Can a 2G ipod shuffle be connected with a 3G ipod shuffle cable?

I've misplaced my 2G ipod shuffle cable. Can I connect and charge my 2G shuffle with a 3G ipod shuffle cable? I've tried and nothing happens, so I'm not sure if 2G shuffle is dead or I need the correct cable.
Any suggestions?

Big_EP wrote:
Are you saying that it won't work? The battery in my iPod may be bad. I don't want to buy a new cable if my iPod battery is shot.
To be clear: You can NOT use a 3rd Gen shuffle cable with a 2nd Gen shuffle.

Similar Messages

  • My old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod

    my old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod

    Try these 2 User Tips...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991

  • I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

    why doesnt my 5th gen ipod nano not connect with windows 8?

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Why can´t i use face time call with on my ipod touch with ios6

    Why can´t i use face time call with on my ipod touch with ios6

    iTech, First change your apple password, than go to 'setting' and than click on 'Facetime' and make sure your facetime email is right than retry. Also calling apple support can help you or the best way is to go down to the apple store for direct help. I really hope that what i have told you have helped and try to reset your iphone.
          iTech Support Team

  • NetBean, I can't establish the oracle database connection with version 9i.

    In NetBean, I can't establish the oracle database connection with version 9i.
    I have create the datasource and it is fine.
    when i try to access the tables i get a message
    "Unable to refresh children, connection is broken, unsupported feature"
    in netbeans.
    Does netbeans support oracle 9i version.
    Thanks,
    VKK

    In NetBean, I can't establish the oracle database connection with version 9i.
    I have create the datasource and it is fine.
    when i try to access the tables i get a message
    "Unable to refresh children, connection is broken, unsupported feature"
    in netbeans.
    Does netbeans support oracle 9i version.
    Thanks,
    VKK

  • How can my iPad and desktop Mac connect with FaceTime if they are both associated with the same email account?

    I hace an IPad2 and a desktop Mac --I am on Lion and in the cloud.  Both devices share the same email account.  How can I use the iPad to connect with the Mac through facetime if I am travelling?

    You need to associate another email address to one of the devices. Read about it here.
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Use-FaceTime-On-The-iPad_2.htm

  • If I enable iTunes match on my PC, will I still be able to synch my old iPod which only connects with a cable

    If I enable iTunes match on my PC, will I still be able to synch my old iPod which only connects with a cable

    Yes.

  • I have a PowerPC G4 w/OSX 10.4.11 and a HP laserjet 4 connected with a USB to parallel cable,  I cannot get it to print, how do I fix it ?

    I have a PowerPC G4 w/OSX 10.4.11 and a HP laserjet 4 connected with a USB to parallel cable,  I cannot get it to print, how do I fix it ?

    This forum is for questions about Apple Remote Desktop, Apple's software for managing networked Macs. You'll be more likely to get help with this question if you ask it in the Mac OS X 10.4 forum:
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger
    Regards.

  • Will a ipod nano charger work with a new ipod touch?

    will a ipod nano charger work with a new ipod touch?

    If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

  • Can I use my Ipod Mini A1070 charger with the 4th gen Shuffle?

    I have the old Ipod Mini which came with the A1070 charger.  Would this charger be OK with the 4th generation (current) Shuffle?
    The connections all fit properly but I was concerned about the compatibility between how much power was going into the device from the AC outlet.
    Thanks.

    Thanks for the response.  Just got the Shuffle home and the Ipod Mini charger is not compatible.  The connections don't fit.  The connections do fit on my I-Pad charger and I've heard stories going both ways that it will work and it won't work.

  • Ipod touch shows connection with home computer but can't access internet

    Just got ipod touch...and can't connect to internet on home computer.  Wifi is on and it shows connection to my home computer but I can access the internet.

    What iP address is shown on the iPod for network connection?  If it starts with 169 you are not connected to the network, the 169 IP is assigned by the iPod and not obtained form the router.
    I would try:
    - powering off and then back on yur router.
    - Reseting network settings on the iPod: Settings>General>Reset>Reset Network Settings.
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Why can't I get my iPod touch to connect with my wifi?

    I am unable to get my iPod touch to connect to my wifi even though I've verified the password is correct.   Can anyone help?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • 3rd gen iPod won't connect with firewire...how can I restore it?

    As many others have had this problem, my iPod only charges when connected with firewire. When I connect with USB, it says "Use the iPod Software Updater application to restore the iPod to factory settings"
    When I try the iPod Software Updater, it says I need to connect via Firewire.
    Question 1: Any ideas on how to restore the iPod?
    Question 2: Any ideas on how to get the firewire functional again?
    Many thanks in advance

    Answer to Question 1: - I connected the iPod with the USB, went to Disk Utility and erased the iPod. Now the iPod works with USB.
    Question 2 is still unanswered. Ideas?

  • IPod still not connecting with windows

    I recently got a replacement iPod from Apple. I connected my iPod with my computer and the "Do not disconnect." sign shows up instantly. It was there for over 20 hours so I disconnected it. I checked out the 5 step guide for Windows to recognize the iPod, but it still doesn't work. I'm using the exact same cable and USB port that I used on my old iPod. The iPod is not recognized by my PC or by iTunes. When using the iPod updater, the only option available is "restore" and I already tried that. Whenever I connect my iPod to Windows, it always says "USB device not recognized." and the iPod always goes to the "Do not disconnect." screen. Can anyone help me?

    I have a similar problem, excpet that my ipod just stopped being recognised by itunes, although Windows Exploere recognises it. When I run the updater, it keeps telling me to plug in my ipod (even when it is plugged it) and both the update and restore buttons are greyed out.
    No hardware has been installed since the ipod was last working properly.
    I've tried everything suggested at the website... I've reset the ipod, installed, uninstalled and reinstalled the latest versions of updater and itunes repeatedly, performed restarts running only the ipod drivers using system config, nothing works. I've tried the ipod on both firewire and USB2 connections with the same result - Windows Explorer sees the ipod, but not itunes or ipod updater.
    I figure the ipod needs to be restored to its factory settings, but how do I do this if the software to do so won't recognise the ipod? Is there a hardware option to do a complete restore/reset?

Maybe you are looking for