Can a blurry photo be fixed some
can a blurry photo be fixed some ?
"1 blurry photo is a mistake. 20 blurry photos is a style." - Rick Sammon
There's no free lunch. Topaz does make a plug-in called inFocus. Reviews are mixed on how good it works. I have the entire Topaz suite so I have inFocus but I haven't used it enough to make a judgement. Luckily they have a free trial so you can try it out if you want risk-free.
Don't get your hopes too high. No expectations, no disappointments.
Similar Messages
-
Can you postpone propogating when fixing some boarding
As the hand goes across a TV screen that is being eliminated. Some of the boarder needs refining. What takes up so much time is the propogating. Can that be turned off while one fixes some of the boarders?
Is this why it is recommended not to have a base frame span more than 20 frames?I'm not sure I'm following you. I take it you are talking about RotoBrush. If so, let it work until it starts to foul up, pause the propagation and modify your selection. If you need to go back a frame or two, then continue. I usually set the range to about 10 seconds.
If you're talking about something else please explain. -
I made a photo album through iphoto. On some of the pages I wrote paragraphs about the trip and I did not put pictures on them. When I try to go buy the book, the program won't let me because not all of the pages have pictures. What can I do to be able to purchase this book just the way it is. Can I by pass that. Please help.
On some of the pages I wrote paragraphs about the trip and I did not put pictures on them
Did those pages have frames where photos were to be placed? If so try using a page layout that just has text without any photos on it.
OT -
While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library. -
Can't open Photos library, and how to fix it?
I successfully migrated from iPhoto library to this new Photos Library in April.17th, and everything seems okay except for some minor bugs.
but from yesterday on, I started Photos and got this message "Can't open Photos Library, try another."
If I try reading iPhoto or Aperture Library. Photos started migration from iPhoto or Aperture Library process again.
So, In short, the newly migrated default library can't be read by Photos.
Recently I did some import from cameras and a newly bought Gopro, and MAYBE A HINT, when I connected Gopro to Mac, Photos automactically opened up its window and tried to import videos but only left me a permanent freezing, so I did forced close to Photos...maybe at that time the library was damaged...
Please...Is there any method to recover or rebuild the damaged library? I really don't want to re-immigrate from iPhotos library. Do Photos get any build-in fix tools or alike?try to backup your photos library and hold down the option and command keys while launching Photos - repair the library
LN -
I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported. What does this mean, and how do I get back all my photos and fix this? thanks.
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know some details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is you library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
How do you fix this error? Can't access photos----" Your photo library is either in use by another application or has become unreadable"
Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create and use a new library then your current library is damaged.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
How do i fix blurry photos in either iphoto or another mac compatible application?
You can try the sharpness slider in iPhoto's Edit/Adjust pane. The same goes for any image editor that offers sharpness. It has limited effect and really can't sharpen a truly out of focus photo.
OT -
After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.
Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT -
I am trying to backup some .m4a files from my MacBook Pro to an external hard drive and suddenly tonight I am getting "The Finder can’t complete the operation because some data in “1-04 Time.m4a” can’t be read or written. (Error code -36)". I have searched for fixes but none of them are working. I have backed up this folder many times before with no issues. Any help is greatly appreciated.
By the way, I have repaired disk permissions on main drive and repaired both the internal hard drive of my MacBook and the external drive. No luck.
-
Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks
Hello, eco1.
Thank you for visiting Apple Support Communities.
This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location. If this is the case then I would recommend taking a look at the article below.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Cheers,
Jason H. -
I have an external hard drive which has my i-photo on it & some movies from i-movie that I have on disk now. But for some reason my ehd has a caution symbol on it & I can't move my event to free up space on my hd so that I can export i-movie events. Help!
Usually the caution symbol means that it's formatted as a PC compatible format like NTFS or most likely FAT32. For iMovie to use it the ehd must be formatted Mac OS Extended. Then iMovie will show it without the caution symbol and you can drag/drop open any Event/Project from that hard drive.
To find out if it's formatted as PC:
Go to the desktop, holding down the Control key click on that ehd and in the pop-menu choose 'Get Info'
Under Format: It will say whether or not it's Mac OS Extended (Journaled). The only way to undo a PC formatted ehd would be to copy everything off of it first, Erase/Format the drive using Disk Utility in the Applications>Utilities folder on your Mac, choosing the Mac OS Extended (Journaled) format in the pull-down menu there. -
I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.
I did not use ICloud or any storage and did not make any sync before.
Is there any Trash Can in Iphone in order to find them? I am dumb and I did not think about save them before connect to PC.Your photos are gone. They were wiped when you restored your phone. There is no "trash can".
You obviously don't understand how to use the iPhone properly. Attached is a link to the iPhone User guide. I suggest you read through it to avoid data loss in the future.
Best,
GDG
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
My granddaughter sent a text message to my iPhone 5 (IOS 8.1), and included some photos from a soccer tourney. I saved the photos to the iPhone, and they show up on the iPhone in the camera roll. I'd like to transfer some of them to my Windows7 PC, but can't figure it out. When I open Windows Explorer, many photos from my iPhone show, but not the ones from Elizabeth. Can anyone help me?
You can download iCloud for Windows program and turn on Photo Stream in your iPhone (Settings > iCloud > Photos, then turn on My Photo Stream)
Now, your new photos will be downloaded to your PC as soon as they are uploaded to iCloud automatically.
Or you can download something like iExplorer for PC (any third-party app) that can browse files in iPhone. With that, you can open your photo library in iPhone and drag and drop to the Desktop the photos you need.
One more way is browsing manually folders in your iPhone in Windows Explorer and just checking every folder in DCIM. In my case, the folder with the latest images was the pre-last one. There is a chance that you just didn't see the right photo last time you were checking iPhone folders, but if you know it is in Camera Roll, then it is 100% in DCIM, so the fastest way is just checking folders one more time. -
I want to delete photos from camera roll on my iPhone to clear space to install ios7 but after importing photos to iPhoto on my macbook pro only 4 out of 339 photos taken in September landed in events, though all 339 are in Sept photo stream. It seems like on previous uploads all photos "fell" into events according to the day they were taken, as well as into photostream. I want to make sure these photos stick around permanently and do not exist only in photo stream where I imagine they will eventually be bumped from my computer (photostream). Can anyone explain why some of my photos are landing in events and others are appearing only in photo stream?
You have uploaded two different things - pHotos are in one and only one event - if you have the same photo in two different events then you have imported it twice
Please explain what you want - your initial question and yoru current comments are 180 degrees apart
You say they are not all in events
Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?
Now you say they are
All 15 pics appear in Sept 2013 PS
It sound to me like you have no problem except you imported some photos twice adn you may not understand how the automatic import form PS works - but that is not clear
you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, to select Photo Stream > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture.
The event they are imported into is MMMM YYYY PS
If you import via iTunes sync or by connecting your IOS device via USB then they are importeed into the regular event structrue as defined in your iphoto preferences - and if you imoport via two or more different methods you will ahe duplicates
LN
Maybe you are looking for
-
Wlclient 9.2.4. compatibility with weblogic server 9.2.2
Hello, recently, we found an odd following problem: When client WL application trying to connect to the WL server during the WL server shutdown, then the client is not able to connect to the server anymore. It constatly gets a following error: org.om
-
Trying to delete my Contacts Storage using Clear Data button however it's Unavailable
Just recently upgraded to a Droid Razr (been a long time blackberry user) and really just beginning to understand some of the features. During the initial setup I didn't handle my contacts the way I would have preferred and would like to start over.
-
Getting error java.lang.NullPointerException while selection LOV
I am getting error java.lang.NullPointerException while selecting LOV. Please help SEVERE: Server Exception during PPR, #1 javax.servlet.ServletException at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277) at weblogic.servlet.
-
App working in preview/ADL but not working in .app
Hi, so I've been testing my code with the preview in Dreamweaver and also using the ADL terminal command on my Mac at work and the app I've been coding works really well when testing through either of those two testing interfaces. But when I actually
-
Java not loading in FIrefox... ever!!!
I am currently using Windows Vista and Firefox 3.0.11. For some reason Java applets or any pages running Java applications will not load. Instead, FF freezes up, "whites out", and I get the error "Firefox has stopped working" with the option to "Clos