Can 2D BarCode (PDF417) be generated in Reports?

Is it possible to generate 2D barcode (PDF417 spec) using Oracle Reports? What should I do in order to generate barcode?
Thanks,
Dejan Bogojevic

Thanks for your answer, but that is not helping me generate 2D BarCode (Spec PDF417) as I mentioned before.
Thanks,
Dejan

Similar Messages

Generate a report from the grid to get all the 10g instance name and size

Hi Guru
Greetings foe the day
can you help me to Generate a report from the grid to get all the 10g instance name and size.
If its passible you would help me a ton
Thank you

If you can see in you query, you asking to view dba_segments for one instance and the other query is over the MGMT$DB_TABLESPACES view but NOT "WHERE" clouse is using, and if ypu have more once instance then than view sum all the tablespaces sizes.
How many instanced are registed in your grid control?
http://www.jpuga.cl
Regards
user625256 wrote:
Hi
can any one help on this
The o/p
SQL> select sum(bytes)/1024/1024/1024 from dba_Segments;
SUM(BYTES)/1024/1024/1024
3549.80879
when i query from the above mgmt its returns 1,507,473.149 GB
select target_name DB_NAME,host_name Host,sum(trunc(tablespace_used_size/1024/1024/1024,2)) size_GB
from MGMT$DB_TABLESPACES group by host_name,target_name order by target_name
it gives the size as 1,507,473.149 GB
Thank you in advance

Generate barcode on paper layout PDF report - using IDAutomation

Hello,
Although i have asked in other threads, i please you to help me regarding this matter:
- i am generating PDF paper report (invoices to my clients).
- i need to print the barcodes on the invoices.
- i have used barcode fonts (i need 128 barcode font) and distributed the PDFs but the clients' machines do not read the barcodes properly when opening the PDF (just numbers, instead of the font).
- i have then edited the config files, so the barcode fonts to be embedded in the PDF (included in the registry path) but still when distributing the PDFs, the barcode is not displayed on regular machines, that do not have the barcode font installed.
The question is:
I am willing to purchase from IDAutomation their 128 barcode fonts. What to purchase?
- just the barcode fonts, and then i will be able in the end to embed the font in the PDF?
- or the barcode fonts with their PL/SQL package that will automatically embed the fonts in PDF?
Thank you so much,
Michael
Message was edited by:
kjt

If your machine can open the PDF barcode but your clients' can't, I'd first figure out the PDF stuff. Such as update clients' pdf software etc.
Think pdf barcode reports can be opened without the font installed. Though Reports Builder or Server needs the font installed to run/generate the report.
DC

Can we generate one report tab for each of the prompt values selected in the bobj 4.0 webi report.

can we generate one report tab which filters
with each prompt value selected in bobj 4.0 webi report.

Hi Shrinidhi ,
It can be achievable with static tabs created for each LOV .But this is not recommended because , object values can change dynamically .
It is good idea to use section on prompt object in the report .With sections great feature available is in larger report it’s easy to navigate using map. It displays the section tree.You can select the particular LOV to navigate.

How can we generate the reports in html or text file formats?

Hi,
Is there any package that can help in creating HTMLDB reports in .txt files or .html files? (Similar to TEXT_IO in Oracle Forms)
How can we generate the reports in html or text file formats from HTMLDB?
Thanks in Advance
Renjith

Hello all.
Bi Publisher is great, but has a very high price tag. It's even more expensive than Forms & Reports Services. We are considering APEX to replace Forms & Reports on the web, but the reporting limitations are still a problem.
I wonder if there is another option.
Thanks

How can we generate the report of backup,tablesapcefrom OEM / RMAN

How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...
2.)How can we generate the Backup status report also

user13584223 wrote:
How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...There are DBA_* views that expose the necessary information. They are documented in the Reference Manual.
2.)How can we generate the Backup status report alsoThere are rman commands that give that. They are documented in the Backup and Recovery User's Guide.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to [url tahiti.oracle.com]tahiti.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Can we generate a report on master data alone without Info cube?

Could some one let me know whether
Can we generate a report on master data alone in BEx without Info cube?
Thanks in advance.

yes you can generate a report .
use the master data infoobject and insert that infoobject as a infoprovider and design a query using this infoprovider and view your query on this master data in Bex Query...
cheers
Sunil

How can we generate a report in master data?

hi,
can we generate a report in master data,if yes pl give me the procedure, i am un able to get it.
thanks & regards
venkat

Hi,
Once we make the MAster infoobject as the data target, then we can create the report on the master data. to make the IO as Data target , you just need to mention the tick mark for Infoprovide check box in the MAster data /Texts tab page of the IO.
help says that:
InfoProvider:
This indicator specifies whether the characteristic is an InfoProvider.
If you want to use a characteristic as an InfoProvider, you have to assign an InfoArea to the characteristic. The system displays the characteristic in the InfoProvider tree in the Data Warehousing Workbench. You can use the characteristic as an InfoProvider in reporting and analysis.
You can only use a characteristic as an InfoProvider if the characteristic contains texts or attributes.
You can define queries for the characteristic (more precisely, for the master data of the characteristic) if you are using a characteristic as an InfoProvider. In this case, on the Attributes tabstrip, you are able to switch-on dual-level navigation attributes (navigation attributes for navigation attributes) for this characteristic in its role as InfoProvider.
With rgds,
Anil kumar Sharma .P
IBM-India.

Can we change or edit the report generated by Report Painter?

hi,
can i add a field in select- option in the report which was generated by report painter?

Hi Poonam,
Yes you can change a Report Painter Report.
Hope the below threads help you:
https://forums.sdn.sap.com/click.jspa?searchID=14947520&messageID=5778256
https://forums.sdn.sap.com/click.jspa?searchID=14947520&messageID=5726896
Have A Good Day
Chaitanya.

Can I generate a report file in 'real-time'?

Hello all,
My question concerns reports in Teststand. Currently, the report is not generated and no results are saved until the entire execution is complete. This is OK if there are no problems during the execution (which can take several days), such as the PC locking up, etc. If this happens, the all the results are lost!
This has happened twice now, so I was wondering if there's a way to set it up to record the results as the test is run, and generate the report file at the same time. Basically, so if a problem crops up, we can reboot the machine, or restart the testing, and all the results we had before the problem will be recorded.
I'm probably making this way more difficult than it needs to be!
Thanks in adva
nce,
Dave Neumann
[email protected]

Dave,
I am doing all our report generation in text mode, as I didn't want to use the html format for legacy reasons. Without looking at your implementation I cannot say why it's doing what it is... However, I know that I talked with NI Tech Support when I implemented this example over a year ago, so they should be able to help with getting the example to work with the default process model. You should be able to set some break points to see what's happening in the process model after each step to see why you're not seeing any results on the fly. I do remember that it required some copying and pasting from several sections in the process model. Once you get it running properly, stepping through it should give you a good idea of where you'd want to ad
d a routine that writes to a log file as the tests are conducted.

Can one generate a report in Word document using PL/SQL?

We have a weekly status report application created in APEX, is there a way to generate a report in MS Word document (including formatting the doc) using PL/SQL by pulling data from Oracle database? Please shed some lights on this and any info and experience would be greatly appreciated.
We use Oracle11g and apex version 3.1.1.00.09
Thanks!

Hi Tony,
you are right, the NEW format isn't necessarily improved, also the user would need at least Office 2007 or higher.
Still it is possible to do that ;-)
And yes, there are other possibilities, but this question is dealing with Word documents (.doc i assume).
Also my Statement "docx = XML" isn't clear enough. Docx is a zipped file which contains a xml file. Details: http://en.wikipedia.org/wiki/Docx
sorry for the confusions,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
Work: http://www.click-click.at

Can we generate custom reports in oIM 10g

hi,
Is it possible to generate custom reports in OIM 10g? Is it a complex process?
Thanks

Thanks for the reply,
I am able to generate the report, but the issue is with the filter condition, I am trying to filter the results with a udf field but filtering is not happening and in logs the error coming is
Thor.API.Exceptions.tcColumnNotFoundException
at Thor.API.tcMetaDataSet.getStringValue(Unknown Source)
at com.thortech.xl.webclient.util.ReportUtilities.getLinkHref(Unknown Source)
at com.thortech.xl.webclient.util.ReportUtilities.populateTableDataForTabularDisplay(Unknown Source)
at com.thortech.xl.webclient.util.ReportUtilities.displayReportWithTabularLayout(Unknown Source)
at com.thortech.xl.webclient.util.ReportUtilities.displayReportWithLayout(Unknown Source)
at com.thortech.xl.webclient.actions.ReportAction.displayTabularReport(Unknown Source)
at com.thortech.xl.webclient.actions.ReportAction.displayReport(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:270)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:
and one more thing , how to give two conditions in where clause in stored procedure , for e.g i have given like
strWhereClause := 'usr_key IN(SELECT DISTINCT usr_key FROM usr) and UPPER(usr.usr_status) like '
|| UPPER(''''||strstatus_in||'''')
|| ' AND UPPER(usr.USR_UDF_CUSTOMATTR) LIKE '
|| UPPER(''''||strcustattr_in||'''')
|| ' ';
and its not taking the two values.pls tell me where its going wrong

2D Barcode (PDF417) in Smartforms

Hi Gurus,
I have a Smartforms with 2D-Barcode (PDF417).
I have to use header, field separators and foot into the barcode ( [)>, RS, GS, EOT...).
I define these separators like this:
CONSTANTS:
c_head VALUE '\0X5B\0X29\0X3E', " Complience Indicator
c_rs VALUE '\0X1E', " Format Trailer Character
c_gs VALUE '\0X1D', " Data Field Separator
c_eot VALUE '\0X04'. " Message Trailer
and then fill my barcode variable like this:
CONCATENATE
c_head c_rs '06'
c_gs '12SGTLVWAG01'
c_gs '2L' gv_werk_empf
c_gs '1L' label_data-ablad
c_gs gv_license_plate
c_gs 'P' label_data-kdmat
c_gs 'Q' gv_vemng
c_gs 'B' label_data-vhmku
c_gs 'V' label_data-eikto
c_gs '12S' label_data-vbeln
*c_gs '1T' label_data-charg
c_gs c_rs c_eot
INTO gv_pdf.
The problem is, when I scan my barcode I have the \ separator, and I can't delete it...
\06\12SGTLVWAG01\2L22\1L001X1\1JUN341382615100348063\P 0B1 200 345 E\Q1\B106925\V261988\12S0063397339\\
Any idea how I can delete this \ ?
Regards,
David

SAP ABAP Code to Generate PDF417 Barcodes
Preparing SAP data to be printed as a linear barcode can be a pain at times; when 2D barcodes with proper field separators are required the pain factor goes up. Most of the problems come from trying to convince SAP to assign non-printing control characters to the output variable. So, I have written a small example which demonstrates both how to generate a PDF417 barcode and the steps required to assign special characters to a string in ABAP. SAPscript cannot handle 2D barcodes, so this code will only really work in SmartForms.
DATA: gv_pdf417 TYPE string,
 gv_date_old TYPE likp-wadat,
 gv_serial TYPE num9,
 gv_kdmat TYPE vwahn-kdmat,
 gv_meng TYPE char10,
 lf_masterorsingle TYPE char3,
 lf_hex_rs TYPE x LENGTH 4 VALUE '001E',
 lf_hex_gs TYPE x LENGTH 4 VALUE '001D',
 lf_hex_eot TYPE x LENGTH 4 VALUE '0004',
 lf_char_rs TYPE c,
 lf_char_gs TYPE c,
 lf_char_eot TYPE c.
FIELD-SYMBOLS: <lfs_rs>,
 <lfs_gs>,
 <lfs_eot>.
WRITE is_wahn-wadat TO gv_date_old yymmdd.
WRITE is_wahn-exidv+11(9) TO gv_serial.
" Get non-printing control characters set
ASSIGN lf_hex_rs TO <lfs_rs> CASTING TYPE c.
ASSIGN lf_hex_gs TO <lfs_gs> CASTING TYPE c.
ASSIGN lf_hex_eot TO <lfs_eot> CASTING TYPE c.
lf_char_rs = <lfs_rs>.
lf_char_gs = <lfs_gs>.
lf_char_eot = <lfs_eot>.
" Master or single label
IF is_wahn-zzmastersingle = 'M'.
 lf_masterorsingle = 'M'.
ELSE.
 lf_masterorsingle = 'S'.
ENDIF.
CONCATENATE
'[)>' lf_char_rs
'06' lf_char_gs
'P' gv_kdmat lf_char_gs
'Q' gv_menge lf_char_gs
'V' gv_lifnr lf_char_gs
'D' gv_date_old lf_char_gs
lf_masterorsingle gv_serial
lf_char_rs lf_char_eot
INTO gv_pdf417.
If all goes well, then the variable gv_pdf417 should contain a string like the one below (the characters in the angle brackets are the hex codes for the control characters). In SmartForms the variable should be output in a text area with using the PDF417 barcode character formatting (your basis team will have to install it if it is not already available). The barcode at the top of page is generated from the string below.

Paper Form Barcode (PDF417)

All
Anyone can please tell me that what is the maximum data length we can embed in a Paper Form Barcode (PDF417)?
In case of any queries, please feel free to contact me.
Thanks in advance.
Syed Hussain Itiba Naqvi

Hi Scoot ,
I need little help on 2Dbarcodes
as per my understanding we have less then 800 character limit for barcode ,
do we have any impact of duplicate data on barcode ?
because when i gave same input to the barcode and scan it ,i dont find any data in it ?
for example: i gave "9" character 6000 times , which almost generates more 8 barcodes, but when i scan the barcode i dont find any data in it .
can you please help out whats the issue with it ?
you can mail me on my id :[email protected]
Thanks,
Satish Shirahatti

Error while generating the report on Test env (for divide condition)

Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advance

Is anyone having any idea about it...

Can 2D BarCode (PDF417) be generated in Reports?

Similar Messages

Maybe you are looking for