Can a block in Oracle contain rows/data from multiple tables?

Hi during my discussion with one of the DBAs, a point came up i.e. A block shouldn't have rows from multiple tables...
Is that true? I read in one of the OTN thread (i don't exactly remember the thread name) that a block can have data from multiple tables. If it doesn't have, what's the table directory in block signifies?
Please share your views.
Thanks,
CSM

CSM.DBA wrote:
Hi,
As per the above link,
Table directory
For a heap-organized table, this directory contains metadata about tables whose rows are stored in this block. Multiple tables can store rows in the same block. (Logical Storage Structures)
And by default Oracle creates heap organized tables only.(heap-organized table: A table in which the data rows are stored in no particular order on disk. By default, CREATE TABLE creates a heap-organized table.) (Glossary)
So I can say a block can contain rows from multiple tables. Isn't it?
CSM
See Logical Storage Structures
Given: A segment is a set of extents allocated for a specific database object, such as a table.
Given: An extent is a set of logically contiguous data blocks

Similar Messages

JDBC-XI-FILE scenario. How to extract data from multiple tables

Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
Kumar

Hi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke

Displaying data from multiple table/column

hello ..
anybody can help me how to diplaying data from multiple table/ column in PHP. TQ

Follow the "How do I SELECT, INSERT, UPDATE and DELETE data from PHP?" example from http://wiki.oracle.com/page/PHP+Oracle+FAQ and change the "select ..." query to your favourite join, e.g.
select country_name, region_name from countries, regions where countries.region_id = regions.region_id;

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

Does ODI has ability to extract data from multiple tables

We have requirement using ODI to extract data from multiple tables depending on certain logic and spool 100+ files.
How efficient ODI is in data extraction from several multiple tables especially when the extraction is dependent on certain business logic conditions ? Also, if anyone used Peoplesoft Application Engine process to extract volumes of data, how efficient Peoplesoft Applicaiton Engine process is as compared to ODI ? I will really appreciate if someone throws some light on this ? Thanks in advance.
Ram

One more option
Create two Integration Interfaces and launch them sequentially:
1st Interface : select a IKM ... Append and activate the Distinct rows check box.
2nd Interface : select an IKM ... Incremental Update and set the UPDATE option to No.
Be aware that the update key in this Integration Interface should be composed of all the target columns mapped. Also activate the Distinct rows check box.
Thanks,
Sutirtha
Edited by: Sutirtha Roy on Jul 21, 2009 10:08 AM

Jdbc getting data from multiple tables

hi guys
how can i get data from multiple tables in MSAccess
please help

>
here is code thata i want to do
i have 3 tables in my MSAccess databace
Stud_O which consist name,surname fields
Stud_I consist address,tel
Stud_E department,faculty fields
Based on this I would guess that you are missing a key field. There is no way to connect the tables.
I make the class to insert data to the tables. But
cant do getting datas from this tables.
can anybody help me in making query
and method that displays reultset strings to the
textBoxes
A select ...
select name,surname from Stud_O. Use the executeQuery() method.

Update On data from multiple Tables

How can i update data from multiple tables(Using a Join)
using a single update statement.

Hii
Suppose i have following tables
create table emp_mas(empno number primary key,name varchar2(30));
create table emp_grad(empno number primary key,grade varchar2(1));
SQL> select * from emp_grad;
EMPNO G
100 A
101 A
102 B
SQL> select * from emp_mas;
EMPNO NAME
100 GREG
101 THOMAS
102 SAM
I would like to update information of employee 'GREG' Using a single update statement as
UPDATE (SELECT E.EMPNO,E.NAME,G.GRADE FROM EMP_MAS E,EMP_GRAD G WHERE E.EMPNO=G.EMPNO) J
SET J.NAME='GREG THOMAS',J.GRADE='B' WHERE EMPNO=100
Then i am getting Error message like this.
ERROR at line 2:
ORA-01776: cannot modify more than one base table through a join view
How can i achieve the result

POWL accessing data from multiple tables/objects

Hello,
I have a query on the POWL applications.
If the powl application has to access data from multiple tables/objects, then the solution would be creating a data structure of those tables/objects and referring to that structure in GET_OBJECT_DEF methods.
Is there any other soln? or I am right here?
The queries which are saved for a particular user are transportable? if not, how can they be made transportable?
Thanks & regards,
Ravish

you are right, you can do in get_objects method.
POWL_QUERIES are transportab;e, you can save them in POWL_QUERY transaction.
Best regards,
Rohit
http://wiki.sdn.sap.com/wiki/display/WDABAP/POWL

Move data from multiple Tables to a Single Table & Convert the list to ALV.

Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
        matnr type marc-matnr,
        maktx type makt-maktx,
        DISPO type marc-DISPO,
        MINBE type marc-MINBE,
        LABST type mard-LABST,
      end of i_final.
DATA: Begin of i_marc occurs 0,
       matnr type marc-matnr,
       DISPO type marc-DISPO,
       MINBE type marc-MINBE,
      end of i_marc.
DATA: Begin of i_makt occurs 0,
       matnr type makt-matnr,
       maktx type makt-maktx,
      end of i_makt.
DATA: Begin of i_mard occurs 0,
       matnr type mard-matnr,
       LABST type mard-LABST,
       LGORT TYPE MARD-LGORT,
      end of i_mard.
SELECT matnr
        dispo
        minbe from marc
        into corresponding fields of table i_marc
        where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
        75 'MRP',
        80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
        75 i_marc-dispo,
        80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
        MAKTX from makt
        into corresponding fields of table i_makt
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
        30 i_makt-maktx.
ENDLOOP.
SELECT matnr
        LGORT
        LABST from mard
        into corresponding fields of table i_mard
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
        30 I_MARD-LGORT,
        40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
        30 'Material Desc.',
        75 'MRP',
        80 'Reorder Qty.',
        105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
        30 i_final-maktx,
        75 i_final-dispo,
        80 i_final-minbe,
        105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
       30 i_makt-maktx,
       75 i_marc-dispo,
       80 i_marc-minbe,
       105 i_mard-labst.
*ENDLOOP.
Regards,
Vishal

Change like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
   WRITE: /10 i_mard-matnr,
   30 i_mard-lgort,
   40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
   READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
   READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
   MOVE i_mard-matnr TO i_final-matnr.
   MOVE i_marc-dispo TO i_final-dispo.
   MOVE i_marc-minbe TO i_final-minbe.
   MOVE i_makt-maktx TO i_final-maktx.
   MOVE i_mard-labst TO i_final-labst.
   APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.

How can we improve the performance while fetching data from RESB table.

Hi All,
Can any bosy suggest me the right way to improve the performance while fetching data from RESB table. Below is the select statement.
SELECT aufnr posnr roms1 roanz
    INTO (itab-aufnr, itab-pposnr, itab-roms1, itab-roanz)
    FROM resb
    WHERE kdauf = p_vbeln
    AND   ablad = itab-sposnr+2.
Here I am using 'KDAUF' & 'ABLAD' in condition. Can we use secondary index for improving the performance in this case.
Regards,
Himanshu

Hi ,
Declare intenal table with only those four fields.
and try the beloe code....
SELECT aufnr posnr roms1 roanz
INTO table itab
FROM resb
WHERE kdauf = p_vbeln
AND ablad = itab-sposnr+2.
yes, you can also use secondary index for improving the performance in this case.
Regards,
Anand .
Reward if it is useful....

Extracting data from multiple tables using DB connect

Hi,
I am having different tables which are having the same structure in oracle database but there names are different.Now i have only one datasource at BI side.This datasource shld extract data from the tables dynamically.How can i do it using DB Connect .
Thnxs

ahh I see - problem as you said then is if you then take on a new location!
I would then put into the source system a table identifier and create a view across all the tables
Then dbconnect from the view and use the selection parameter of table parameter if you wanted one infopackage per "location"
If you do need to have a new table in the source then just expand the view and create a new ipak
hence NO bw changes required that need a dev-q-p transport - just the ipak in prod and it;s the source systems problem to add the extra table to the view

How to get data from multiple tables

Hello Everyone,
I need to read data from a few tables (VBAK, VBAP, VBUK, VBUP etc.) because I'd like to get all open Sales Orders. I've tried to use RFC_READ_TABLE but it looks like it can read only 1 table at a time. I've tried to read data from individual table and then join them but it didn't work out very well because I got about 1.5 millions records from just the VBUP table. So anyone knows if there is any function that I can use to join those tables and just get the records I need?
Any help would be highly appreciated.

Hi Nhan,
Thank you for your reply.
Do I have to be a SAP developer to create BAPI on SAP? What kind of access rights do I need?
I've tired to use other BAPIs such as BAPI_SalesOrder_GetList and it doesn't work for me because I don't have all customer numbers and I need to get all un-shipped orders for all customers.
I've read a post on the internet brieftly menitoned that we can create a table to store information about the tables we want to join and then call the RFC_READ_TABLE function. Do you know if that is possible?
Is there any other way you can think of?

Creating table data from multiple tables

I want to be able to create a extract file of the data in the BKPF and BSEG tables. I need to create one line that contains a combination of fields from each table. I am thinking that I have to select the data that I need from the BKPF table into a work table and select the data that I need from the BSEG using the document number field from the BKPF as part of the selection into another work table. after I get the two work tables, I am going to have to read the BKPF table and move the fileds that I want to a third table and then read every entry in the bseg work table that matches the document number and move those field to the third work table. after that is completed, I will a one table that has data from both tables. is this the correct way to handle this. if there is a easier way to perform this operation, could someone please let me know
thanks in advance for the help.

Hi Timothy,
this would suffice.
data: itab like bkpf occurs 0 with header line.
data: itab1 like bseg occurs o with header line.
SELECT * FROM BKPF INTO TABLE itab
               WHERE BUKRS EQ P_BUKRS AND
                     BELNR IN S_BELNR AND
                     GJAHR IN S_GJAHR.
SELECT * FROM BSEG INTO TABLE ITAB1
          FOR ALL ENTRIES IN ITAB
                    WHERE BUKRS eq ITAB-BUKRS
                    AND BELNR eq ITAB-BELNR
                    AND GJAHR eq ITAB-GJAHR.
Regards,
Vivek

Loading Data from multiple tables into essbase using ODI

Hi,
We have a scenario where data comes from multiple tables. I would like to know how will ODI load this data for the right combination of the members

Hi,
I take it each data table has a field which maps to the other table. You can just drag the datastores on to the source interface and create a join between the tables.
Cheers
John
http://john-goodwin.blogspot.com/

Can a block in Oracle contain rows/data from multiple tables?

Similar Messages

Maybe you are looking for