Can 802.1q Tag IP instead of Vlan ID ???

Can 802.1q Tag IP instead of Vlan ID ???
Using 3550 and 4507

Hi! William,
Since 802.1q is used only for L2 purposes, it wouldnt be possible tagging IP with it. It is purely used for transferring info about multiple Vlans over a 'trunked' link.
Hope it helped.
Please rate the post.
Regards,
AbhisheK

Similar Messages

Configure ce interface to accept all frames (regardless of 802.1q tag)?

On Solaris 9,
is it possible to configure a ce interface so it accepts
all Ethernet frames it receives, regardless of the presence,
absence, or value of an 802.1q tag?
I'm trying to run packet sniffing software on a ce interface
(I'm not using the interface for IP). The Ethernet switch
I'm attached to forwards to me copies of traffic from many
different VLANs, via a port mirroring function. Most of
this traffic is tagged with various 802.1q VLAN tags.
Some of this traffic may be untagged.
My difficulty is that since the Sun Gigaswift 'ce' interface
supports 802.1q, if I configure the interface so it
doesn't "do" VLANs (e.g. 'ifconfig ce5 plumb'), the ce interface
discards any incoming frames that have 802.1q tags.
Alternatively, if I configure the ce interface so it "does"
VLANs (e.g. 'ifconfig ce10005 plumb'), I end up having to
configure dozens of logical ce interfaces (one per VLAN) each
of which will only receive frames tagged for one particular VLAN;
I don't end up with an interface that receives all VLAN frames.
I want one logical interface that receives all the frames,
so I can point my sniffing software at it.
There's no problem doing this with a card that doesn't support
802.1q, since that card will happily accept all frames and pass
them up. So I can do this on qfe or bge interfaces. But I need
to do this using interfaces available on a PCI card
(my V880 has several port mirrors coming from various Ethernet switches),
the interfaces need to be 1000 Mbps (which rules out the qfe card), and
I'd like to stay with copper (which rules out the bge card).
That's why I'm trying to do it with the quad ce card, but I'm
stymied by it support for 802.1q. (If there were just some way
I could turn off 802.1q support for specific ce instances.)
Is there a way I can accomplish this with the
copper Gigaswift interface (Cassini driver) in Solaris 9?
If not, is there another 1000 Mbps copper interface (provided on PCI card)
that can do this?
Or does this become possible in Solaris 10?

Oops, when I wrote "bge" above, I meant "ge", of course.
(ge is fiber gigagbit ethernet interface and doesn't know about 802.1q.)

802.1Q Tagging Over SONET

Hi there,
I have two Catalyst 6500 switch with sup2/msfc2 with IOS 12.1.20E Enterprise W/VIP and a PA-POS-OC3SMI card on a FlexWAN module.
We have two sites which are connected over OC3-SONET. Both sites have multiple VLANs and inter-VLAN routing.
Is there any way to configure OC3-SONET like a 802.1Q trunk and transmit 802.1q-tagged packets over OC3-SONET.
I thought, I can use Bridging Control Protocol (BCP), but I could not enable BCP on the POS interface.
I appreciate any help.
Thanks
Alper

is your sonet private line or some sort of metro ethernet services ? Heres a link to creating an 802.1q tunnel. It might help
http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_guide_chapter09186a008007fa06.html

Can I share tags with other users on shared folders?

I have a shared folder that contains research articles. I have been able to set up the shared folder successfully so that 2-3 users can access the folder, add files and delete files. I have also been able to use the "tag" feature which has made it very easy and effective for tagging research articles by multiple categories and for searching for research files by tag/category.
However, what I have found is that the only person who can search by tag is the one who originally tagged the file. Other users of the shared folder cannot search by a tag that another user has created. Is there any way for 2-3 users to share the same tags and be able to edit these tags and search by the same tags? I would prefer that 2-3 people manage this research folder instead of just one.

No. iCloud provides no equivalent of the iDisk; it's designed for syncing calendars, email, bookmarks, contacts, photos a iWork (only, so far) documents between your Mac(s) and iPhone/iPod/iPad. The data is not accessible to anyone else.
For file storage and sharing you will need a third-party solution - this page examines some options:
http://rfwilmut.net/migrate3

I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

Hi Sig,
The issue is that i only want the shared folders to be accessed through windows 7.
Whats the point otherwise to have shared folders?
thanks..

When I click share to Facebook it takes me to my sons Facebook account. How do I add my facebook account so that I can send photos to that instead of my sons!!?

When I click share to Facebook it takes me to my sons Facebook account. How do I add my facebook account so that I can send photos to that instead of my sons!!?

iPhoto Preferences > Accounts > click the little plus in the lower left corner and follow the onscreen instructions.
Cheers

How can I use Tags in Ical. Hope that it works like in finder

Hi I am happy that OS 10.9 is suporting tags. Like to us it in Ical to keep it in sync with my taks used in finder. However I can not find Tag's in Ical and wonder if this is the same als Flag's. Can some help me out to keept it consistent troughout al my applications by using tags

On one of my clips it says:
Format: Apple Intermediate Codec, 1280 x 720, Millions
16-bit integer (Little Endian), Stereo (L R), 48.000 kHz
Current Size: 1280 x 720 pixels (Actual)
Another clip I use says:
Format: Apple Intermediate Codec, 960 x 540, Millions
16-bit integer (Little Endian), Stereo (L R), 48.000 kHz
Current Size: 960 x 540 pixels (Actual)

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

How can I assign a period (instead of B) in Keynote for blank screen so I can use a Logitech R800 presenter? An option in next version?

I have recently bought a Logitech R800 presenter which works very well with Keynote on a MacBook Pro. The start/stop presentation key does not work but that can be easily fixed by assigning F5 to "Start presentation" for Keynote in the keyboard system preferences. The remaining issue is that the blank screen button sends a period (".") which works as a prompt for a blank screen in PowerPoint, but in Keynote it causes the slideshow to end. Keynote uses the letter "B" for blank screen.
How can I assign a period (instead of B) in Keynote for blank screen? Some sort of work around would be very useful as I often use blank screen in my presentations and much prefer Keynote to PowerPoint.
Perhaps it will be an option in next version of Keynote?
Thanks

As far as I know you can not change these keystrokes without changing the Program files. I am sure it is possible there, but I have no idea where to even start to tell you where to find it.
Your best bet it to go to the Keynote Menu>Provide Keynote Feedback and let Apple know you would like the option to change them.

HT204053 I am not able to update my apps because every time I am doing this, it is asking for a password which I have never used and the person who used it is in no more contact. how can i get my id instead of his??

I am not able to update my apps because every time I am doing this, it is asking for a password which I have never used and the person who used it is in no more contact. how can i get my id instead of his??

Apps can only be updated using the same Apple ID and password they were originally purchased with.

I've recently changed my password on my e-mail account and now I can't share i photos instead I get a message The email server didn't recognize your username/password combination. How do I change it in i photo pls

I've recently changed my password on my e-mail account and now I can't share i photos instead I get a message The email server didn’t recognize your username/password combination. How do I change it in i photo pls

I'm trying to email from iPhoto

How can we get tag of XML file using SAX

Hi ,
I'm parsing one SAX parser , I'have almost done this parsing. i have faced problem for one case, i'e how can we get tag from XML file using SAX parser?
XML file is
<DFProperties>
<AccessType>
<Get/>
</AccessType> <Description>
gdhhd
</Description>
<DFFormat>
<chr/>
</DFFormat>
<Scope>
<Permanent/>
</Scope>
<DFTitle>gsgd</DFTitle>
<DFType>
<MIME>text/plain</MIME>
</DFType>
</DFProperties>
I want out like GET and Permanent... means this one tag which is present inside of another tag.
Handler class like
public void startElement(String namespaceURI, String localName,
               String qName, Attributes atts) throws SAXException {
if(_ACCESSTYPE.equals(localName)){
               accessTypeElement=ACCESSTYPE;
public void characters(char[] ch, int start, int length)
               throws SAXException {
if (_ACCESSTYPE.equals(_accessTypeElement)) {
               String strValue = new String(ch, start, length);
               System.out.println("Accestype-----------------------------> " + strValue);
               //System.out.println(" " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
               throws SAXException {
if (_ACCESSTYPE.equals(localName)) {
               _accessTypeElement = "";
. please any body help me

Hi ,
I have one problem,Please help me.
1. How can I'll identify where exactly my Node is ended,means how how can we find corresponding nodename? in partcular place
<Node> .............starttag1
<NodeName>Test</NodeName>
<Node>................starttag2
<nodeName>test1</NodeName>
</Node>..................endtag2
<Node>.....................starttag3
<NodeName><NodeName>
<Node> .........................starttag4
<NodeName>test4</NodeName>
</Node>.......enddtag4
</Node>...........end tag3
</Node>............endtag1
my code is below
private final String _NODENAME = "NodeName";
private final String _NODE = "Node";
private String _nodeElement = "";
     private String _NodeNameElement = "";
public void startElement(String namespaceURI, String localName,
               String qName, Attributes atts) throws SAXException {
if (_NODENAME.equals(localName)) {
               NodeNameElement = NODENAME;
if(_NODE.equals(localName)){
     System.out.println("start");
     if (_NODENAME.equals(localName)) {
               NodeNameElement = NODENAME;
public void characters(char[] ch, int start, int length)
               throws SAXException {
if (_NODENAME.equals(_NodeNameElement)) {
               String strValue = new String(ch, start, length);
               String sttt=strValue;
               System.out.println("NODENAME: ************* " + strValue);
if(_NODE.equals(_nodeElement)){
               if (_NODENAME.equals(_NodeNameElement)) {
                    String strValue = new String(ch, start, length);
                    String sttt=strValue;
                    System.out.println("nodevalue********** " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
               throws SAXException {
if (_NODENAME.equals(localName)) {
               _NodeNameElement = "";
if(_NODE.equals(localName)){
               System.out.println("NODENAME: %%%%%%%%%");
please help me. How can I figure node ending for particular nodename

Tag found instead of tag IDOC BEGIN=

I am doing file to IDOC.
I see this error in SXMB_moni.
Error: MSGGUID 55F5AB4083AC11DDA9030050569C7B40 Tag found instead of tag IDOC BEGIN=
What could be the issue....
Edited by: Harsha reddy on Sep 17, 2008 4:39 AM

Hey
Are you trying to post multiple IDOC's?
If yes,then did you change the IDOC occurrence as 0-unbounded?
Also try to import the IDOC metadata again in IDX2 and run the scenario.
Thanx
Aamir

Help! Can't edit tags, everything is grayed out.

Hey there.
I've recently got a new laptop and my iTunes library is located on an external hard drive. When I try to edit a single song (via "Get Info") I cannot change anything, everything is grayed out. However, it allows me to change the information when I select multiple songs (strange).
I thought it might be due to "read only" files, but they files are not "read only". It says I have full reading and writing permission, I can edit the tags through WinAmp, but why can't I edit tags through iTunes?
Not all the songs are grayed out though, the songs that I've recently ripped I can edit freely in iTunes.
I'm using the latest iTunes version 7.5 and Windows Vista.

The the music folder on the external drive was created on another computer, it is possible that Vista does not regard it as yours and has not granted write permission.
Here is some help on permissions in Vista:
http://windowshelp.microsoft.com/Windows/en-US/Help/2464a180-e5dc-45d1-a2b8-3c8a 2b571e9d1033.mspx
You need to check that your account has full control rights on your music folder.
ANother possiblity although unlikely, is that your music files have somehow been made read only, you can check this by looking at the properties for a problem file.

How can i pass a variable instead of a table name in the Select statement.

Dear all
how can i pass a variable instead of a table name in a select statement ?
Example :-
Begin
P_get_procedure_tname (aap_name,otable_name);--It will take an application name and will return a table name
Select col1 into ocol1
from ---- here i want to pass the variable OTABLE_NAME
End;How can i pass this ?

Hi,
You can use dynamic sql.
EXECUTE IMMEDIATE 'SELECT COL1 INTO ' || OCOL1 || ' FROM " || OTABLE_NAME;
{code}
cheers
VT

Can 802.1q Tag IP instead of Vlan ID ???

Similar Messages

Maybe you are looking for