Can 32 bit OBIEE 11.1.1.5 be installed on a 64 bit windows machine?

We're having LOTS of problems getting the install of 64 bit 11.1.1.5 to work. Just as a curiosity - is it possible to install 32 bit OBIEE 11.1.1.5 on a 64 bit Windows 2008 server?
Thx,
Scott

Got you, and thanks for that clarification. You want the Premiere - Premiere Pro CS4 & Earlier Forum. Not sure of the answer, but someone there can help you.
Good luck,
Hunt
[Thread moved from Premiere Elements Forum]

Similar Messages

Installables for 32 bit windows machines

Hello,
It seems SAP has stopped providing installables for 32 bit windows machines. IS it correct?
If yes which SAP versions can be installed on - Windows server 2003 SP2 (32 bit).
Can we have ECC6 EHP4 based on SQL database on it?
Thanks,
Ambarish

Hi,
If you read the installation guide then following thing is mentioned there:
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system. Therefore, you
only see the folder Software Life-Cycle Options on the Welcome screen when you start the
installation from a 32-bit installation master DVD.
You might need to install dialog instances on 32-bit operating systems if you want to
use 32-bit SAP NetWeaver components, such as Adobe document services. However,
first check whether such 32-bit components can run on 64-bit operating systems. If
so, we recommend running these 32-bit components on a 64-bit operating system.
Thanks
Sunny

Database timeout issue in oracle 11g 64 bit windows machine

Hi ,
Database connection getting timedout for every 30 seconds in oracle 11g database 64 bit windows environment.
And the error we are getting is "Invalid user name and passoword".
After altering the schema passoword
alter username identified by pwd;
we are able to connect to database but it is getting timedout after 30 seconds.
Is there any parameter settings that requires changes or verifications.
We are facing this using sqlplus as well as through JDBC connection.
Thanks
Prasanna

Check profile assigned to user... there is a parameter idle_time.. increase this..

Using Acrobat 8.2.5 on a 64-bit Windows machine

I own Adobe Acrobat 8.2.5 Standard that I have used on my old computer. However, it will not load into my new 64-bit computer. Is there a way to make this work short of purchasing a new program?

Hi alliembaker,
Copying information from this doc Support policy | Acrobat 8 | Windows
Adobe has tested Adobe Acrobat 8.x (Standard and Professional) on Microsoft Windows 64-bit operating systems running on a 64-bit processor machine. This document describes the known limitations and support options available to users of Adobe Acrobat 8.0 in a Windows XP or Windows Server 2003 64-bit environment.
Support policy for Adobe Acrobat in Microsoft Windows Vista x64, Windows XP x64 and Windows Server 2003 x64
Adobe Acrobat 8.0 was not developed for the Windows XP x64 or Windows 2003 Server x64 operating systems running on a 64-bit processor machine. Adobe Acrobat 8.0 was developed for Windows 2000 SP4, XP Professional, Home Edition, or Tablet PC Edition.
If you use Adobe Acrobat 8.0 in Windows Vista x64, Windows XP x64 or Windows Server 2003 x64, please update to Acrobat 8.1. The Acrobat 8.1 update provides support for x64 based operating systems.
The Acrobat update is available on the Adobe website at www.adobe.com/support/downloads/.

I can not get the HPPhotosmart C6350 to fully install on my computer running windows 7 64 bit.

I am using a wireless setup and the installation appears to stall at HP Photosmart essential. I can print. The HP solution center will not open because the installation is not complete. I am trying to get to be able to scan from my computer.
This question was solved.
View Solution.

OK, let's try it again:
- Using the uinstaller in the Start > All Programs > Hewlett-Packard folder unstall the software.
- Start and execute Windows Update over and over until there are no more updates.
- Restart your PC.
- Without doing anything else or starting any other software download from the "Support & Drivers" link at the top of this page.
- After the install completes, restart your PC again.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Installing developer workplace on a 64-bit windows machine

Hi All
I've seen versions of this question asked in various forums before, but they were either unanswered or answered unsatisfactorily. I've recently acquired a new 64-bit hp laptop with 8 gigs of ram at considerable expense. It seemed silly to get a 32-bit system, this being the year 2009 and all. Besides, all that memory...
I was surprised to discover that the developer workplace (available as part of SAP Netweaver PI 7.1 EHP1 and SAP Netweaver CE 7.1 EHP1 install) would not install on my machine. I am running 64-bit Vista by the way. I could not wait for Windows 7, since my previous machine died and had to be replaced.
Now my question is: is there a way to get the developer workplace installed on a 64-bit OS like Vista and if so, how?
I've seen reference to a kernel patch in SAP Note 1040931 (NTCLUST.SAR) with regards to installing on Vista or Windows Server 2008, but I'm not sure how to use it, if it is applicable. The error I'm getting while running sapinst is:
Running msiexec failed with return code 1603: undefined
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
I cannot believe I am the only one running into this problem. Who wouldn't want to develop on such a machine??
Please comment.
Regards
Johan

Hi Johan,
I would recommend to run a virtual machine on your PC and install the Netweaver there.
I usally use VMWare Server with WindowsXP or SUSE there.
The advantange of this approach is that you can easily copy your installation later on and create sandboxes for any purpose.
Also you can easily move your Netweaver installation to other servers if necessary and you become independent of their host OS.
Just my 2 cents.
Cheers Frank

I can't open my i-Tune store after I installed it in my old windows XP? It just come out blank...

I had a old HP desktop with Windows XP. I installed the i-Tunes and it runs great but the i-Tune Store is not be able to work on the screen. when I click the the store it just came out blank... a bit inconvenient for update and buysing the music...any one know how to get this sloved?
thank
Li

If in photoshop cs3 you go to Help>About Plug-In and click on the words Camera Raw, what version does it say?
Which camera are the camera raw files from?
After you downloaded the Camera_Raw_4_6.zip, you unzipped (extracted) the file and then copied the Camera Raw.8bi to
Program Files x86\Common Files\Adobe\Plug-Ins\CS3\File Formats (windows 8 64 bit)
or
Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats (windows 8 32 bit)
replacing the existing camera raw 8bi?

How to reference MS Access database in ColdFusion MX 7 on 64-bit Windows

I am migrating customers from:
Windows 2000 Server (fully patched)
Internet Information Services (IIS) 5
ColdFusion 5
to:
Windows Server 2003 Standard x64 Edition (fully patched)
Internet Information Services (IIS) 6 (running in 32-bit
mode)
ColdFusion MX 7 (7.0.2) Standard
Unfortunately, some of these existing customers are still
using Microsoft Access databases instead of SQL Server. Having all
of these existing customers migrate to SQL Server is not yet
practical. On the old Windows 2000 / ColdFusion 5 server, they are
using OLE DB data sources to reference the MS Access databases
using the "Microsoft.Jet.OLEDB.4.0" provider. None are configured
to use ODBC drivers when referencing MS Access or SQL Server.
I have yet to figure out how to get ColdFusion MX 7 to:
- Create a data source that references MS Access databases on
64-bit Windows.
- Reference an existing MS Access data source created with
the 32-bit version of the ODBC Data Source Manager on 64-bit
Windows.
A bit of background information regarding MS Access on 64-bit
Windows:
- At the time of this writing, Microsoft has not
created/released 64-bit drivers for Microsoft Access and it's
unlikely they ever will, for understandable reasons.
- Contrary to seemingly popular belief, the Microsoft Jet 4.0
Database Engine does exist on 64-bit Windows. See the following
regarding version and file location information:
How to obtain the latest service pack for the Microsoft Jet
4.0 Database Engine
http://support.microsoft.com/kb/239114
- You CAN create MS Access based data sources within 64-bit
Windows, but they have to be made using the 32-bit version of "ODBC
Data Source Manager". I'm assuming these DSNs may only be used by
32-bit applications, but I have not tested that theory.
32-bit data sources:
ODBC Data Source Manager:
%SystemRoot%\SysWOW64\odbcad32.exe
Registry location:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC
Default file DSN directory:
C:\Program Files (x86)\Common Files\ODBC\Data Sources
64-bit data sources:
ODBC Data Source Manager:
%SystemRoot%\system32\odbcad32.exe
Registry location:
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC
Default file DSN directory:
C:\Program Files\Common Files\ODBC\Data Sources
The 64-bit version of "ODBC Data Source Manager" (under
Administrative Tools) only show "SQL Server" and/or "SQL Native
Client" as options when creating new data sources, unless
third-party software is installed that supplies additional drivers.
The 32-bit version of "ODBC Data Source Manager" (by default,
there is no shortcut for this in the Start menu) shows the typical
drivers seen on 32-bit versions of Windows, including SQL Server,
SQL Native Client, Microsoft Access, Excel, FoxPro, Paradox, etc.
When using ColdFusion Administrator in ColdFusion MX 7.0.2 in
64-bit Windows 2003 (IIS is running in 32-bit mode to allow
ColdFusion MX 7 to function at all), two problems are encountered
when dealing with MS Access (and presumably other 32-bit drivers).
In both cases, ColdFusion is trying to reference the registry
location for 64-bit data sources instead of 32-bit:
1. Creating a new data source within ColdFusion
Administrator:
Data Source Name: whatever
Driver: Microsoft Access
CF Data Source Name: whatever
Database file: (physical path to whatever.mdb)
(other settings are irrelvant for this example)
Error generated when submitting:
Unable to update the NT registry.
Cannot open HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC
Data Sources: Windows error number 5 occurred.Access is denied.
ColdFusion stores the data source, however a "verify"
generates the following error:
Connection verification failed for data source: whatever
java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket]internal error: Data source name not found and
no default driver specified
The root cause was that: java.sql.SQLException:
[Macromedia][SequeLink JDBC Driver][ODBC Socket]internal error:
Data source name not found and no default driver specified
2. Creating the data source using the 32-bit version of "ODBC
Data Source Manager" then trying to reference it with ColdFusion:
ODBC Data Source Manager:
System DSN or File DSN:
Name: whatever
Driver: Microsoft Access Driver (.mdb)
Database: (physical path to whatever.mdb)
(creation is successful within ODBC Data Source Manager)
Reference the above DSN within ColdFusion Administrator:
Data Source Name: whatever
Driver: ODBC Socket
Error generated when submitting:
Error accessing available odbc datasources. - Cannot open
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC Data Sources:
Windows error 2 occurred.The system cannot find the file specified.
ColdFusion MX 7 can't find the 32-bit data source on 64-bit
Windows because it's looking for it in the wrong registry location.
Can ColdFusion MX 7 be configured to look in
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC
instead of
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC
on a 64-bit Windows machine?

Paul,
Thanks for the insight on this. Regarding the initial problem
I ran into with creating Access based DSNs, very early-on, I
noticed there were two different driver options for Access
displayed within ColdFusion MX 7 Administrator:
Microsoft Access
Microsoft Access with Unicode
For reasons I'm am still baffled over, I somehow completely
forgot about and through the wonders of apparent tunnel vision,
completely overlooked the "Microsoft Access with Unicode" driver
option when I was running through my tests.
At your seemingly-obvious suggestion, I created a data source
using the Microsoft Access with Unicode driver and it worked
perfectly fine with the one customer's web site I'm using for
testing (of course, this is a copy--the production site is still
housed on the old ColdFusion 5 server). This obviously doesn't
actually fix the underlying issue with ColdFusion looking in the
wrong part of the registry on 64-bit Windows, but at least when it
comes to dealing with Access databases, your suggestion of using
the Microsoft Access with Unicode driver appears to be a functional
work-around. So long as there aren't any surprises waiting for me,
hopefully this will also work for the remaining ColdFusion sites I
have to migrate that are using Access databases.
Since you mentioned JDBC drivers in comparison with ODBC, I'm
pointing out a couple of references in case they're helpful to
anyone following this thread:
ColdFusion MX 7 - About JDBC
http://livedocs.adobe.com/coldfusion/7/htmldocs/00001736.htm
Types of JDBC technology drivers
http://java.sun.com/products/jdbc/driverdesc.html
http://java.sun.com/products/jdbc/
I don't actually develop anything in ColdFusion, so I'm
dealing with all of this from a server administration standpoint
since we do have some domain hosting customers that do develop or
at least have existing ColdFusion based sites. I am all
too-familiar with the caveats of using Access in any kind of
production or heavily used environment and have spent years keeping
users away from ODBC. For ColdFusion users, that meant creating OLE
DB DSNs and often having to fix poorly written SQL statements and
fixing ColdFusion date-related values and boolean values (the
common problems encountered when switching CF / MS Access users
from ODBC to OLE DB). I can only recall running into problems with
a single SQL Server based ColdFusion site when migrating from ODBC
to OLE DB. That customer never did get their many coding problems
fixed, so they're the only ones still using ODBC in CF. I have no
idea what'll happen when that one site gets migrated over--if it'll
even work. Obviously a lot of things have changed between
ColdFusion 5 and the MX versions that have come along afterward.
Thanks again for the Access with Unicode driver tip and JDBC
info. It looks like I can finally start moving forward again with
the site migration process.
Josh

INTERNET SALES B2B E-COMMERCE 5.0 FOR SAP on 32-Bit Windows

We are trying to install a central instance of the E-Commerce 5.0 for R/3 solution on a 32-bit Windows 2003 server, running on top of SQL 2005 32-bit Standard Edition. The Netweaver 7.0 Kit has an installation for IA-64 and X-64 but does not appear to have a 32-bit installation. Has anyone installed the E-Commerce 5.0 solution on a 32-bit Windows server? If so, on what DVD did you find the 32-bit Netweaver components for a centralized E-Commerce 5.0 installation?
Can someone also provide me with a link to the installation guide that explains what to install and how to install to a 32-bit Windows machine?
Kind regards,
Randy

Don't do it.
We upgraded from 4.0 to 5.0 and went live on 32 bit and performance was horrible. 12 users pounding on a test system was not enough of a stress test. When we had 100 prd users it was horrible and would crash the system. The IPC would crash. Had an emergency upgrade to 64 bit and life is much better.

HP P1102W printer crashes print service on 64 bit Windows 7

My P1102W randomly causes the print service to crash taking support of all other printers with it. I found a way to restart the print service manually, but this is a real pain. Also, printing two sided works on my 64 bit windows machine, but doesn't work from my other PC (a Windows XP HP Laptop). Single sided printout works from the Windows XP machine most times, but occasionally nothing shows up on the the printer, but there are no error messages.
Any chance that HP will fix the problems with this printer driver?

Hello-
I don't think your printer has network ability.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

When updating itunes I get the message the install package can't find a file (itunes.msi) I've searched but can't find this file. How do I install it?

When updating itunes I get the message the install package can't find a file (itunes.msi) I've searched but can't find this file. How do I install it?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

OBIEE on 64 bit Windows 7 ?? Why harder than Cognos, Qlikview and Tableau?

Hi --- Can you please elaborate this in detail..I am having issues while Installing OBIEE 11g version on 64 bit windows-7..
Can you please provide set by step instructions with screenshots(if possible). I tried all the websites available... but still having issues and it is consuming a lot of time...
I Downloaded...
Version for Java----> and the Path of the Folder is c:\java
java version "1.7.0_10"
Java(TM) SE Runtime Environment (build 1.7.0_10-b18)
Java HotSpot(TM) 64-Bit Server VM (build 23.6-b04, mixed mode)
---> Can you please keep us posted of the Environment Variables that we need to take care of on the Windows 7 machines. All the variables related to Temp Folders, Java and Others that were needed.
WebLogic Version Downloaded from OTN:::::_
wls1035_generic
Path of Temp Folder_
c:\Temp.
OBIEE Version Downloaded:::_
bi_windows_x86_111160_64_disk1_1of2 ----> Basically version 11.1.1.1.1.6.0 for Windows 64 bit.
Steps Followed::::
I installed the ofm_rcu_win_11.1.1.6.0_disk1_1of1 ---> Basically the 64 bit version.
Then
Installed the Loopback adapter:::_
---> In the hosts file i had only one line added (rest of the file is commented).
10.10.10.10 computername ---> where computername is the name of the computer.
Installed and Configured the OBIEE_
Installation fine with out errors and i did Software only Installation(the last option)...
While Cofiguring, it stuck up at the first step ... configuring Domain... Tried 10000000 times... and when checked the log file, showing the below message...
[2011-07-01T12:00:23.500+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3^OytODwWWFLzrI8A1E3LWh00000F,0] Found listening port from node manager properties: null
[2011-07-01T12:00:23.500+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3^OytODwWWFLzrI8A1E3LWh00000F,0] Unable to reuse node manager - port is null
[2011-07-01T12:00:23.500+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3^OytODwWWFLzrI8A1E3LWh00000F,0] No reusable node manager found.
[2011-07-01T12:00:23.500+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3^OytODwWWFLzrI8A1E3LWh00000F,0] Completed initial node manager configuration.
[2011-07-01T12:00:23.500+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3^OytODwWWFLzrI8A1E3LWh00000F,0] Assigning Port: 9556 to: NODE_MANAGER_PORT
I had previously installed Cognos, Tableau and QlikView... by far this is the one that took a very long time, even to download the files , installing and configuring...
Please let me know your thoughts.. Thanks a lot for your time.. please don't refer your individual sites or blogs to follow the installation.. as i already did followed most of them i found after googling... and some of them dont even point to the exact versions they were downloading....

Hi Guys -- Am finally able to install OBIEE11g...
Provided in the link were the pre-requisites that you need to make 100% sure for windows 7 64 bit install.
http://oraclebi.blog.com/obiee-11-1-1-6-installation/
Coming to the Issues I made...
For Enterprise Edition Installation (Option 2 in the graphical user interface installation screen)*
1.) I had "jdk1.7.0_10" installed in "C:\Java" folder.
When trying to install OBIEE 11.1 it install weblogic version "10.3.5" as this is not compatible with "jdk1.7.0_10" had Issues.
For Software Only Install*
1.) I had to download and install "wls1036_generic.jar" from OTN.
You need to make sure that you install it by following the below steps but not just by double clicking it... because it is doing a kind of 32 bit installation when double clicking (yaa that's strange) even though you were expecting an 64 bit.
a.) open command prompt
b.) go to the folder where "java -jar wls1036_generic.jar" was installed
c.) Then run "java -jar wls1036_generic.jar"
Other Issues*
1.) Turn off Windows fire wall during Installation.
2.) Uninstall Antivirus
Not sure about the credibility of the above two points, came across some websites am tired of trying all the options and at one point.. I turned them off and never turned them back on...
Source*:::: Various Websites based on the different errors and mix matching the Info, trying different options to solve an error/Issue.
Hope this is helpful to someone..... I Still say the Installation is not as straight forward as other BI Tools in the market.

OBIEE 11G 64-Bit Windows LDAP Admin Server Startup Issue

All,
I have OBIEE 11G installed on 64-bit Windows, and can see all my LDAP users inside Admin Console just fine. When I reorder my LDAP above the DefaultAuthenticator, and make them both 'SUFFICIENT', my Admin Server no longer starts. It hangs on a line in the AdminServer.log that roughly says '<Security initializing using security realm myrealm.>'. Has anyone ran into this? If so, how do you get the Admin Server to start with a non default LDAP authenticator? I've tried re-ordering numerous ways with the DefaultIdentityAsserter in the middle and at the bottom; I've also tried switching the Control Flags on both with REQUIRED and OPTIONAL, all to no avail. Finally, I tried deleting out the DefaultAuthenticator all together, and it still won't start. At this point, I'm assuming this is another 64-bit issue that was not tested properly. Any thoughts/help will be greatly appreciated.
Thanks in Advance,
Josh

Paul,
Unfortunately that made no difference. I have pasted in the startup log below. Perhaps someone has some insight into what's happening?
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <WebLogicServer> <HQ200-HYPPROD03> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1302613111266> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Apr 12, 2011 8:58:31 AM EDT> <Notice> <Log Management> <HQ200-HYPPROD03> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1302613111344> <BEA-170019> <The server log file D:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Log Management> <HQ200-HYPPROD03> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1302613111360> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Diagnostics> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111438> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "t3" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "t3s" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "http" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "https" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "iiop" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "iiops" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "ldap" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "cluster" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "clusters" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "snmp" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "admin" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <RJVM> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111657> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address          :7002
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111688> <BEA-002609> <Channel Service initialized.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Socket> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111719> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Socket> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111751> <BEA-000436> <Allocating 3 reader threads.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Socket> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111751> <BEA-000446> <Native IO Enabled.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <IIOP> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111907> <BEA-002014> <IIOP subsystem enabled.>
####<Apr 12, 2011 8:58:35 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613115079> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Apr 12, 2011 8:58:35 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613115704> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Apr 12, 2011 8:58:35 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613115797> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_m7FMisDU3HeeJX/MUK4nqmEiSqI=>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116266> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116594> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116704> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116751> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116751> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116751> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116766> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116782> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116782> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116782> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116797> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116797> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116797> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116813> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116813> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116813> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116813> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116829> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116844> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116844> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116860> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116876> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116907> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116922> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<Apr 12, 2011 8:58:37 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613117516> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Apr 12, 2011 8:58:37 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613117532> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Apr 12, 2011 8:58:37 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613117766> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
####<Apr 12, 2011 8:58:37 AM EDT> <Notice> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613117766> <BEA-090082> <Security initializing using security realm myrealm.>
Thanks,
Josh

How can I install photoshop elements on a 64 bit windows system?

How can I install photoshop elements on a 64 bit windows system?

You just use the appropriate install disk/ download. See this:
Install Premiere Elements, Photoshop Elements
Or are you asking about some specific procedures?
Mylenium

I have 32 bit iTunes on a 64 bit Windows. Can't install 64 bit because the 32 bit will not uninstall (or run).

I have 32 bit itunes on a 64 bit Windows. Can't install 64 bit itunes because the 32 bit willl not uninstall.

Excellent news.
That one can sometimes hit people if they've used the PC Mover utility to transfer a 32-bit iTunes program onto a 64-bit system. Similar issues can arise if a 32-bit Bonjour or 32-bit AMDS get transfered across to a 64-bit system by PC Mover, so it might pay to keep a weather eye out for that (if you've used PC Mover).

Can 32 bit OBIEE 11.1.1.5 be installed on a 64 bit windows machine?

Similar Messages

Maybe you are looking for