Can 10g OAS run 10g Report server and 6i reports together?

Re-posted from the OAS thread: Can 10g OAS run 10g Report server and 6i reports together?
We have need to run 6i and 10g reports from the same physical server running OAS 10g.
Are there issues / conflicts?
There are hundreds of 6i reports called from many applications. Converting completely is a separate project on the books.
The need is to utilize 10g graphs on this urgent project. The graphing in 6i has not gotten along here with RAC and other distributed architecture. Additionally, I believe the 6i graph runtime would have to be installed on each client workstation... again, hundreds.
Thank you.

Hello,
You can install OAS 10g and Reports 6i on the same server as long as they are installed in different ORACLE_HOME ..
Take car to the value of the variable PATH ..
Regards

Similar Messages

How to Create A standalone Report Server and replce by in process server

Hi all,
I am new to oracle reports 10g, I have installed oracle applicaction server 10.1.2.0.2 on RHEL4 now i want to create a standalone report server and replace it by the in-process report server . I searched the net to get a proper step by step guide to do the above but dint got the same can anybody guide to step by step process to do the same and also file which are to be edited i user sh rwserver.sh -install server name bath=yes command and sh rwserver.sh server name bath=yes & commad to start it but i am not able to see the same in the enterprise manager . Thanks in advance...
Also please tell me if it is recommeded by oracle to replace the standalone by inprocess server.

Hi do i need to fire the following the command then
sh rwserver.sh -install server name bath=yes
sh rwserver.sh server name bath=yes &
are these correct
and then fire the following command to register it to enterprize manager
ORACLE_HOME/bin/addNewServerTarget.sh reports_server_name
Please correnct me if i am wrong
ANd i already fired (sh rwserver.sh server name bath=yes & ) command which in turn create a fine name server name.conf in th ORACLE_HOME/report/conf
now can i fire ( sh rwserver.sh -install server name bath=yes ) this command or there is some issues in that.
what should be sequence of firing these commands
and to test it after completing the activity
Edited by: Mohammed Afzal on Jun 30, 2011 4:26 PM
Edited by: Mohammed Afzal on Jun 30, 2011 4:28 PM

Report Server and ORA-03135 - Connection Lost

Hello,
We are running Oracle 10gR2 (AppServer, Report Server and Database) and we notice that in the error log of the database, we getting many error ora-03135-Connection Lost. After investigating a bit on this, i think i found the cause of those error. Error seem to be generated by the report server everytime it automatically shutdown an engine because engine was not use in the last 30 min. Is there a way to prevent the report server to cause this error in the DB log file ?? maybe it is only a setting to change.
And we don`t want to extend the timeout of the engine to prevent it to shutdown automatically because this will cause memory issue on the server if engine always stay up
Thank
Martin

Use death connection detection in the sqlnet.ora file. Usually setting SQLNET.EXPIRE_TIME is used to catch firewall timeouts, but in your case you could use it to detect that the report engine was stopped. Set SQLNET.EXPIRE_TIME to a slighty higher value than 30 minutes, say 35 minutes. Then each 35 minutes a probe packet is send to test if the connection is still alive. If not then the RDBMS ends the connection.
cheers

Pls Suggest server names for Reporting Server and Shared Services

Hi,
Can any one Pls Suggest server names for Reporting Server and Shared Services
Thanks in advance.

Report server name: OrclRpt
Shared Services: OrclSS

Can't Figure Out If My Macbook Can Upgrade , currently running 10.6.8 and wanted to get latest version os but can't upgrade current os Please Help !!!!

Can't Figure Out If My Macbook Can Upgrade , currently running 10.6.8 and wanted to get latest version os but can't upgrade current os Please Help !!!! Hardware Overview:
Model Name: MacBook Air
Model Identifier: MacBookAir3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBA31.0061.B01
SMC Version (system): 1.67f4
Serial Number (system): C0*******DQX
processor 1.4 ghz
mem 2gb 1067 mhz ddr3
startup disk Macintosh HD
<Edited by Host>

You can upgrade to Mountain Lion
Upgrading from Snow Leopard to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
 OS X Mountain Lion - System Requirements
 Macs that can be upgraded to OS X Mountain Lion
 1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
 2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
 3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
 4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
 5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
 6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
 7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
 Are my applications compatible?
 See App Compatibility Table - RoaringApps.
 For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Trouble with permission to open current PDF from one user to another user. what is the cure. i am running nthe current Server and updated Os 10.9.2

Trouble with permission to open current PDF from one user to another What is the cure ? I'm running the latest Server and OS 10.9.2.

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

TS3276 Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones ar

Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok

Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
Thanks!

HT4847 Can i use icloud as a server and share files with others as it was possible before?!

Can i use icloud as a server and share files with others as it was possible before?!

iCloud does not provide general file storage and sharing. You will need to find a third-party alternative - this page examines some options:
http://rfwilmut.net/missing3

What is available on new Windows servers that allow you to write scripts that can work directly with Windows, SQL Server, and Exchange Server?

What is available on new Windows servers that allow you to write scripts that can work directly with Windows, SQL Server, and Exchange Server?
a. PowerShell
b. isql
c. osql
d. sqlcmd

All questions seem to be from the interview or a test. I think I even took this test once, it's KForce test.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Views on CF Report Builder and Crystal Report

Dear all,
I would like to get your opinions on CF Report Builder and
Crystal Report.
As we all know, CF Report Builder is a new reporting tool.
But I find it very difficult to design a complex report maybe due
to limitation in its functionalities. Sometimes the tool shutdowns
by itself without any warning and reason. But the output is nicely
presented on a flash paper / pdf and it can be run on non-MS
platforms.
On the other hand, Crystal Report is a more matured product
but runs only on MS platform. It is very easy to use and very
powerful. I have been using it for almost 10 years. But the output
is not nicely presented on the web browser unless if we purchase
Crystal Report Enterprise to generate the report which is very
costly.
Can you all share your views? I need to make decision which
tool(s) to use. Really appreciate it.
Cheers,
Keiko

Hi Keiko,
Yes, CF Report builder is new and initially there was few
issues with this. But I guess now it's good after hotfixes.
Well, I am using CF Report Builder. It's good for me. You can
also design and develop complex reports, that depends upon the
query you are writing. You can also add subreports to your main
reports.
Mainly CF Report is platform independent and you can also
generate reports in PDF, EXCEL and FlashPaper.
Crystal Report is no doubt is very good, and it's there for
long years. I agree you can create complex reports with this, but
you also can do the same in CF also. You are using this for last 10
years, so I guess you should try something new and that is CF
Report Builder and you can judge then.
I am sure you will have fun with CF.
Thanks
Sankalan
(www.mindfiresolutions.com)

Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
Thanks

I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4

difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
I think Crystl Reprt 2011 has more function, is it right?

Hi,
I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
Here are few extracts from that which probably shows some light to you:
SAP Crystal Reports 2011
1. UI and associated processing servers remain the same as CR 2008
2. Incremental update to CR 2008 with a few new features*
3. Continue to provide current CR 2008 functionality as-is for existing customers
SAP Crystal Reports for Enterprise 4.0
1. Major update & redesign of the Crystal Reports Designer and associated processing servers
2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
3. Provide the foundation for all future releases of Crystal Reports
Differences between these two releases:
Data Source & Usage Type                                       General Recommendation
1. SAP BusinessObjects BI 4.0                                        SAP Crystal Reports Relational Universe (UNX) for Enterprise
OLAP Universe (UNX)
2. SAP NetWeaver BW 7 BEx Query (BICS)                    SAP Crystal Reports for Enterprise
3. SAP NetWeaver BW 3.5 BEx Query                             SAP Crystal Reports 2011
4. SAP Profitability Cost Management                              SAP Crystal Reports for Enterprise through Analysis View
SAP Strategy Management
SAP Budget, Planning and Consolidation
SAP Extended Analytics
5. Platform Driven Alerting                                                SAP Crystal Reports for Enterprise
6. Business Views                                                           SAP Crystal Reports 2011
7. Direct RDBMS or OLAP access                                    SAP Crystal Reports 2011
    SAP ERP/ Live Office Content/
    Enterprise search content
Regards
Gowtham

HT1277 Can you use Apple Mail program Rules and Gmail filters together?

Can you use Apple Mail program Rules and Gmail filters together? Does the gmail filtering override the Mail Rules?

Mail > Window > Previous Recipients

Where can i get the report server name in Reports 10g

Where can i get my report server name in 10G ?

Thanks ..
When i opened the bat file :
i did not find any report server name ...
This is my file :-
@echo off
REM $Header: rwdiag.bat 13-may-2005.03:21:21 sunaraya Exp $
REM
REM rwdiag.bat
REM
REM Copyright (c) 2005, Oracle. All rights reserved.
REM
REM NAME
REM rwdiag.bat - rw diagnostic tool
REM
REM DESCRIPTION
REM Script to run the diagnostic tool used to locate servers / monitor packets on the network
REM
REM NOTES
REM Usage: rwdiag.bat -find <server name> | -findAll [-conf <config file>] [-timeout <timeout in sec>]
REM
REM Usage: rwdiag.bat -monitor [-log <logfile>] [-conf <config file>]
REM
REM MODIFIED (MM/DD/YY)
REM sunaraya 05/13/05 - Added rwrun.jar to the classpath for bug 4361664
REM sunaraya 04/22/05 - Provided execute permission to the script for bug 4323789
REM sunaraya 04/14/05 - sunaraya_bug-4221172
REM sunaraya 04/14/05 - Creation
REM
set ORA_HOME=C:\ORANT
if "%ORA_HOME%"=="" goto ERROR
set CLASSPATH=%ORAHOME%\jlib\zrclient.jar;%ORA_HOME%\reports\jlib\rwrun.jar
%ORA_HOME%\jdk\bin\java -DORACLE_HOME=%ORA_HOME% -classpath %_CLASSPATH% oracle.reports.utility.DiagServerLocator %*
goto END
:ERROR
echo "ORACLE_HOME is not set"
echo.
:END

Can default report server and OC4J be used ..?

Hi,
*1*. I had a report server named stcreportserver that was working fine during the testing phase but suddenly it started throwing errors like cannot connect to report server,cannot open file and cannot get the job id........
I would like to know when i host this application on the windows server 2003 for the users can i use the default report server instead of creating a new server.....
*2.* I have got another application say app2 ...so for hosting do i need to make some additional configurations like creating a new oc4j instance for this application...or can i use the default oc4j instance that i use for my first application.
Note: I use the same database for both the application but different schemas.


We did some tests and discovered the following: 


Using "null" for the filename.


If I pass in "null" for the fileName, my code runs without any issues and the FRS file is now changed to a new random file, but this file does not have the .rpt extension. I can preview the report in the CMC without any issues, but the underlying file is missing the .rpt extension. I can manually add the .rpt extension and open the report in the CR Designer without any issues. In this case, the InfoObject's SI_UPDATE_TS property is updated.


Using a new filename 
If I change the fileName in anyway, such as prepending "1" to the fileName, my code runs without errors as well. I can see that the FRS file has been updated with the new name and it does have the .rpt extension. 
 
In this case, the InfoObject's SI_UPDATE_TS property is updated as well.


Currently we don't know the following things:


Is this supported, or is this just a bug?


I don't know the answer right now but at least you know more now. I'll try to update you if I hear anything.


Rob Horne 
<a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/robhorne</a>

Can 10g OAS run 10g Report server and 6i reports together?

Similar Messages

Maybe you are looking for