Can 2 bluetooth speakers be used at the same time to play music from iPhone 4?

I have two Sharper Image Bluetooth Speakers.  Right now, i am just able to play on one at a time from my IPhone.   I want to play music over both at the same time.  I want one inside my house and one outside.  Is there some app that would split the music to both speakers at the same time?  (Maybe something that splits the Left channel to one and the Right channel to the other?)

No

Similar Messages

  • Can 2 bluetooth devices be used at the same time for iPhone (one for audio and one for data)?

    I have an iphone 5 which actually connects to my car (Infiniti FX35)  bluetooth phone system, and I want to know if I buy, for example, the Cobra iRadar (which connects via Bluetooth with the iphone) it can be connected simultaneously with my cars phone bluetooth?
    If the car bluetooth manage the phone audio while the iRadar (irad-200) manage data (i think), they can be simultaneously connected to an iphone?

    Yes, the iPhone will support multiple simultaneous bluetooth connections as long as they are not using the same profile.
    I use a bluetooth heart monitor and bluetooth headset at the same time with my iPhone on a daily basis.

  • TS2972 how many IOS (iPads) can be used at the same time, and as a maximum, with home sharing?

    I would like to use multiple iPads at my residence and use home sharing for guests to watch content from my i-tunes, all on the the same network.
    what is the maximum number of IOS devices that can used at the same time, and be authorised on the "home sharing" at the same time?

    Thanks for a quick response!
    Under "Network adapters", here's what I found:
    - Broadcom 802.11g Network Adapter
    - 1394 Net Adapter
    - Marvell Yukon 88E8036 PCI-E Fast Ethernet Controler
    Two other wireless USB adapters are the same:
    - BLANC Mini Wireless USB adapter

  • How can i use in the same time input line and mic to recorder in several track whit SONAR

    I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english

    LIMACAR wrote:
    How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english
    Depending on which soundcard you have there, but if your card is capable for
    ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
    WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
    MME32 - > same w/ WDM/KS
    If you use Asio4All --> same w/ WDM/KS & MME32
    No mic and line source simultaenously w/ WDM/KS and MME32.
    You perhaps be able to do this w/ kX drivers.
    jutapa
    ADDED:
    You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
    Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
    jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • I can not send my Note through email and it used to work. The same problem to send picture from iPhone message

    Can't send Notes through email and it used to work. The same problem of sending picture from iPhone message. Did the reset twice but still not working

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    I am using a macpro 12 core computer
    I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    You can have them both on the same computer as I and many others have done for years.
    Just go ahead and install FCS 3 normally.
    There will be absolutely no problems.

  • Can I open two Safari windows at the same time?

    Can I open two Safari windows at the same time and split the windows in two on my screen? Right now, I have to open Safari and Firefox to get the split screen. I know I can press command to get multiple tabs, but that's not what I want. I want to use Safari on two open windows.

    HI,
    Open a browser window in Safari. Then Command + N
    Press command and ~ or ` to toggle between the windows.
    Carolyn

  • Jquery accordion where we can open more than one region at the same time

    Hi,
    I am trying to create a jquery accordion where we can open more than one region at the same time. I saw a post
    from patrick to do accordion where we can select only one region at a time.I am using Apex 4.0
    Using jQueryUI Accordion with APEX 4.0
    Any input on this will be appreciated.
    Thanks,
    Nav

    Hi,
    As I understand jQuery UI accordion do not have feature you looking for
    Regards,
    Jari
    Edited by: jarola on Sep 7, 2010 12:29 PM
    See documentation from here
    http://jqueryui.com/demos/accordion/#default

  • How can I run 2 Dreamweaver windows at the same time?

    How can I run 2 Dreamweaver windows at the same time on my
    PC?
    basically I have 2 monitors and I want to edit CSS on one
    monitor and have the html page open on the other so I can quickly
    look from one to another with in a split second instead of taking
    that extra time to switch back and forth using the tabs at the top,
    I know I should probably invest into a mac so i can work out side
    of the Dreamweaver application window and I will in the future but
    is there any way i can do this on my windows XP pro PC?
    Thank you
    Maurice

    Open the CSS in DW, and use F10 to open the Code Inspector.
    Place the
    latter as needed.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Random_Yggdrasil" <[email protected]> wrote
    in message
    news:gi2htb$j4j$[email protected]..
    > How can I run 2 Dreamweaver windows at the same time on
    my PC?
    > basically I have 2 monitors and I want to edit CSS on
    one monitor and have
    > the
    > html page open on the other so I can quickly look from
    one to another with
    > in a
    > split second instead of taking that extra time to switch
    back and forth
    > using
    > the tabs at the top, I know I should probably invest
    into a mac so i can
    > work
    > out side of the Dreamweaver application window and I
    will in the future
    > but is
    > there any way i can do this on my windows XP pro PC?
    >
    > Thank you
    > Maurice
    >
    >
    >

  • How to use at the same time the audio sounds of a keyboard & the midi sounds with mainstage

    Hello! hope you can shed some light on my problem! I want to be able to use at the same time the real sounds of korg sv-1(stage keyboard, but it could be any stage piano with USB midi) and use other sounds from mainstage. Of course i switch between patches and sets with a footpedal so i can be quick with my changes of sounds so I try to keep my hands on the keys.
    My question is: Is there a way that one moment for example i have a silend patch (from mainstage) and the real sound i want passing through audio and the next moment silence from korg and the next patch a sound from mainstage? Or even combine them. I mean in general how am I able to integrate the sounds I prepared and organised in patches in mainstage with the beautiful piano & rhode sounds of my sv-1?
    thanx in advance for your response!

    Yes. To have a silent Mainstage patch, simply do not create any instrument channel strips. To have the SV-1 silent on a patch you should be able to set and save the volume for that patch to 0. As an alternative you could turn local off on the SV-1( this function will reset to local on after the SV-1 has been turned off). With local off you can determine with each Mainstage patch whether or not you want to transmit MIDI to the external instrument(SV-1) channel strip. If you have local on, be careful not to create a MIDI feedback/loop with the SV-1. This is a lot of info to digest at once, so take it slowly, step by step. Snapshots below are somewhat in order.
    Click on the cog wheel in the upper right corner of the channel strips section to get to this menu. Select add external instrument channel strip.
    The external channel instrument strip will look like this.
    Click on the MIDI output box to show the display below and choose your external keyboard destination(SV-1).
    In the channel strip inspector you can send patch changes to the SV-1.
    Here is where you select the MIDI input for routing MIDI to the SV-1. If want no SV-1 sound for this Mainstage patch, select none.
    You'll need to play with these parameters to get the desired results. Stepping through the MS patches with a footswitch can be done, too, but that can wait for now. Post another question when you master these steps.

  • How many meetings can be opened by one account at the same time?

    I've tried Adobe Connect trial version.
    There are few questions about the product.
    1.How many meetings can be opened by one account at the same time?
       I could open 9meetings at the same time using other PCs. What is the limit?
    2.What is the maximum of students in a meeting?
       I'm thinking of buying monthly/Individual product.
    3.The meeting never end even though host is out of it. But we want to control.
       Can host close a meeting so that all participants are out of the session?
    Thanks for your attention.

    This depends on your licensing.
    If you are using a Named Host license, then you can open one meeting at a time. If other members of the Meeting Host group are present in a room, then it should allow you to have multiple rooms open, one for each Meeting Host licensing being used.
    If you are using the Concurrent Learner license, then each meeting you join uses a different licenses, so as long as you have concurrent seats available, you can open as many rooms as you want/need.
    Maximum number of attendees (students) would be your room's concurrent maximum, less your self. The monthly version of Connect offers 25 concurrent attendees in each room, so that would be 24 students and you.
    The meeting does end after it is dormant (no host) for ~15 min, however you can use the End Meeting function (Meeting > End Meeting) to close the meeting and remove everyone, including yourself, from the room.

  • Error : Old and new exceptions cannot be used at the same time.

    HI ALL,
    i build a new exception class with message class and i want to replace the
    old exception that i had in the method ,what i did is delete the exception from the method
    signature and add the exception class .
    the problem is that when i try to activate the method i get error :
    Old and new exceptions cannot be used at the same time.
    CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
          EXPORTING
            alg            = 'MD5'
            data           = iv_iss
          IMPORTING
            hash           = lv_issu
          EXCEPTIONS
            unknown_alg    = 1
            param_error    = 2
            internal_error = 3
            OTHERS         = 4.
        IF sy-subrc <> 0.
          RAISE EXCEPTION TYPE cx_user_mng EXPORTING
          textid = cx_user_mng=>wrong_isrs.
        ENDIF.
    I want to use the new exception class ,
    how can i avoid this error ?
    Best Regards
    Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
    Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

    Hi Joy,
    Check this link.
    [Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
    Old and new exceptions cannot be used the same time, what does this mean???
    Regards,
    Lakshman.

  • Can ADF keep multiple pages open at the same time?

    My company is currently developing an application to upgrade a client's FORMS system to one based on ADF. One of our client's biggest complaints with the new technology is that he can't work on many tasks at the same time, because our application can't work with "tabs" or "different windows", like Forms can with the "open form ()" function.
    Currently, we use a page called "main.jspx" with the main menu and a region under it, where we load all the "jsff" pages, which do all the different tasks in their systems (like autorizeBuyOrder.jsff, createNewOrder.jsff, etc...).
    Right now, I can only have one "jsff" page loaded on the region at once, and I wanted to make my application able to load and keep track of as many as the user wants. I was thinking on something like a tabs system, or multiple windows system. Does ADF provide any elegant way to do this? Any material you can recommend me?
    Much appreciated,
    Daniel

    Daniel Kaiser wrote:
    Hm, yes, this looks like it could be a possible solution for my problem. I'm gonna try to apply this to my app and get back to you. Thanks for the helpful answer!If you will have any questions on the application of the UI Shell template, then it is better to ask they here
    ADF UI Patterns & Best Practices

  • Can't recording  Midi  and Audio at the same time

    I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
    Tracy

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Maybe you are looking for

  • Date difference issue for Purchase order in R/3 and APO

    Hi,    I am sending the purchase order from APO to R/3. When I transfer the data through CIF and see the curresponding entries in stock requirement list in R/3, purchase order is 1 day earlier than in SCM. However, when this purchase order is CIFed b

  • Flowing Graphics in a Text Frame

    I am a new user of InDesign who recently inherited a user manual in which all the text is contained in text boxes rather than page columns. It's not a long book, about 33 pages, but the graphics don't flow with the text. Anytime you add or remove tex

  • Oracle GL error during journal import- ICM DOWN

    Hi all, I hit an error regarding the Concurrent Manager - Oracle GL during the journal import from GL_INTERFACE table. I've already populate the table with a set of dummy values. i've run the journal import to import the value from the table. i've cl

  • CUE "Service Module is failed"

                       Dears , i am getting this error on CUE .I reload the router but result is same .what should i do now?? .. #service-module service-engine 0/1 status Service Module is Cisco Service-Engine0/1 Service Module supports session via TTY l

  • Re-authenticate user/ electronic signature

    how do I check user Credentials? This is what I am trying to do: I am validating user after he enters his credentails. He is allowed to do some tasks. He can then approve/reject a process.  I would like to check if the person who is approving/rejecti