Can 30" Display be used as a TV?
Can the Apple 30" Cinema Display be used as a TV?
I have digital cable through comcast. My HD Tuner Box has a DVI output.
That being the case, would it be possible to use this display in combination with my tuner box to act as my television?
Add me to the lost of people who have the same question...And if the answer is yes, would it be possible to watch it full screen?
Similar Messages
-
How can I display and use the full RAW file?
Hi,
my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
So I would really appreciate if someone could help me with this.
Many Thanks
MartinHi Jao, Victoria, Lee Jay,
Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
Cheers
Martin -
How many columns can be display if use Class cl_gui_alv_grid?
Hi,
I have a fieldcat table which contains 200 items. But it only shows about 90 columns in my alv display.
I use function: LVC_FIELDCATALOG_MERGE to build fieldcatory and I found there are 200 records in my fieldcatory internal table when I debug it.
Can anyone give me some advise to show full culomns in my alv display?
Thanks a lot~Hi,
In Debug mode check check the NO_OUT field for each entry in the Field Catalog. If it has the value X for some fields then those fields will not be displayed.
Or check is there any Layout Variant is passed to the IS_VARIANT parameter. -
CAN CINEMA DISPLAY BE USED WITH LATEST MACBOOK PRO?
I'm considering buying the newest 15" macbook pro and using it formy desktop and mobile computer. I use a 27" cinema display. My"computer guy" said that the current macbook pro i have (the modelbefore this latest one) could not handle being plugged into a cinemadisplay because the graphics card was not powerful enough. Does anyoneknow if these latest models can be used with a cinema display?
If it uses ADC
<http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/AppleDisplayConnector.j pg/800px-AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter
<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>
and a Mini DisplayPort or HDMI to DVI adapter. (The Mac Mini should come with a HDMI to DVI adapter.) -
How can I display Excel using Word VSTO Addin.
Hi all.
I am a beginner.
And studying Word VSTO ribbon addins.
I wrote very simple one (works charm );
Microsoft.Office.Interop.Word.Application oAPP = Globals.ThisAddIn.Application;
oAPP.Selection.InsertAfter( " Hello, Word !! " );
oAPP.Selection.Collapse();
Now, I have to go on.
I want to display "Hello, Excel !! " from the same addin (from the Word Addin)
I tried to port the following VBA codes (into Word Addin);
Set oEXCEL = CreateObject("Excel.Application")
Set oWBOOK = oEXCEL.Workbooks.Add
oWBOOK.ActiveSheet.Range("A1").Value = " Hello, Excel !! "
oEXCEL.Visible = True
I do not know how to start from the very beginning.
I can not make "Application (for excel)" object at all.
VS says, the "Application" is not for the Excel but for the Word.
Yes, everybody know it. But, Excel has the same one too. So I tried to make casting. It never works.
I added required reference(s).
Wht do I have to do ?
Is it impossible, naturally ?
RegardsHello,
The
How to automate Microsoft Excel from Microsoft Visual C#.NET article describes all the required steps for automating Excel from any other application.
Anyway, the current forum is for VSTO specific questions. I'd suggest asking Excel or Word specific questions on the
Excel for Developers or
Word for Developers forums instead. -
How can i display Waveform chart in a subpanel using Vi templates.
Hi All
I am new to Labview hence need some help. I am trying to develop an application which reads some data from a Wireless Sensor Network (WSN). The WSN consists of base station connected to the USB port which recieves data from other sensor nodes. The data comes in a certain format. Node name, temperature reading, humidity reading etc. I want to read the data from the serial port and based on the Node name, i want to display the information for each node in s separate window or subpanel etc. So if a new node is detected then a new window is created for that node. Since all the nodes have the same sensors on board i only need a one template. I can read the data using the serial port, parse the data to detect which node it is and also what the sensor readings are. I have created a template VI for the sensor node. I am having problems in displaying the template VIs in a subpanel. I can succesfully display a Waveform graph in the subpanel but i am having problems in displaying a waveform chart in the subpanel. I can see the actual waveform chart in the subpanel, but i cannot see the plot. Would be greatful if someone could point out what i am doing wrong here.
Many Thanks
Raza
Solved!
Go to Solution.
Attachments:
template_graph.vi 16 KB
graph_template.vit 11 KBHi All
I think i have solved the problem. It seems like i was running the Vi in a loop. I have taken the Run Vi outside the while lopp and this works fine. Also i need to close the reference at the end.
Raza -
How can I display JTextFields correctly on a JPanel using GridBagLayout?
I had some inputfields on a JPanel using the boxLayout. All was ok. Then I decided to change the panellayout to GridBagLayout. The JLabel fields are displayed correctly but the JTextField aren't. They are at the JPanel but have a size of 0??? So we cannot see what we type in these fields... Even when I put some text in the field before putting it on the panel.
How can I display JTextFields correctly on a JPanel using GridBagLayout?
here is a shortcut of my code:
private Dimension sFieldSize10 = new Dimension(80, 20);
// Create and instantiate Selection Fields
private JLabel lSearchAbrText = new JLabel();
private JTextField searchAbrText = new JTextField();
// Set properties for SelectionFields
lSearchAbrNumber.setText("ABR Number (0-9999999):");
searchAbrNumber.setText("");
searchAbrNumber.createToolTip();
searchAbrNumber.setToolTipText("enter the AbrNumber.");
searchAbrNumber.setPreferredSize(sFieldSize10);
searchAbrNumber.setMaximumSize(sFieldSize10);
public void createViewSubsetPanel() {
pSubset = new JPanel();
// Set layout
pSubset.setLayout(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
// Add Fields
gbc.gridy = 0;
gbc.gridx = GridBagConstraints.RELATIVE;
pSubset.add(lSearchAbrNumber, gbc);
// also tried inserting this statement
// searchAbrNumber.setText("0000000");
// without success
pSubset.add(searchAbrNumber,gbc);
pSubset.add(lSearchAbrText, gbc);
pSubset.add(searchAbrText, gbc);
gbc.gridy = 1;
pSubset.add(lSearchClassCode, gbc);
pSubset.add(searchClassCode, gbc);
pSubset.add(butSearch, gbc);
}import java.awt.*;
import java.awt.event.*;
import javax .swing.*;
public class GridBagDemo {
public static void main(String[] args) {
JLabel
labelOne = new JLabel("Label One"),
labelTwo = new JLabel("Label Two"),
labelThree = new JLabel("Label Three"),
labelFour = new JLabel("Label Four");
JLabel[] labels = {
labelOne, labelTwo, labelThree, labelFour
JTextField
tfOne = new JTextField(),
tfTwo = new JTextField(),
tfThree = new JTextField(),
tfFour = new JTextField();
JTextField[] fields = {
tfOne, tfTwo, tfThree, tfFour
Dimension
labelSize = new Dimension(125,20),
fieldSize = new Dimension(150,20);
for(int i = 0; i < labels.length; i++) {
labels.setPreferredSize(labelSize);
labels[i].setHorizontalAlignment(JLabel.RIGHT);
fields[i].setPreferredSize(fieldSize);
GridBagLayout gridbag = new GridBagLayout();
JPanel panel = new JPanel(gridbag);
GridBagConstraints gbc = new GridBagConstraints();
gbc.weightx = 1.0;
gbc.weighty = 1.0;
gbc.insets = new Insets(5,5,5,5);
panel.add(labelOne, gbc);
panel.add(tfOne, gbc);
gbc.gridwidth = gbc.RELATIVE;
panel.add(labelTwo, gbc);
gbc.gridwidth = gbc.REMAINDER;
panel.add(tfTwo, gbc);
gbc.gridwidth = 1;
panel.add(labelThree, gbc);
panel.add(tfThree, gbc);
gbc.gridwidth = gbc.RELATIVE;
panel.add(labelFour, gbc);
gbc.gridwidth = gbc.REMAINDER;
panel.add(tfFour, gbc);
final JButton
smallerButton = new JButton("smaller"),
biggerButton = new JButton("wider");
final JFrame f = new JFrame();
ActionListener l = new ActionListener() {
final int DELTA_X = 25;
int oldWidth, newWidth;
public void actionPerformed(ActionEvent e) {
JButton button = (JButton)e.getSource();
oldWidth = f.getSize().width;
if(button == smallerButton)
newWidth = oldWidth - DELTA_X;
if(button == biggerButton)
newWidth = oldWidth + DELTA_X;
f.setSize(new Dimension(newWidth, f.getSize().height));
f.validate();
smallerButton.addActionListener(l);
biggerButton.addActionListener(l);
JPanel southPanel = new JPanel(gridbag);
gbc.gridwidth = gbc.RELATIVE;
southPanel.add(smallerButton, gbc);
gbc.gridwidth = gbc.REMAINDER;
southPanel.add(biggerButton, gbc);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(panel);
f.getContentPane().add(southPanel, "South");
f.pack();
f.setLocation(200,200);
f.setVisible(true); -
How can i display the values in the vector in a jsp using jstl
in a task i am recieving a vector in a jsp... how can i display those vector values in the jsp using jstl.... plz help me
thanks in advance<%
here you got vector say; v
pagecontext.setAttribute("varname",v);
%>
<c:forEach var="i" items="${varname}">
<c:out value="${i}">
</c:forEach> -
I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
When I put special characters in the import string file they showed up as ? (question mark)
The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
A) Is there a font which is directly German/ French etc and not regula font + script parameter?
B) Are there another required step
s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)This was discussed last week in this group- read the previous messages.
Look for the thread "Foreign Languages in Labview"
And recite the mantra
ActiveX is good
ActiveX is holy
All Hail Bill
Those who claim otherwise are heretics and not to be trusted
Actually, in this case the non-ActiveX suggestions may be good.
talia wrote in message
news:[email protected]..
> How can I display special characters of NonEuropean languages (French,
> Italian, Spanish, German and Portuguese.) using import string
> mechanism -
How can I display current iPhone GPS coordinates using compass app
How can I display current iPhone GPS coordinates, when traveling overseas with no access of data or wifi
using "iphone compass app"(Both the latitude and longitude) ??
if iphone compass app require any sort of data
what alternative would there be? (to document the coordinates)?Hi
Iphone 5s 16 gb 8.1
My fone freeze whenever i charge my fone its appear white screen with apple logo.. and as soon as i try to press hold home and power button
it shows battery drained sign>> i m facing this problem from last one week
and itunes also not getting cconnected
can any1 please help me out
sorry for poor english -
How can I display comments when using poll
hi Experts,
I am using wc11.1.1.5 with poll function, I published a poll with some questions and a text box for suggestion feedback, when I check result, I can only get answers for the question but no suggestions can be displayed, how can I get the suggestion displayed?
Best regardsYou have to customize surveyResults.jsff page fragment that is available in "WebCenter Polls and Surveys Service View" library. You can find this library by creating a WebCenter Spaces Task flow Customization project from Jdeveloper. Kindly do let me know if you need more details in this regard.
You have add output or label in surveyResults.jsff and then map its value attribute with RE of suggestion text area might be available in surveyResultBean class.
How to customize task flow, pls see following link:-
http://download.oracle.com/docs/cd/E21764_01/webcenter.1111/e10148/jpsdg_taskflows.htm#BACIEGJD -
How can I display total playlist size in iTunes 11. It used to be visible for each playlist or CD, but I can't find it now.
The Friend: Thanks from me too for that super simple fix!! I feel kinda stupid for not knowing that.
Too bad Apple didn't:
Give it a more intuitive name than "Status Bar"... "status" is what is shown at the top of the window along with the Artist and Song Title, e.g.; how far into the song/podcast/video I've played and how much is left,
Put the keyboard commands in a more prominent place in their release notes when version 11 came out so we could more easily find the information they decided to hide in this attempt to make the desktop less cluttered and
Allow us the option of displaying the data size along with the song count and duration just beneath the playllist title. The status bar is a redundant listing of information except for the data size! Poorly conceived!
Perhaps Apple will remedy this in a future release. For those of us who like to burn our playlists to CD, DVD and even a thumb drive this information is essential. WIthout it, we're left to guess whether a given playlist will fit on our target device.
Thank you! -
My 4th Gen iPod Nano isn't displaying a "Use iTunes to restore" message, but iTunes is displaying a restore message when I connect it. I have original music that I can't back up on my iPod. Is there any way that I can fix the iPod without restoring it?
It's not designed to work like this. When you sync, the iPod stores some information that basically says 'this iPod belongs to computer xyz'. Apple did this to prevent copyright issues (syncing someone else's music).
If you really want to do this, you'll have to at least tie both iTunes installations to the same account. Maybe have them sync with each other. -
Reg. can we display alv grid using field groups (extracts)
Hi,
can we display alv grid using field groups (extracts). is this possible. i have to develop a blocked alv.
tnks
Yerukala SettyNo, you will need the data in an internal table to use ALV.
Cheers
Allan -
Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.
This Apple article:
What are the requirements for TDM?
suggests that older iMac do not support Target Dispaly Mode.
Maybe you are looking for
-
Android devices not getting push notifications after a while
We have just installed a new Exchange 2013 setup and started to move mailboxes across. Users that have Android devices though are noticing that push notifications are not reaching them and checking in the ECP I can see their last sync times are a lon
-
Font size is computed as a function of the height of the annotation rectangle.
From Pdf reference: The default appearance string (DA) contains any graphics state or text state oper- ators needed to establish the graphics state parameters, such as text size and color, for displaying the fields variable text. Only operators that
-
A good microphone for Skype?
When I'm on Skype I use my external monitor, and my 15" retina MBP is in clamshell mode. This is why I need a microphone to use Skype. I heard that you can't use USB-powered microphones on a Mac. Is this true? What microphone can you recommend me? I'
-
Mac OS X 10.8 "You can't sign in at this time. Try signing it again." after the attempt to login to iCloud via System Preferences. Console log is following: com.apple.iCloudHelper[530]: AOSKit ERROR: (System Preferences[497]) AOSKC (myApplyID): Faile
-
SAPscript - Dynamic box position and height.
Greetings... How to print dynamic box according to the Element. I have an element with looping condition when i used box the line only printed on the first loop, but and no line printed on the next looping even though its is different element.. Belo