Can 24hours work with macbook pro harms to it?

hey there I should be online and give some files from internet and download 24hours so I should turn up my MacBook Pro(MC700) so can it harm to my mac?

Hi n,
No, that should not harm your MBP as long as it is not getting too hot and your fans are working properly.

Similar Messages

  • Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

    Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
    Thanks!

    It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    Ahmed
    Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
    Pattie

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • Will Pages work with MacBook Pro OS Snow Leopard 10.6.8?

    I am wondering if the Pages App will work with MacBook Pro OS Snow Leopard 10.6.8.  I am getting conflicting information from people, and I don't want to purchase and download the App if I am not able to use it.  Thanks for your help.

    Thanks so much for your help, Michael. Glad to hear it works for you.  This gives me enough confidence to go ahead and order the App.  Thanks again. 

  • Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?

    Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?

    Why not?

  • MacBook Air Superdrive?? Does it work with MacBook Pro

    Hello,
    I need an external Superdrive. Does the MacBook Air Superdrive work with MacBook Pro??

    No, it does not (at least, not without opening the drive and modifying the internal components).
    External optical drives from Sony and LaCie work well with the MBP. Here's ONE EXAMPLE, here's ANOTHER EXAMPLE, both from Amazon.

  • Does a dell c2660dn printer work with macbook pro?

    does a dell c2660dn printer work with macbook pro?

    According to their site, they offer no drivers for Mac, or mention anything about Apple.
    I would say no.

  • Does 'Network Connect' work with MacBook Pro?

    My safari unexpectedly quits when attempting to log into my company's VPN.
    - I log into our VPN website and the connection begins to initialize
    - with my MacBook, Safari (2.0.3) unexpectedly quits
    - with my PowerBook, 'Network Connect' automatically starts and the VPN connection completes without any problem
    Does 'Network Connect' work with MacBook Pro? Any ideas?

    Resolved. MacBook Pro was having trouble dowloading the 'Network Connect' application when I logged into my VPN client for the first time. I copied it from my PowerBook G4 over to the appropriate folder and it now works perfectly.

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • Does a Dell monitor that is compatible with PC work with MacBook Pro?

    Looking for a reasonably priced (under $200) external monitor to use with MacBook Pro. Any suggestions?

    Hello bkford
    I use an HP monitor with mine, Just by an adapter, I bought a VGA to mini display, and it worked fine!
    Good luck
    Dustin

  • Can't get bluetooth headphones to work with MacBook Pro

    I just bought a pair of Bluetooth stereo headphones.  They work fine with my iPad and my iPhone.  I paired them successfully with Bluetooth on my MacBook Pro.  However, when I try to use them with my MacBook Pro it asks if I want to use them as stereo or mono.  No matter which I choose I immediately get the error message "There was an error connecting to your headset.  Make sure it is turned on and within range."  How do I solve this?

    There is a forum however it's not the most intuitive to locate. It's located in the Snow Leopard forum and can be found at:
    http://discussions.apple.com/forum.jspa?forumID=1344
    Roger

  • Can bluetooth gps work with MacBook Pro?

    If you have an iPhone, you have a gps and bluetooth. I'd like to get a MacBook Pro to sync with that geo locating capabilities, and/or with a Dual XGPS150. Anyone know a way to do this? Is it possible?

    Thanks for the reply chattphotos. It just seems odd that Apple would not recognize this would be a useful feature for astronomers, geologists, photographers, and other professions that use geo-related laptop applications. Oh well.

  • External Display not working with MacBook Pro 13" (early 2011)

    I just bought the current MacBook Pro 13" (i7 processor). My external display (Benq 20"W, 1600x1050) always says "No Signal Detected!". I've tried it with a DVI-Adapter (Griffin Video Display Converter) and with a VGA-Adapter (LMP Mini DisplayPort-VGA-Adapter). With lower resolution I once got a picture (but with weird lines). On my old MacBook (white, 2.16 Ghz) there was never a problem with this display (also OS X 10.6.6). Who can help?

    Check this post if you want more info:
    http://discussions.apple.com/thread.jspa?threadID=2774718
    The gist is that DVI is currently very iffy through Thunderbolt. Mini display -> mini display OR mini display -> HDMI should work fine. It's most likely not your adapter itself but the fact that it's DVI.
    If you can, get a mini display -> HDMI adapter and try that (assuming your external has HDMI).
    I should hear back tomorrow or Monday from apple engineers with more specific info about this issue and I will update then.
    BTW- DVI anywhere in the chain will make things fail. Mini Display -> DVI and a DVI/HDMI cable won't work with any reliability (I've tested it on three completely different monitors).

Maybe you are looking for

  • Error running reports with new OMS

    Hello All, We had a bunch of reports scheduled in Grid Control. After migrating to a new OMS on a new server, reports are not being sent anymore. I've done some tests and the error I see is this: This is a scheduled report. The most recently generate

  • Office files protected with AD RMS Client / SDK and Office

    Hello, I'm facing a strange issue when it comes to open an office file that was protected with AD RMS Client (to be precise, with an application built with AD RMS SDK 2.1). I would like to understand the reasons behind this issue (maybe some missing

  • HT201317 Can you add related photos to someone else's shared photo stream that you're subscribed to?

    Can you add related photos to someone else's shared photo stream that you're subscribed to?

  • Error message with MobileMe Gallery

    Some time ago, I created a bunch of galleries with iPhoto and published them to MobileMe. Most of them were password protected because they were of children in my toddler's class. In the interim, my mac at work was stolen. As a result, I had to chang

  • Table refresh

    Thanks for the reply frank. But the thing is that i have a screen comprising of selectonechoices and textboxes. I have a af:table and a command button. When i select values in the components and then i click the command button then the values satisfy