Can 1ROWCOUNT be used when reporting on Cubes?

Dear Bwers,
Can i use 1ROWCOUNT while reporting on cubes? If not is there any other alternative? Please let me know.
Thanks
Raj

Hi Raj,
Have you seen these 2 documents:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
Hope this helps...

Similar Messages

Session state can only be used when enablesessionstate is set to true.

When I try to open up a certain webpage it says; Session state can only be used when enablesessionstate is set to true. What does it mean and what should I do?

Contact the webmaster for that site and report the problem.

Can getGeneratedKeys() be used when executing batches of statements?

Hi all,
this question was posted in this thread:
Can getGeneratedKeys() be used when executing batches of statements?
but unfortunately I didn't find the answered appropriate.
That thread is now locked, so I would like to start it again here.
This is a summary of the other thread:
Can you retrieve keys generated by a batch of insert statements? The following code produces an ArrayIndexOutOfBoundsException from the Oracle T4CNumberAccessor.unmarshalOneRow() method (see stack trace at the bottom of this message).
The code is:
String sql = "INSERT INTO FOO (ID, NAME) VALUES (FOO_SEQ.NEXTVAL, ?)";
String generatedColumns[] = {"ID"};
PreparedStatement pstmt = connection.prepareStatement(sql, generatedColumns);
pstmt.setString(1, "A");
pstmt.addBatch();
pstmt.setString(1, "B");
pstmt.addBatch();
pstmt.setString(1, "C");
pstmt.addBatch();
//EXCEPTION OCCURS HERE
pstmt.executeBatch();
The exception is:
java.lang.ArrayIndexOutOfBoundsException: 22
at oracle.jdbc.driver.T4CNumberAccessor.unmarshalOneRow(T4CNumberAccessor.java:190)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:610)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:216)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:955)
at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10580)
The only answer given was:
"You should directly specify how big your batching is. For that reason you may use ExecutionContext where you can set setBatchingLimit(int) and setBatching(bool). This operation will tell execution context the size of supposed batching and also should be batching performed at all or not. You can add batching jobs but you can not execute the jobs without proper initialization of batching job size - it will fail with out of bounds."
ExecutionContext is not something I found in jdbc drivers, so I'm a bit confused about this answer.
Did anyone solve the problem?
Thanks,
Michele

>
We have the same problem. No solution so far.
>
I never found a definitive solution but testing seems to show that this is not possible.
There is no code that can be written to get the generated keys if batching is used.
This is because the 'getGeneratedKeys' method must be called on the prepared statement and would return the generated keys as a ResultSet object. But when batching there is only one prepared statement but multple sets of parameters, one for each batch entry.
Thus there could only be one call to 'getGeneratedKeys' since there is only one prepared statement. This strongly implies that it is not possible to use 'getGeneratedKeys' when batching.
See Retrieval of Auto-Generated Keys in the JDBC Dev guide
http://docs.oracle.com/cd/B19306_01/java.102/b14355/jdbcvers.htm#CHDEGDHJ

AIR 3.8.0.440 / iOS: build fails with "ld: -pie can only be used when targeting iOS 4.2 or later"

With AIR 3.8.0.440, iOS build with "adt -package -target ipa-ad-hoc" fails with a linker error:
ld: -pie can only be used when targeting iOS 4.2 or later
What's the correct option to suppress this error or does it need a fix for adt?
In the app.xml,
<key>MinimumOSVersion</key>
<string>5.0</string>
is already present in the iPhone InfoAdditions section.
(Building the same app with AIR 3.8.0.370 is fine)

Hi,
Can you make sure that both your old ane and new ane are not present in your extensions directory.
Also, how are you zipping/unzipping the ANE?
If you are on a Mac, try these steps on the terminal:
1) Create a new temp directory, say temp (mkdir temp)
2) cd temp
3) Copy the ane you need to make changes to into this directory.
4) unzip nameofane.ane
5) rm nameofane.ane
6) Make changes to the platform.xml file using a text editor or vim
7) cd to the temp directory again, (if you are now elsewhere)
8) zip -r nameofane.ane .
9) Copy the ane file created into your extensions directory, where you have placed the other extensions and then, package the IPA using adt.
If you are on Win,
1) Rename the .ane to .zip
2) Extract the contents of .zip
3) Make changes to platform.xml and save it.
4) Go back to the directory where you extracted the files, select all the folders/files and right click to zip them back.
5) Rename the .zip to .ane and then, package the IPA.
It should work.

Problem with ANE - "ld: -pie can only be used when targeting iOS 4.2 or later"

I'm trying to compile a simple AIR Mobile app for iOS, incorporating an ANE to support Localytics
http://flashsimulations.com/2012/06/18/localytics-adobe-air-native-extension/
Compilation fails with the message "ld: -pie can only be used when targeting iOS 4.2 or later"
Surely 7.0 is later than 4.2! (I'm using Flex 4.6 - AIR 3.9 SDKS). Tried building with FDT and with Flash CC, and against earlier versions of the iOS SDK (6.0, 5.0).
Any suggestions?

thanks, but can you be more specific? Presumably I add something in this part:
    <iPhone>
        <InfoAdditions><![CDATA[<key>UIDeviceFamily</key>
                                              <array>
                                                  <string>1</string>
                                                  <string>2</string>
                                              </array>
                                              <key>UIStatusBarStyle</key>
                                              <string>UIStatusBarStyleBlackOpaque</string>
                                              <key>UIRequiresPersistentWiFi</key>
                                              <string>YES</string>]]></InfoAdditions>
        <requestedDisplayResolution>high</requestedDisplayResolution>
    </iPhone>

ASP Web Forms Error: Session state can only be used when enableSessionState is set to true

Hello,
I am developing a custom application page for a custom Web Forms I am creating, which I plan on using for custom task form into SharePoint 2010 Foundation.
Currently, I am trying to test it in Debug Mode using Visual Studio 2010 but when I am trying to use Sessions I get the error:
Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration>\<system.web>\<httpModules> section in the application configuration
I've already done this on trying to fix:
On my page
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="TestForm.aspx.cs" Inherits="TestForm" EnableSessionState="True" %>
And on my web.config
<pages enableSessionState="true">..<httpModules>
<remove name="Session" />
<add name="Session" type="System.Web.SessionState.SessionStateModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
</httpModules>
Note: I am getting an error when I try to add <module> into web.config
ASP .NET State Service is currently running.
And the part where it keeps error is when in PageLoad, I try to set a List object something like this:
List<object> myobject
get
if (Session["object"] == null)
Session["object"] = new List<object>();
return Session["object"] as List<object>;
set
Session["object"] = value;
protected void Page_Load(object sender, EventArgs e)
myobject= new List<object>();
BUT the error still persists! I also try to restart IIS but still the error still happens.
I am running out of ideas so can you help me out?
Thank you!

Could be your skype intercepting your requests at 80 port, in Skype options uncheck
Or Your IE has connection checked for Proxy when there is no proxy
Or your fiddler could intercept and act as proxy, uncheck it!
Solves the above problem, It solved mine!
HydTechie
HydPhani

WLST - Can it be used when AdminServer is down?

Can you still use WL scripting when the AdminServer is unavailable?
I'm looking for an alternative for domain management if we experience the loss of an AdminServer and prior to getting the AdminServer back online.

yes, you can directly connect to the managed server.
HTH,
-satya
BEA Blog:
http://dev2dev.bea.com/blog/sghattu/
Get Involved in CodeShare:
https://wls-console-extensions.projects.dev2dev.bea.com/
https://wlnav.projects.dev2dev.bea.com/
https://eclipse-wlst.projects.dev2dev.bea.com/
https://wlst.projects.dev2dev.bea.com/

TS4337 Ever since I updated the OSX (V 10.9.1) iCal can't be used, when I open it a message pops saying: The server responded with an error, couldn't move calendars to iCloud because an error occurred. I turned off icloud and the same keeps happening.

Mail is not functioning right, as well as iWorks. And everything started to break down since I updated the OS please help!

To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

My iPhone4S can't be used when it upgraded to 5.01!!!

I used OTA to upgrade my phone to 5.01 but after that my phone can't call or use message. And I google it that so many people have the same problems. What's happens? My phone model is MC920LL/A.

how did you remove iTunes? Did you uninstall only iTunes or all components? This is necessary.
Check out this : http://support.apple.com/kb/HT1923
Use that article and try it again.
By the way, when you have an issue, the first thing to check is whether your software is up-to-date.

How to use created report with cube

Hi Friends,
I have created a report based on an Cube.
How can I view the report?
I tried to open in Report viewer, but it says unsuported object.
Any help is appreciated.
RG. Jimbob

Hi
the CR Server does not support SAP data source neither. I would suggest to install either BO Enterprise or BO Edge, install the int.Kit for SAP (both on your server and on the machine your CR2008 designer runs on) and build your reports based on SAP access drivers delivered with the int.Kit.
You can find more information about the installation of the intKit and how to build and publish your reports in Ingo's blogs:
BusinessObjects and SAP - Overview
/people/ingo.hilgefort/blog/2008/02/07/businessobjects-and-sap-part-i
Crystal Reports and BI Queries
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
Technical Material
/people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
Regards,
STratos

Can AQ be used when running in IBM's WebSphere Application Server?

Hi,
We are using IBM WebSphere Application Server (WAS) but not planning to use MQSeries. We want to use Oracle AQ. Is it possible to run an app in WAS with Oracle AQ functionality being used?
Anyone out there is doing this?
Any info. is greatly appreciated!
Thanks.
Alex

If you ever find the answer, please let me know. I am trying to do the same with WebLogic but with little success. I have participated in the following discusiions:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.jms&item=6218
http://marvel.oracle.com/pls/otn/f?p=17000:8:25148205767784132::NO::F17000_P8_DISPLAYID,F17000_P8_CRITERIA:40460583213,
If you are not using MDB in WAS or WAS MDB supports transacted session, then there is a good chance that you can use AQ/JMS. BTW, why don't you want to use MQ Series?

Are the music beds provided in iMovie copywritten or can it be used when posting to Facebook?

I used a music bed provided with iMovie '09 into a video and tried to post it to Facebook. Later, I got a notice from Facebook claiming that the video contained copywritten material. Is the music in iMovie royalty free so that I can post it to the Internet?

You can use it in FaceBook. I think that Apple owns the Copyrights, but you are issued a license to use them.
You can find the legalese in this Apple Document, section 2 G iii.
It can be tricky, because sometimes musicians will use the Apple jingles under this same license, and then copyright the results. You will have to explain to YouTube or FaceBook that you are licensed through Apple to use the track. It is usually a good idea to provide a credits page at the end of your movie AND in the description on YouTube or FaceBook detailing where you got the music and how you are licensed, but this will not keep the record companies from hassling you if one of their artists has also used the samples.

My key ( b + v ) can not be use anymore, please tell me about that..!

my keyboard is not usefull anymore, b and v -keys can not be used when I pressed..

thanks banhien(Dean),
but, I have been reinstall my OS, and the keys is fixed.
the other problem is after that my touchpad disabled, I using usb-mouse at this time..
arest;

Illustrator keeps quitting-notice others have had similar issues, not resolved-so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help-come on-someon

Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease

<moved from Adobe Creative Cloud to Illustrator>
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

Can we Report BW Cube using Cognos Fornt End tools

Hello, Experts.
We need some inputs on how to Report BW cubes using COGNOS front end tools.
is this possible?
do we need to develop new cubes out in cognos again for making reports?
and in BW cube some attributes of material are not navigational if we go to cognos can we use this attributs for drill down or filtering?
Thanks in Advance.
Bharath.

i am currently working on bi 7 with cognos 8.2 and go live very soon
- best approach is to use query as datasource for cognos (cognos consultants agree)
.......without query as datasource, cognos cannot see any reusable objects.
- If i recall, cognos can leverage attributes as navigational even if bw does not have them set that way.
- one downside is that you need to make sure all your rkf descriptions are locked down 100% because cognos uses the description in their xml definitions.
- Make sure you have an experience cognos framework modeler that knows ins and out and does not use simple wizards. same happened to us and lots of settings occured very late and slowed project.
reach out to me via my profile and i can give you pointers.

Can 1ROWCOUNT be used when reporting on Cubes?

Similar Messages

Maybe you are looking for