CAN 8473 Not working with Test Panel in Max
Hello all. I am working with a USB-8473s CAN unit. I have it connected to the bus and can see the can traffic through the bus monitor. So everything is working properly there. I am trying to send a certain message so I set up a message and channel in MAX but when I go to the test panel I get an error saying that the "Test Panel cannot run since no CAN ports are available. Make sure you have at least one NI CAN card inserted into your computer". What is going on? I thought that the USB can unit was the CAN card? I'm on Win XP.
You're not going to like the answer. The 8473 only supports the frame API and not the channel API. No messages in MAX.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/203384 >> specification tab >> API Support
I ran into this same problem.
You'll either have to use the frame API or purchase a different unit that supports the Channel API.
Robert C. Mortensen
Certified LabVIEW Architect
Certified LabVIEW Embedded Systems Developer
Endigit
Similar Messages
-
Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.asHi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ -
MyDAQ fails Self-Test and will not work with any software
I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip 341 KBHi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG 40 KB -
I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?
The sound seems very faint but can here static on playback.
-
Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
DetailsAs a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck? -
Adobe Flash Player does not work with Safari. What can I do?
Hi,
I have a MacBook Pro, Retina, 15 inch, late 2013, 2 GHz Intel Core i7, using OS X 10.9.4. I have installed Adobe Flash Player. In my System Preference, in the advanced settings, it is set to install updates also tells me that I have the NPAPI Plug-in (version 14.0.0.145) installed but not the PPAPI Plug-in. Is this the reason why it does not work with Safari (keeps telling me to download the app, which I did but still does not work)? Is there any way I could fix the problem? Please, help.
Thanks.If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them. -
I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks
I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise. -
Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can not send command via VISA test panel in MAX
Hello all,
I am having a small issue using the VISA test panel in MAX. I am trying to send a simple command to a device and then retrieve the response data. I am able to do this successfully via Labview, but for whatever reason I can not get a good response in MAX. The command that I am sending is simply a letter (address of the device) followed by an end of line character (\r\n in ascii). In MAX, I simply append the \r\n onto the string sent in the buffer (Send End on Writes == FALSE). All serial settings are the same as what I have in LV (19.2, 8-n-1). Does anyone have any thoughts? This is kind of frustrating as I just want to do something simple and don't want to have to build a whole routine in LV to do this.
Cheers, Matt
Matt Richardson
Certified LabVIEW Developer
MSR Consulting, LLC
Solved!
Go to Solution.Thanks, Broken. I am getting a time out error. Clearing the buffers doesn't seem to be making a difference. This is baffling to me. I must be missing something fundamental.
Something that I didn't add before is that I seem to be able to send the command via labview without a read, and then read it via MAX. This must have something to do with way it is sending the command. Arrrrgh!
Matt
Matt Richardson
Certified LabVIEW Developer
MSR Consulting, LLC -
adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
My iPod Touch is not working with Bose SoundDock. How can I fix it?
My iPod Touch is not working with Bose DoundDock Series II. Can anyone suggest how I can get these 2 to work together?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
iPod Touch Repair – iFixit -
I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays -
Firefox 4 will not work with my OSX 10.4.11. I cannot now get back the old version. what can I do?
Just downloaded Firefox 4. It replaced the older version on my mac but will not work with my current version of OSX.
I cannot find where I can download the older version so now I do not have Firefox. Can you help>Perfect! This works!!! Mozilla... remember many Mac users keep machines a looooong time! They are like an old Mercedes. They never die.
Maybe you are looking for
-
I have two children who have shared an Apple ID for the iPod Touches. The older is now getting an iPhone and is old enough to manage his own ID. My question is, if we set him up with a completely new Apple ID, will he be able to sync the phone with
-
i bought a brand new nokia lumia 610,but its connection to internet is by chance despite 3G net work availability.the Nokia C5 003 i owned connects in a split of a second to internet with google.i thought i would enjoy browsing with this new gadget .
-
Dynamic message using message pool
Hi all, I want to print the number of rows in the message using message manager. any pointers regarding same will be highly appreciated. thanks and regards anand
-
Hi, We have currently built web applications which are in complience with OSGI and runs on FUSE ESB. Recently we have gone through vFabric tc server which is based on open source Apache tomcat. Is there any other server from vmware which supp
-
Abt char to numeric conversion
There is a field named bcode in data base that is of char length 3 , i want 1 to 10 insert in dat field, is it possible , i know yes , so tell me dat field is behaving like character when i m selecting values from selection screen , what i want when