FailedObject = Nothing
HelpLink = "http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.2100.60+((SQL11_RTM).120210-1846+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.InnerWmiException&LinkId=20476"
HResult = -2146233088
InnerException = {"Failed to retrieve data for this request."}
IPForWatsonBuckets = 1670498764
IsTransient = False
Message = "An exception occurred in SMO while trying to manage a service."
Operation = ""
ProductName = "Microsoft SQL Server"
ProdVer = "11.0.2100.60 ((SQL11_RTM).120210-1846 )"
RemoteStackTrace = Nothing
SmoExceptionType = FailedOperationException {12}
Source = "Microsoft.SqlServer.SqlWmiManagement"
StackTrace = " in Microsoft.SqlServer.Management.Smo.Wmi.WMIProxy.ExecProcess(Object request) in Microsoft.SqlServer.Management.Smo.Wmi.WmiSmoObject.EnumChildren(String childTypeName, WmiCollectionBase
coll) in Microsoft.SqlServer.Management.Smo.Wmi.ServiceCol...
TargetSite = {System.Object ExecProcess(System.Object)}
WatsonBuckets = Nothing
The server not have problems and the local Sql Server Configuration Manager work fine.
I copied the tool on the server to run it
locally. Strangely, if I use the credentials of the current logged user the tool works
(mc = New ManagedComputer(serverName) )
If I provide explicit the credentials
(domain\username and password, but the same of user logged in the server)
is not working
( mc = New ManagedComputer(serverName, UserID, UserPsw) )
From a remote server instead
does not work in both modes.
The server configuration:os Win 2008 R2 EE Sp1 , Ms Sql 2008 R2 Sp2 10.50.4321
Any suggestion is
much appreciated
Many thanks in advanceHi Lydia
Thanks for your quick
response.
Unfortunately I had already considered this hypothesis
and the security settings on the object WMI
seems correct.
The user with which I run the program
is part of a domain's
group inserted into
the local administrators group. This group
has the flag "Remote Enable" active.
However, I verified that the
problem occurred since I updated my tool
to monitor and manage the new systems Sql
2012. The tool now uses objects
SMO 11.0 that I installed in the development environment,
and on server where it is scheduled
the tool, through the package
SharedManagementObjects.msi.
The documentation says that SMO 11 is
compatible with SQL 2005
and higher and, in fact, I only had problems
with one server. The old version of tool in fact work fine again.
This information will suggest
some ideas?
Thanks again
Giovanni Camurri -
Error while starting Oracle Management server service
Hi all,
We are about to administer our database using Oracle Enterprise manager. For that we have configured OEM in a Test PC and tried to connect our database.
First i have logged in to OEM Console with Sysman login id using the default password "oem_temp" and it prompts me to change the password, also i have changed the password as "xxxxx" and i have come out of OEM console and tried to relogin using the changed password.
i got the message as invalid login or password or
check for the availablity of Management server service"
i found that the service Oracle Management server which was previously running is not running now and i tried to restart that manually.
On doing that i got a message as
"Error 1053: The service did not respond to the start or control request in a timely fashion"
Would any one of u help me to solve this problem.
Thanks in advance..Hi-- could you please describe your administrative domain?
I need to know the operating systems on each of the
clients and the OSB admin server. Also, does 'obtool' CLI
tool work? Do any of the machines act as an apache webserver
for another application? Is there any other backup service
running on any of the machines?
thanks,
Judy
I noticed that when re-installing the OSB without the
Administrative Server (only Media Server and Client)
I got no errors at all (but still cannot connect from
another Administratice Server to my machine) -
Campus Manager report - Ports in error Disabled state
Hi,
I have LMS 3.2 and I wonder how Campus Manager collects information from the switch to generate a report of discrepancies, namely a report of "Ports in Error Disabled state"??
I find that I have ports in errDisabled state but Campus Manger doesn´t show this information in "Ports in Error Dissabled state" report. What could be the problem?
Thanks.Hi,
Campus Manager do snmpwalk on the ciscoErrDisableMIB to get the status of the error disabled ports.
Thanks,
Gaganjeet Singh -
Active Directory Management Gateway Service installation error
Hey,
When I attempt to install the 32 bit Server 2008 package from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2852 I get an error saying that it's not the correct version. Just in case I tried the 3 other versions, but as
expected they give the same error. Any ideas?
Thanks In Advance,Hi,
Based on the description, we can try to contact Microsoft Customer Support Services to obtain the hotfix to see if it helps.
A hotfix rollup package for Active Directory Web Service is available for the .NET Framework 3.5 SP1
http://support.microsoft.com/kb/969166
Besides, the following thread focused on the similar issue with ours and can be referred to for more information.
Active Directory Management Gateway Service - install problem
http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_install/active-directory-management-gateway-service/d02c3ee7-ee4d-e011-8dfc-68b599b31bf5?tab=question&status=AllReplies
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adilHI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil -
Error when copying the folder Manager Self-Service in the portal
Good Night.
I am implementing Employee Self-Service and Manager Self-Service
For ESS i did the following:
1. I created a new folder for my project.
2. I copied Employee Self-Service folder from the standard part into my folder.
3. I deleted the pages and worksets that not needed
4. I did the config in the backend and put the pcd in the backend config for it to be displaying the content.
And for MSS I wanted to do the same steps:
But the system display the following message of error:
Error
Source object not found. It may have been deleted.
[Error|http://www.freeimagehosting.net/uploads/0524ec1cc5.jpg]
The steps that i did are:
Portal Content==>Content Provided by SAP==>line_manager=>Right Click -->Copy.
And in the new folder --> Right Click -->Paste.
How can solve this issue?
Kind Regards
Edited by: consultor_ess_mss on Jan 29, 2010 3:11 AMHi, I solved this issue using the Content Mirroring Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/9eeb41873b45489c02d989a62cb560/content.htm
In this documentation is all the steps.
Kind Regards.
Maybe you are looking for
-
Hello, everyone, my name is rafl I have a problem with exchange 2013 active sync. I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013. but any p
-
I read through different solutions on this support site and nothing seems to work.
-
Disable prompt to save file after signing
I have created a PDF with digital signatures, then added submit button to submit form to next approver in the chain. I do not want the signer's to be prompted to save the file locally, just forward the document with signature. Can the prompt to sav
-
How to can create shadow at text in Photoshop. Ex: text has red color and its shadow has blue color
-
Snippet, iframe not playing the game. Flashskins player. What's the Path?
Hi guys and girls... I'm having snippet flash player problem. Searched around ALOT and seems like I've tried everything. I'm sure I haven't though. Maybe someone can suggest something else? So iweb 08, trying to embed a flashplayer, using an iframe.