Can a BIOS upgrade allow NCQ to be enabled on K8N Neo 2P?

My new hard drive happens to have NCQ capablity, though I didn't buy it for that reason (Maxtor DiamondMax 10).
Is it possible that a future BIOS upgrade would allow nForce 3 mb's to take advantage of NCQ?
I suspect the answer is no, but would just like to hear from someone who knows for sure.

ok then you lucky person, are you using nvidia ide drivers or windows ones, cos if you read it properly i say that windows drivers are fine just not nvidia ide drivers, and you may have diff firmware in your maxtor,, whatever, my 300 gig 16meg died in the msi k8n neo, as did the pata version 250 gig, 2 drives, with 16 meg cache ncq, yet the maxtor 200 gig non ncq drive 8 meg cache is fine in this mobo, as is the hitachi 250 sata drive, this is just using windows drivers.
Hope it keeps working for you which ever way, and ooh do a sear\ch and see how many other people are having trouble with this, and yet you send an email to msi about this and they say they have never heard of anyone having this kind of trouble,.

Similar Messages

I have an iMac 5,1 with an Intel Core 2 Duo. I'd like to be able to use iCloud, but need Lion which is too big. How much memory can I add? And will this upgrade allow me to install Lion?

I have an iMac 5,1 with an Intel Core 2 Duo. I'd like to Lion, in order to use iCloud, but the specs indicate I don't have enough memory. How much memory can I add? And will this upgrade allow me to install Lion?

I believe your model iMac can address 3 GB RAM; the minimum for Lion is 2 GB - however, that is an absolute minimum for very light use. You would be much happier with a minimum of 4 GB.
http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-20-inch-sp ecs.html
(You can install 4 GB, but it will only be able to address about 3.1 - 3.2 GB)

HT2404 My iphone 3gs recently stopped allowing me to use certain apps and refuses downloads of other apps, saying all require ios 5. No software update button appears in settings.Can I update/upgrade my 3gs to ios 5?

My iphone 3gs recently stopped allowing me to use certain apps and refuses downloads of other apps, saying all require ios 5. No software update button appears in settings.Can I update/upgrade my 3gs to ios 5?

iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPhone to the computer, open iTunes. Then select the iPhone under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

How can I Install BIOS Upgrade without windows installed

Hi Guys,
I want to Install BIOS Upgrade for Lenovo 3000 N100. The problem is i have a brand new hard drive, so i want to install it on command line after booting the system from bootable CD.
I have found all the BIOS updates on Lenovo site are Installer Packeges which runs on windows.
I am stuck, any help will be highly appreciated.
Cheers,
Ashik

I am Trying to update the BIOS on my G530-35U to 6get18ww (currently 6get17ww). I did not automatically install when I run the file 6get18ww, maybe because I did not have the battery in place (I forgot) all it did was to put all it's 17 files (BIOS.wph, mfc42.dll, ... winphlash.gid, etc.) in C:\DRIVERS\BIOS\6get18ww.
Are those files the ones you are talking about it?
Actually I will copy all but those txt files into a CD and I will try to boot from it.
otherwise I will just copy large size executable file BIOS.WPH other?
I will report here if I don't forget.
thanks

Bios upgrade to enable Vt-d

Hi Svet,
I purchased my laptop from an OEM (Cyberpower) I believe it would be the same model as the GT70 0ND I had recently flashed the Bios using the HP usb tool formatted using FAT 32 DOS system files and it did flash fine, but did not upgrade the BIOS to allow me to enable Vt-d ( I want to be able to run VMware). I am reading the posts in this forum and I have seen a couple others that have upgraded to a custom fix and wanted to make sure that the upgrade will allow me to use VM ware.
Thanks for your Help
John
Mainboard: MS-1762
PCB Version: REV:1.0 Intel(R) Processor Identification Utility
Version: 4.50.20120413
Time Stamp: 2012/08/16 15:10:57
Operating System: 6.1-7601-Service Pack 1
Number of processors in system: 1
Current processor: #1
Active cores per processor: 4
Disabled cores per processor: 0
Processor Name: Intel(R) Core(TM) i7-3920XM Extreme Edition CPU @ 2.90GHz
Type: 0
Family: 6
Model: 3A
Stepping: 9
Revision: 12
Maximum CPUID Level: D
L1 Instruction Cache: 4 x 32 KB
L1 Data Cache: 4 x 32 KB
L2 Cache: 4 x 256 KB
L3 Cache: 8 MB
Packaging: µPGA/BGA
Enhanced Intel SpeedStep(R) Technology: Yes
MMX(TM): Yes
Intel(R) SSE: Yes
Intel(R) SSE2: Yes
Intel(R) SSE3: Yes
Intel(R) SSE4: Yes
Intel(R) AES-NI: Yes
Intel(R) AVX: Yes
Enhanced Halt State: Yes
Execute Disable Bit: Yes
Intel(R) Hyper-Threading Technology: Yes
Intel(R) 64 Architecture: Yes
Intel(R) Virtualization Technology: No
Intel(R) VT-x with Extended Page Tables: No
System Graphics: Intel(R) HD Graphics 4000
Expected Processor Frequency: 2.90 GHz
Reported Processor Frequency: 3.59 GHz
Expected System Bus Frequency: 100 MHz
Reported System Bus Frequency: 100 MHz
BIOS Version: E1762IMS.10M
BIOS Date: 7/6/2012
EC-FW Version:

Hi Svet thanks for your quick reply,
Maybe I had not fully explained the issue here is the short version:
I made a vmdk image from my local machine and when I try to run the image I receive this error message, I believe it has to do with the VT-x flag being present but not enabled (long mode)
This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible.
This host is VT-capable, but VT is disabled.
VT might be disabled if it has been disabled in the BIOS settings or the host has not been power-cycled since changing this setting.
(1) Verify that the BIOS settings enable VT and disable 'trusted execution.'
(2) Power-cycle the host if either of these BIOS settings have been changed.
(3) Power-cycle the host if you have not done so since installing VMware Workstation.
(4) Update the host's BIOS to the latest version.
Also I had a couple other issues 1) when I try to flash the EC I receive a message saying that there is a Product code mismatch? maybe that is normal because I am using an OEM product?
2) does the GPU video overclock tool support 64 bit OS's It doesn't seem to be working on this system I have the Geforce GTX 670M
This is from VMware website for VM workstation 8.0 which is what I am using
When you install Workstation, the installer performs checks to make sure the host system has a processor that meets the following requirements. You cannot install Workstation if the host system does not meet these requirements.
•64-bit x86 CPU
•LAHF/SAHF support in long mode
You can use CPU-Z or a similar utility to determine if the host system CPU is 64-bit capable. CPU-Z shows EM64T (Intel) or AMD64 (AMD) if the processor is 64-bit capable.
If you plan to install a 64-bit guest operating system in a virtual machine, the host system must have one of the following processors. Workstation will not allow you to install a 64-bit guest operating system if the host system does not have one of these processors.
•AMD CPU that has segment-limit support in long mode.
•Intel CPU that has VT-x support. VT-x support must be enabled in the host system BIOS. The BIOS settings that must be enabled for VT-x support vary depending on the system vendor. See VMware KB article 1003944 for information on how to determine if VT-x support is enabled.
Thanks for your help

Bios upgrade for Satellite 1900-303

I have a Satellite laptop 1900-303.
I have downloaded Bios upgrade bios-20071126165418 but when i run the Check.exe it informs me it is the wrong upgrade.
But the text files in the upgrade include 1900-303.
Is there a different Satellite model to the Satellite 1900-303 called simply 1900-303 or is this the correct Bios, please help.

CDROM of my laptop is failing to read from CDs now days and current i want to install new Operating system due to this i decided to use external drive to overcome the problem, but this laptop also fail to boot from external usb connected CDROM and there is no option to set in bios setup to boot from other devices or to external device. From this problem i decided to look for upper version of Bios to upgrade the current one may be it will be able to boot from external drive.
From this situation and my decision can any one tell me if i used wrong or right decision to do this and why so please i need your assistance please.
Your advice is very important to me because i don't hav enough money to by new computer or to order cdrom for this machine and i need to make it working so that i can use for my schooling activity.

Help Please - X200 will not boot after Bios Upgrade - keeps asking for power on password

Hi there,
I am new to this forum and please let me say a big Thank You for your help in advance.
I am using a lenovo thinkpad x200 running windows vista with service pack 1.
The laptop has always been running fine and has never given me any issues. Unfortunately, all this came to an end yesterday when I ran the system assistant which did a round of updates and it prompted me to reflash my bios.
I did what was instructed and closed all open applications and after the laptop restarted, there was a noise from the harddisk (the sound was basically like what happens if the harddisk suddenly loses power). Then, all i got was a black screen, no harddisk acitvity with only the power cable LED and another LED (with the shape of a N tiled at 20 degrees) on.
I searched the forum and did what was suggested in this entry: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...
This is what I did so far"
I turned off the power, took out the backup battery and waited for about 30 minutes (repeated this step several times, also removing the harddisk) but to no avail.
I removed the RAM and tried booting and there was that characteristic beeping sound.
I replaced the RAM, redid the CMOS clearing, and now there is the Lenovo startup screen. However, there would be an error code 0271 (no date time) and 0251 (something about default configuration). Then, these disappear and all I am left with is the Bios Power On password prompt. Somehow no matter what I type nothing can be input into the field (and I did not create any password as far as I can remember).
I redid the clearing for the power on password by removing the backup battery as suggested at the bottom of this page http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-59377 but it is no use. Each time I restart, even if I press the blue Think Vantage button or F1 or F11, I still get the same 0271 and 0251 error messages and am left with the power on password prompt.
I am really desperate as I really like my lenovo x200 and there is important data on the laptop. I would appreciate any suggestions on how I can solve this. Its amazing how a simple update can turn into such a disaster. Now i know i should never upgrade or update my Bios (or at least proceed with extreme caution).
Anyone can provide some help to get my laptop workin again?
Thank you very much,
Mark

try reflashing your bios?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-70348
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

No sound on K8N Neo after upgrading to BIOS 1.9

Hi,
I cannot get the internal sound to work through the digital outputs (SPDIF or optical) after upgrading to BIOS 1.9. The analog aoutputs work fine as did the digital prior to upgrading to 1.9 (don't remember exactly but I think I had 1.7 before).
I have connected my speakers (with internal DA converters) with both SPDIF and optical cables.
I have tried every combination of speaker settings and outputs in the Realtek audio manager to no avail.
As a sidenote my other, external, soundcard (M-box MobilePre works fine) connected to my speakers.
The mobo is a K8n Neo (7030) and audio drivers latest Realtek AC97.
What can I do?
Regards,
Henkan

Henkan,
Welcome to our forum.
What method did you use to update to v1.9?
From what you posted the BIOS update caused your sound problem, so you need to either re-flash BIOS 1.9 or go back to the previous one that worked for you.
Read these thread about flashing BIOS:
1- using WINflash https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
2- using DOS https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
DO NOT USE LIVE UPDATE - DO NOT USE LIVE UPDATE
Good luck,

G50-30 System is unstable after BIOS upgrade

After installing Windows 7 I decided to upgrade BIOS and picked the proposed update for Windows 7 64bit (http://support.lenovo.com/uu/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-30-notebook-lenovo).
After applying the upgrade system boot failed. This issue was fixed using yapha7's advice (see this thread: https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-G50-30-Bios-update-crashed-installed-win-7/m-p/1693051#M32265).
Well, OS boots. But now I can draw violet lines on a viewport by pressing two mouse buttons simultaneously. WLAN breaks periodically, gets fixed by a reconnection. CPU consumption increases without any resorce-intensive task being launched. It iss understood that latter two issues might not be related to a BIOS upgrade. But they all appeared shortly after the upgrade.
Also it is not clear if I'm able to use USB 3.0?
The current BIOS version is A7CN47WW. Is it possible to rollback? Can you provide the original / any stable BIOS version (for Lenovo G50-30 Windows 7 x64) which is prior to the one available at the drivers download page? Thank you!

hi a_demenkov,
Just to check, have you considered reinstalling Win7 after you got the issues that you described after flashing the BIOs to v47?
If you're leaning towards downgrading to the BIOS to v45, try the following:
1. Boot into the BIOs and enable BIOS Back Flash.
- Sample image
2. The BIOS v45 download link is not listed but if you look at the the BIOS v47 file below, you should be able to get v45 by renaming:
BIOS v47
https://download.lenovo.com/consumer/mobiles/a7cn47ww_64.exe
to
BIOS v45
https://download.lenovo.com/consumer/mobiles/a7cn45ww_64.exe
If you're not able to flash the BIOS inside Windows then you may need to do it under DOS.
How to flash InsydeH2O EFI under DOS enviroment
Goodluck!

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

VGA BIOS Upgrade

Hi,
i have a MSI 7800GTX installed in a Windows X86_64 machine and would like to know how I can update the cards BIOS as the update software does not work on this platform ?
TIA

To add... MSI's Live update software probably doesn't have an update for that card since it is so new. Cards are not like motherboards. And nVidia usually get's it right the first time around. I believe MSI stuck to the reference design. In fact, it may very well be that card is likely manufactured for nVidia by contract manufacturers, then sent to MSI. This is very common with initial releases to maintain a high level of quality control.
The only reason (in this case) someone would want to mess with BIOS upgrades or modded BIOS's, is to try to get more performance out of it. If you don't know EXACTLY what you are doing, you CAN render your investment useless. And there are no serious bugs that I am aware of. As Stu mentions, in the case of a specific issue, or functionality, there would be something, however, this seems like a pretty successeful release for a change.

Why can't I upgrade from 10.5.8 to 10.6? My MPB spits out the disc before it ever appears on the desktop.

Why can't I upgrade from 10.5.8 to 10.6.3? My MPB spits out the disk before it ever appears on the desktop. The Snow Leopard disk is brand new, was still in shrink wrap until I opened it. I do have the hard drive partitioned, running Win XP with Boot Camp, if that might be the issue.

Hey vlntrg,
I have a 2002 model Powerbook that will sometimes (most of the time) refuse to mount a CD or DVD. It just grunts for a while and then spits it back out. When this happens, I will slap the bottom of the machine several times with an open hand, not too hard and not too soft. I read this somewhere online (I forget where), and I was hesitant to try it, but it was cheaper than replacing the SuperDrive.
This will often allow me to insert and use the CD or DVD. I have also noticed that I have less trouble when the machine is cold than when it's warm.
I've not had this trouble with my MacBook Pro.
Another thought. Would it be possible to boot your machine in target disk mode and update your software using a friend's Mac? I'm sure there are others here who can better answer that question.
Hope this helps.
Andy

I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?

I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?

Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may
apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.

Satellite A210-16G - Where to find a Bios upgrade

is there any bios upgrade for this model? i can't seem to find it
i'm running WinXP Pro SP3. I hope this might solve ati2dvag infinite loop problem...

Hi
As Im not mistaken the Satellite A210-16G belongs to the PSAELE series which appears on the Toshiba European driver page.
At this time the BIOS v2.0 is available for this machine.
Greets

Tp I series 2621-42U bios upgrade

it seems that my floppy drive has flopped on this unit, is there a way to bios upgrade via cdrom?
thanks in advance
itconx

miradiem, welcome to the forum,
just replace the CMOS (Backup Battery), how to instructions can be found in the Hardware Maintainance Manual. Replacing it will stop it producing the error messages.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Can a BIOS upgrade allow NCQ to be enabled on K8N Neo 2P?

Similar Messages

Maybe you are looking for