Can 2 separate Planning Servers be running on the same machine?

Dear All,
We are trying to setup Hyperion DEV and SIT environments into the same AIX server. We have
Shared Services
Essbase
EAS
APS
Financial Reporting
Planning
Oracle Application Server 10g
Oracle 10g DB
We use 2 separate user accounts and different HYPERION_HOME and ORACLE_HOME.
Everything seems fine except the Business Rule. When trying to pick the Planning locations, it's always pointing to the first instance of the Planning server.
I think it is related to the RMI registry service which is used to establish a communication between Planning, Essbase and HBR/EAS.
I am also running 2 RMI registry services on two different port. However, how can we tell the Planning, HBR/EAS to use which one for communication.
Any idea?

I found that the table HEAS.HBRPLUGINDATA contains the correct Planning RMI Port. It seems that EAS is talking with the correct RMI and Essbase Server.
I can submit business rule in Planning. However, I still can't submit business rule in EAS. Any idea?

Similar Messages

Can there be more than one JVM Running on the same machine

Can there be more than one JVM Running on the same machine.

Even JVM's of different versions (or vendors) can run on the same box at the same time.

Multiple instances of weblogic server 6.1 running on the same machine

Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
Madhu

Hi.
You can create new servers in your domain via the console. Be sure they are
listening to different ports, however. If your NT machine supports more than
1 IP address then you could alternatively bind each server to a different
address.
I'm not sure if this answers your question?
Regards,
Michael
m holur wrote:
Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
Madhu--
Developer Relations Engineer
BEA Support

Can a vodcast and a photocast run at the same time ?.

Hi,
I would like have a video podcast play and a photocast run at the same time is this feasible?
Geoff

Since they're different apps and there's no way to sync something like that: no. Sounds like you could just do a video slideshow to me. That's supported by all major video creation apps.
-S

Terminating ssl on a bigip, disco and oid running on the same machine

hi,
please could someone point me in the right direction.
I have a working discoverer server 10.1.2 running on a host on 7777
I have a working 10.1.2 SSO and OIM 10.1.2 server running on the same host on port 7779
Everything works fine with OID authentication being forwarded to AD servers.
I'd like to put a bigip in front of the SSO server and terminate the SSL on the bigip, because this seemed to be simplest.......
The bigip docs say delete the SSO Server from the partner apps (this isn't possible from the SSO web interface, I can only view it).
I need to get discoverer to connect to the https://[bigip] for SSO authentication.
I know I need to use ssoreg.sh to do this, the combination of commands eg which homes to use I am having difficulty getting right.
Thanks in advance,
Robbo

And also, how I can interchange message between independent applications (or services) on the same computer?The same way you would interchange messages between them if they were running on different computers.
You already seem to understand the concept of clients and servers passing messages between each other. There is nothing to prevent a "server" from being a client of another server. And there is nothing to prevent a client from running on the same computer as a server.

Can I vpn to an afp service on the same machine?

I have an XServe running 10.4.11 with AFP, httpd, and the firewall service. I've configured the firewall to only allow connections to the file share from our local network. This works fine. I want to setup vpn service so users can connect to file share remotely. I've turned on vpn and configured it, and clients can connect. They receive unused static ips on our local network. However when I try to connect to the server afp service from the client I get no response, it times out. I read another thread here which indicated I cannot use the vpn service to connect to another service running at the same ip address (VPN working in reverse!?). OK that makes sense. So I thought about running VPN on the second network interface (XServe with two nics, different ips). However in reading the 10.4 Server manual it says it's not possible to run services on different network interfaces, all services run on all network interfaces. This matches what I'm seeing in Server Admin. So does that mean what I am trying to do is impossible using only one machine?

Regarding running both the vmserver and the vmmanager on the same machine - I have this running. Maybe not the best architectural decision but I only have one large server for my testing. I don't remember excatly what i did but I got inspired form the folloeing post in the forum Simple VM-Manager install . I also added more memory to the dom0 domain to enable the much higher memory usage because of the vmmanager running there.

How can I separate 2 ipads which are on the same account?

I have an ipad and my husband also recently bought one. Unfortunately my son set my husband's ipad up on the same account as mine so we now have exactly the same music and photos on both plus my Gmail account is sending the messages to both. How can I separate these now but still carry on using the same laptop?

You will have to transfer the ringtones from the phone that has them to your iTunes library.
File>Transfer Purchases.
Then you can sync them to the other phone.

Can B1 2005 and 2007 be run at the same time?

I want to install B1 2007 on my server to make sure that everything runs over smoothly, then when I'm satisfied with the results, I'll just upgrade my workstations and hopefully have a seamless transition. Are there any errors that will pop up if I install 2007 at the same time as 2005? I have to make sure that there isn't a work outage.

Derek,
if you mean both version to sql server, the answer is yes, you can. If you mean to install the aplication, the answer is no, you cannot. If you want to test new version, youll have to use new computer or some virtual PC.
Petr

Can't get my threads to run at the same time :-(

Hi,
I hope someone can help me. I have an two instances of an object that extends thread. In it's run method, there is a while loop that iterates while an int x (that starts at about 450) is not less than 0.
In the while loop there is an x--; statement.
Also inside the while loop is a call to yield();
Also is a call sleep(5);
Also in the while loop is a statement something like "System.out.println(x);"
The int controls the vertical position of an icon (a JLabel) on the screen.
In the class that has the main method, two instances of the thread object are created one after the other and run one after the other, although the program keeps running the first one until it has finished before running the second one!
For example, the code looks something like this:-
o1.run();
System.out.println("o1 running");
o2.run();
System.out.println("o2 running");
And the end printout (with the println call from the thread objects) looks like this:-
o1 running
450
449
448
3
2
1
o2 running
450
449
etc.
What's going on? Why won't it start running the second thread straight after the first one?
Any help appreciated!

class test extends Thread {
private int i = 0;
private String strMess = new String("");
public static void main (String[] args) {
     test t = new test("first");
     t = new test("second");
test(String strIn){
     this.strMess = strIn;
     this.start();
public void run(){
     while(i<5){
          System.out.println(this.strMess + i);
          try{this.sleep(200);}catch(Exception e){e.printStackTrace();}
          i++;
}output:
first0
second0
first1
second1
first2
second2
first3
second3
first4
second4
class test extends Thread {
private int i = 0;
private String strMess = new String("");
public static void main (String[] args) {
     test t = new test("first");
     t = new test("second");
test(String strIn){
     this.strMess = strIn;
     this.run();
public void run(){
     while(i<5){
          System.out.println(this.strMess + i);
          try{this.sleep(200);}catch(Exception e){e.printStackTrace();}
          i++;
}output:
first0
first1
first2
first3
first4
second0
second1
second2
second3
second4

Can we have both 9i and 10g db running on the same machine

Hi,
I want to to exp/imp upgrade of my 9i db to 10g db.
Can I have both 10g and 9i installed on the same server?
Thanks,
Kavitha

Yes, provided that the HW, OS version and Patch level are certified for both 9i and 10g.
Install 10g into a seperate ORACLE_HOME -- whether under the same "oracle" account or a different (e.g. "oracle10g" account).
However, you should consider 11g as 10g is being desupported this month (i.e. no new patches / fixes will be available for 10g)
Hemant K Chitale
Edited by: Hemant K Chitale on Jun 9, 2010 10:58 AM

Can I use FCX for multiple users on the same machine?

I have one mac pro, and two video cmpanies. I have two users on my machine and would like to set up two different final cut x workplatforms. Is that possible?

Of course, you can use FCP X from two different user accounts on your machine. The question here, I believe, is how to separate the content that each user accesses.
One obvious way to achieve that would be to store the content in the system disk - that would put events and projects in each user's Movies folder. But that is a bad option, for performance reasons, and more.
You could have separate external disks for each user to store his content.
Also, you could use different disk images which could, say, be all stored in the same internal (but not system) drive.

Sending mail with php via postfix to EIMS running on the same machine.

Hello it was suggested I clarify and repost this question as previously I had posted it in a already answered thread,
I am running EIMS as my mail program on my Mac OS 10.4.6 Server for email.
http://www.eudora.co.nz/
I need to send email through the standard php mail command from my php scripts because many scripts written by others use this command. (Rewriting all the php apps written by third parties to uses another mail library is not an option.)
This forces me to use postfix to send the emails. I have already tried the EiMS command line tool and this program is not up to the task.
I had postfix configured properly as a "Null Client" so that postfix delivers mail to another server and doesn't try to deliver mail to itself or listen for new mail coming in. I got the instructions for the null client from here:
http://www.postfix.org/STANDARDCONFIGURATION_README.html#nullclient
This was working fine but I have changed my server to use open directory and in the process, I had to change the hostname of my server from shenzhenparty to shenzhenparty.com. My original server name was not a fully qualified domain name and so postfix didn't know it was sending mail to the same server. Now postfix is able to detect a mail loop again.
You can take a look at the log below:
May 29 14:30:21 shenzhenparty postfix/cleanup[23298]: 506E15F725C: message-id=<[email protected]>
May 29 14:30:21 shenzhenparty postfix/qmgr[23034]: 506E15F725C: from=<[email protected]>, size=868, nrcpt=2 (queue active)
May 29 14:30:21 shenzhenparty postfix/error[23301]: 506E15F725C: to=<[email protected]>, relay=none, delay=0, status=bounced (local delivery is disabled)
May 29 14:30:21 shenzhenparty postfix/smtp[23302]: warning: host mail.shenzhenparty.com[210.17.235.228] greeted me with my own hostname shenzhenparty.com
May 29 14:30:21 shenzhenparty postfix/smtp[23302]: warning: host mail.shenzhenparty.com[210.17.235.228] replied to HELO/EHLO with my own hostname shenzhenparty.com
May 29 14:30:21 shenzhenparty postfix/smtp[23302]: 506E15F725C: to=<[email protected]>, relay=mail.shenzhenparty.com[210.17.235.228], delay=0, status=bounced (mail for mail.shenzhenparty.com loops back to myself)
May 29 14:30:21 shenzhenparty postfix/cleanup[23298]: 5B1C55F725E: message-id=<[email protected]>
May 29 14:30:21 shenzhenparty postfix/qmgr[23034]: 5B1C55F725E: from=, size=2809, nrcpt=1 (queue active)
May 29 14:30:21 shenzhenparty postfix/qmgr[23034]: 506E15F725C: removed
May 29 14:30:21 shenzhenparty postfix/error[23305]: 5B1C55F725E: to=<[email protected]>, relay=none, delay=0, status=bounced (local delivery is disabled)
May 29 14:30:21 shenzhenparty postfix/qmgr[23034]: 5B1C55F725E: removed
Postfix seems to have an option for everything, doesn't it have an option to disable this loop back check? i have looked through all the options and have not found a way. Below is my postfix configuration in case that helps:
shenzhenparty:~ deverman$ postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
html_directory = no
inet_interfaces = localhost
local_transport = error:local delivery is disabled
mail_owner = postfix
mailboxsizelimit = 0
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydomain = shenzhenparty.com
mydomain_fallback = localhost
mynetworks_style = host
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost = mail.shenzhenparty.com
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550
As postfix has given me a lot of trouble on this issue I don't see switching from EIMS to postfix as a viable option just to get php emails working on a Mac OS X Server. I also do not want to use an additional IP just to get emails working either because if I have to do that I might as well move to a managed solution on a linux box.
I hope someone has a suggestion. Thanks

You can add a private IP address so that one mta listens on the public and the other listens on the private. The ISP would not be routing the private IP, so there would be cost or even knowledge of the private IP.
I'm not saying that's an solution to your issue- but clarifying that it's easy to add alternate private IPs to an interface.
Jeff

How to find my class is running in the same machine or not

Hi,
Can any one help me, I have a class called TestClass it has a main method. I want to restrict this class, to run only one occurrence in my system. i.e. If I open 2 command prompts and If I run this class in 2 command prompts, in one command prompt it should run, in another command prompt it should display msg like "This class is already running in the system".
Thanks in advance.

You could simply create a text file, if that file
does not already exist. If it
does exist, you know you are already running. Just
remember to delete the
file on exit of the original running instance.This is not as reliable as the previously mentioned server socket approach. With this approach, if your program crashes, it may not delete the file. With the socket approach, even if the program crashes, the socket will be released.

How to recover from a lost trust relationship (or zone configuration) between the linux ZCM agent to the Primary Zone server running on the same machine?

I have tried:
zac retr, which fails as it says there is no zone to which this agent
is connected
zac reg, which fails because of error 34 Invalid device authentication
information
zac rereg GUID, which fails because of missing zone (as zac retr)
zac unr, which fails because of the same error.
zac ci shows the correct certificates
almost everything is working except registration refresh and location
refresh.
What to do in this situation?
ZCM 11.2 with latest update (Monthly update 1)
W. Prindl

This was yesterday resolved by NTS - you see the "quick" resolution
time of NTS if you subtract the date of the initial post from the date
of this post - with an absolutely simple trick, which obviously nobody
did know of. The support engineer got it from the developer team.
There is a switch in the
/opt/novell/zenworks/share/tomcat/webapps/zenworks-registration/WEB-INF/
config.xml configuration file, with which you can switch authentication
off for device registration.
You just need to add <Authenticate>false<\Authenticate> into the only
configuration this file contains.
This suppresses the error 34 on device registration and the device gets
registered correctly upon restart of the zenworks suite. After this is
done one can change back the above mentioned file to the original state
and restart the zenworks suite again.
The solution was really easy to deploy - the time till this resolution
was found was IMO too long.
W. Prindl
W_ Prindl wrote:
>I have tried:
>
>zac retr, which fails as it says there is no zone to which this agent
>is connected
>
>zac reg, which fails because of error 34 Invalid device authentication
>information
>
>zac rereg GUID, which fails because of missing zone (as zac retr)
>
>zac unr, which fails because of the same error.
>
>zac ci shows the correct certificates
>
>almost everything is working except registration refresh and location
>refresh.
>
>What to do in this situation?
>
>ZCM 11.2 with latest update (Monthly update 1)

Can PSE 6 and PSE 8 Run at the Same Time?

I have Windows 7 and recently upgraded to PSE 8 and have had problems with Photo Mail and email attachments. I did not have email attachment problems with PSE 6 so I wonder if I can run both 6 and 8. Will there be a catalog problem? When I loaded PSE 8 the first time the catalog needed to be converted. Will this make it unstable for PSE 6?

As requested.

Can 2 separate Planning Servers be running on the same machine?

Similar Messages

Maybe you are looking for