Can a A945US laptop with Vista have a solid state drive installed?
It doesn't appear many questions get answers around here... I can forsee driver problems...
Hi:
Many times questions don't get answers because people just don't know. No one is deliberately ignoring you.
There are hundreds of HP notebooks out there, and unless someone has actually installed (or attempted to install) a SSD in that particular model, all we can do is speculate.
I will offer you my opinion. That is all I can do, since I do not own your model notebook and I have never installed a SSD in any notebook or desktop PC.
Let's start with the manual...
http://h10032.www1.hp.com/ctg/Manual/c01295803.pdf
Chapter 3, page 21 lists the supported drives for your notebook series. No SSD's are listed as optional drives.
Let's take a look at your PC's architecture...
Your notebook either has the GM965 or the GL960 chipset. I can't say for sure since I am not quite sure if the T2390 works with just the GM965 or the GL960 or both.
You can run the Intel chipset ID utility to find out what chipset you have.
http://www.intel.com/support/chipsets/inf/sb/CS-009266.htm
If you have the GM965 chipset, theoretically, it should.
You can see if your notebook is listed in this Crucial site as supported for an SSD
http://www.crucial.com/uk/store/ssd.aspx
And according to the site, a SSD is supported.
http://www.crucial.com/uk/store/listparts.aspx?model=Presario%20a900%20Series&Cat=SSD
I just happened upon the Crucial UK site. I'm sure the crucial US site has the same search engine.
Hope this helps,
Paul
Similar Messages
-
My MacBook Pro just had a new memory and solid state drive installed. Since the installation, the Lightroom tools are now all grey. Even the color sliders are grey. Please help!
My guess is that your operating system got updated to Mavericks and that you are running an old version of Lightroom:
Sliders are white, look different | Mac OS X 10.9 Mavericks
Be aware of a Lightroom bug with color management in mavericks that makes shadows too deep in the Develop module: Jao's photo blog: Serious color management bug in Mac OS 10.9 "Mavericks" and Jao's photo blog: Further quantification of the Mavericks color management problem. -
I own a Mac book Pro 13" it has a 250 gb solid state drive and I would like to put a larger one in is this possible.
You don't need to partition your drive to run Fusion, only if you want to run Bootcamp.
If you have space on your Windows partition, I would suggest you backup your Windows partition, and then, delete the partition using Disk Utility.
You can now restore your virtual machine to a single volume or repartition if you prefer.
I would consider upgrading to a unibody MBP (used, refurbished will do) just to be able to access the HD. Opening the pre-unibody MBP is not something you would want to do. -
How do I know if I have a Solid State Drive?
Where do I look to figure out if I have an SSD or a HDD?
then look under "Serial-ATA"
Select your Boot Drive. Under Medium Type it will say "Solid State" or "Rotational" -
Can I replace my 250Gb SATA HD in my 2008 aluminum MacBook with a new SATA3 Solid State Drive?
I would like to replace my 250Gb SATA HD in my 2008 aluminum MacBook with a 500Gb SATA3 SSD. I want to do it because of the age and to increase capacity, access speed and reliability. Is SATA3 backwards compatible to SATA? Should I save some money and just stick to a regular SATA higher capacity HD and forget about a SSD?
I replaced the hard drive in my early 2009 model with a Samsung 840 ssd. My book has the same sata interface as yours and accepted the newer drive without a hitch. It's the best $160 I've ever spent on a computer upgrade. My macbook feels like a new machine. I would highly recommend it.
-
Do I have a solid state drive for Hp Envy DV7 7273ca notebook?
I have an hp envy dv7 7273CA Windows 8.1 notebook and i was wondering becuse the box said it came with a ssd i dont have the box anymore
I have three drives os c: Recovery d: and data e: I was wondering if data e is the ssd its 29.6 gigs.
when i go to properties they all say the same thing local disk ntfs. when i go to properties than hardware i see 2 drives besisdes my dvd drive one is a samsung and the other is a WDC WD10 bunch of numbers and letters. PLEASE HELP this is rather annoying trying to figure out thx.xanadu_poppy
i mean 29.6 gigs MLC, normal is the Recovery on the MLC, i don't mean your samsung SSD
normal is dual hard drive configurations with out 1.8" mlc drive
Page 73 http://h10032.www1.hp.com/ctg/Manual/c03591253.pdf
new Intel Rapid Storage Technology driver
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. -
X200 SSD (Solid State Drive) with clean-install of Vista or XP?
Hi all,
I apologize for starting a new thread on a new forum; however, I am running out of research time.
I am about to buy a X200 with the 64GB SSD (Solid State Drive) (and it needs to be bought by tomorrow Can I ask couple questions? :
1) I am legally using this for business purposes with an MSDN license, so I can and will install any clean OS immediately. With the option to install any Windows OS; which will work best [or at all] with the SSD? (I have read conflicting articles, but most are outdated due to SSD's being so new.)
2) With only the SSD and without a MediaBase, I read several guides such as This Thread on this Forum on how "fun" a clean install can be...are there any extra difficulties with the SSD?
I am a software engineer and would normally piece this together my research; however, I am running out of time before I have to decide if the SSD is a viable and installable option at this time (and if I should buy it!)
Thanks a lot!
MikeYHello to all.
I'd like to know why AHCI mode is being suggested to use for SSD's? Please tell me why. I just don't understand. I think using Raid 0 Array would be the better choice. How does AHCI mode vary compaired to Raid 0 ? Is AHCI a better Mode? Does it give better performance then Raid 0?
I see alot of you are having problems setting up SSD's. I have read the first thing you need to do is make sure the firmware on any SSD you use should be updated.
I also see a lot of people here talking about the need to install Raid drivers. This is true with all other OS's, but I have found that after a fresh format, even on a new HD, I just installed Win 7 64 bit ultimate I went right into device manager to see what drivers are needed, & to my surprise all the drivers were already installed, including Raid driver & controller. I set up my Raid 0 Array at the F10 prompt, rebooted with OS disk with master drive after setting up boot sequence, & continued from there no problem with 2 150GB Raptor HD's in Raid 0.
I have gone as far as to use a Western Digital HD CD utility disc that has a write zero utility & used it to fast write zero's to the first 63 tracks & sectors including track 0 sector 0 where the MBR is written, & I've reformatted & reinstalled Win 7 from that point, & all the drivers still get auto installed. You can go right into device manager & see for your self. The only driver I ever need my be a sound driver update & Graphics driver. I'm not forgetting that the drivers that are auto installed are generic & may need updating, but what I'm saying is, I haven't seen any yellow question marks or exclamation points in device manager like you do with other OS's before Win 7. -
Have Linksys WRT54GS Got a new laptop with vista having problems
I have been using this wireless router for a while works great. I got my wife a new laptop with vista can conect with limited conectivity (excelent signal). Can not use any online programs. How do i fix this problem?
"limited connectivity" ca be due to incorrect n/w key u r typing.
if u have an securtiy enabled conection, when u r trying to connect on vista laptop, plz type the correct n/w key.if there is any confusion oen setup page and chck the ifo from there.
if this doesn't work, u mght have to upgrade f/w of WRT54GS from www.linksys.com as win vista sometimes requires the latest f/e and drivers to connect properly -
Airport express interference when my other new dell laptop with Vista
Hi,
My macbook was working great with airport express. Once I bought the new dell laptop with Vista it stopped connecting to airport whenever the Dell is on. Once I switch the Dell off, my macbook immediately connects with airport. The Dell never has any prob trying to connect. I've tried to change the channel but it doesn't help as my Dell is unable to connect. My radio mode is 802.11n ( which is b/g compatible) as I can't use any other mode since my Dell won't pick up other mode. Please help .
Thanks
PralavThank you . I do have my Real player running. I turned it off and restarted and I still have interference from the dell laptop. My MB connect AE only when the dell is off. If start it my MB looses AE. The realy player doesn't seem to make any difference.
Thanks -
Trying to update iTunes on a laptop with Vista.
A friend is trying to update iTunes on a laptop with Vista. She gets this: Error writing to file: C:\Config.Msi.\78efb0.rbf. Verify that you have access to that directory.
I thought maybe it was an issue with Administrator privileges, but she's the only user on the computer. The file does not already exist in the root directory. (I was thinking of deleting it.) I googled it and got nothing. Any ideas?
Thanks.No problem.
If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
http://www.apple.com/itunes/download/
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Any better luck with the security software shut down? -
I have an HP LaserJet 1160Le with wired connection to a Dell laptop with Vista OS. The driver I have will not allow me to print more than one page at a time from most software programs I use including MS Word, Adobe Reader9, WordPerfect, and Photoshop Elements 9.
No driver update seems to be available on HP website. Please advise.According to this Apple article, a driver for your HP LJ 3800 is available from Apple. So what should happen is when you add the printer to the Mac, the supporting driver should be downloaded from Apple and installed.
Is the printer being connected to the Mac via USB cable or is it networked? -
Is there a conflict in crossing over files from HP Pavilion laptop with Vista to Toshiba NB205-N210 with XP? Is Bluetooth necessary (or useful) on a Toshiba? I have Bluetooth on my Hp Pavilion.
A crossover network cable is one that is designed to connect two computers to each other through the LAN port without using a router. It sounds like you don't have any sort of home network to work from or have any experience in networking. Instead of wasting a lot of time posting methods that you might not be able to use why don't you start by telling us what networking methods you have available, if any.
Also, do you have an external USB hard drive? That might be easier to use for this.
Lastly, how much data are we talking about? That would have a large bearing on how we should go about this.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time. -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Solid State Drive Upgrade Kit v300a with Windows 8.1 on Envy laptop
I am trying to install the Solid State Drive Upgrade Kit V300a in my new HP Envy with Windows 8.1. This upgrade was listed as an option for this model and was bought with the machine.
The doc lists OS supported, but Windows 8 is not in the list. Is Windows 8 supported?
The included disk labled "Arconis" includes ATIHO user guide pdfs and an HP-Drive-Install-Guide-1.15.13-327pm pdf. The install guide mentions using Arconis. The Arconis user guide says to run "setup" to install Acronis but there is no setup file on the disk. I have chosen the setting to display hidden files and there is nothing on the disk but pdfs. The v300a box claims that it includes Acronis Cloning Software.
How do I install this HP upgrade on my new HP laptop?When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
YES, Windows 8 and 8.1 should be supported.
Please refer to this "HP SSD Upgrade Kit Installation Guide" for instructions on setting-up the HP SSD Upgrade Kit and cloning your factory installed hard drive. Please read the guide carefully and in its entirety. Next, assembly the SSD drive and the drive enclosure, per the instructions on page 9. Now, carefully follow the cloning instructions from page 9 to page 26.
Per the instructions, the cloning software should be on the included CD/DVD and it may be a bootable disc. However, if you are unable to locate the required software, please see www.HPSupport.pny.com to register your product and download any needed software.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Hi:
Can I use a solid state drive (SSD) with a G4 1 GHz powerbook? If so, how do I do it? Thanks.
fromx001fromx001 I believe you can use a SSD as internal drive, of course make sure to buy an ide/ata. There are all sorts of sizes up to 480 GB also in the ide/ata standard. You should however research carefully your purchase, as the performances of your SSD are going to have to rely on firmware "garbage collection", as the older operating systems haven't been written with SSD in mind.
Mac Man JW: some people depend on Classic as a brody said, other people need a phone modem from time to time, other people use the laptop in harsh environments, and at -15C and below, LCD screens easily crack and break; NOT the powerbook which has hot air towards the screen (and it's a machine that heats quite a lot). My alu Powerbook 12", which was *not* treated with velvet gloves, only once had a cracked screen: a cleaning lady had stepped over it (!!!!) no joke. And in normal / light use today, it is still pretty decent and usable.
Maybe you are looking for
-
How to create a properties file for DB connection (BPEL async processes)
Hi, In BPEL asynchronouns Project, I am trying to create the Database connection. Instead of hardcoding the details, I want to put it in the properties file and then import the connection file in order to create a connection. I am very new to BPEL an
-
Email Alerts for Items in a List
I have a List that contains Items that are worked on by multiple users. I would like to set up an Alert, or a Workflow in SharePoint Designer, that allows a user who is changing the Item to trigger an email to a user (or users) of their choice, and I
-
Mac mini - 649 days to go for back up to complete!!
Hi I've had my new Mac mini for 1 week now and have still yet to complete a back up to my reformatted external hard drive. The back up shows to be in progress, but states there is approximately 649 days to go to complete back up. It would be quicker
-
How to Stop Auto assignment of Source of Supply in SC
Hi All; We are using SRM7 classic scenario. While creating a SC, the system automatically assigns a vendor in the source of supply if there is 1 contract or 1 inforecord.If there are multiple, the system will not assign but it will show them all so
-
Most of the time it's just an annoyance, but if I'm on my banking page, it knocks me off?!