Can a Business service with party be conveted to a IDOC LSpartner profile?

Hey ,
I have a B2b scenario like this -> Http(external sender) -> XI - > Idoc in my SAP.
I have configured the external sender as service with party. I have configured that sender as a Logical system in my R3 system.
I am not able to make the the service with party map to the LS I have defined. I am able to the same with service without party (adapter specific attributes). This make me wonder if service with party can be mapped to a LS?
I have gone through most of the post in SDN but none answer this specific question.
regards,
Arvind R

thank you for the response -
I tried the approch u suggested and it works. But it messes up the Hop list for the IDOC Ack - ALEAUD sent back...
I dont think there is some way to change the Sender/receiver info for the std ALEAUD messages is there? I would like to avoid making the ALEAUD as independent messages and then route them...
Regards
Arvind R

Similar Messages

  • Sending Idocs to R/3 Error when Business Service with a party is configured

    Hi All,
    I'm facing some issue when posting idocs (FINSTA) back to R/3 when Business Service with a party is configured in my Integration Directory. However, I do not have this problem, if the
    Business System without Party is configured. It seems that 'adapter specific' setting doesn't
    seem to work when you have a party.
    I have read the same problem faced by other SDN members as well, some suggested to have the latest patch to solve the problem. FYI, I'm using latest patch SP 15, but the problem still exist. The error that I have in the sxmb_moni is "Unable to convert sender XI party http://sap.com/xi/XI / XIParty / GABXI100 to an IDoc partner".
    Please assist. Thanks.

    Hi Arun,
    Thanks for reply.
    What do you mean by XI Party must map to a party in the R3 in the partner profile?
    For example, If my Party Name in Integration Directory is ABC01, I should create a partner profile of ABC01 in my R3? How if I have business service under the Party ABC001, what should I configure in my R3?
    Currently My Partner Profile in R3 is type 'B' - Bank.
    Thanks for helps.

  • Business Service Without Party in Integration Scenrio Configurator

    Hi everybody
    I am stucking in a small issue but do not found a related thread.
    Can anybody explain me, why I cannot assign a "Business Service" of typ "Service without Party" to an Application Component? I am try to configure my integration Process and call in the directory Tools --> Transfer Integration Scenario from Integration Repository. In the following Configurator I can only assign Business Systems from SLD or Services with a Party depending on the settings of the Application Component in the Repository (Flag "External Party with B2B Communication"). If you configure the scenario manually it is possible to involve Business Services without party. But I would like to make use of the Wizard and my Customer has a lot of Systems maintained as Business services.
    Any suggestions?
    Regards Oliver

    Hi,
    I have not done this type of task before.. but from the given links
    see the below information was in the above first link
    The following steps are then only required if the application component has at least one connection to a B2B component.
           3.      On the Business Services for B2B tab page, enter the business service that you want to use for B2B communication.
    The integration process service that is already entered on the  Integration Process Service for A2A tab page is then assigned to this business service.
    B2B Component...
           1.      On the Business Services for B2B tab page, assign the business services.
    Use the input help () to select the business services.
           2.      If you want to create a new business service, choose Create Business Service ().
    To assign multiple services simultaneously, choose Input Help () in the toolbar of the table (only when assigning business services and business system services).
    Regards
    Chilla

  • Transport - Business services and Party components

    Hi Folks ...
    My SLD has Business systems with different names for each of my environment .
    e.g. - ECC_DEV -> ECC_QAS ->ECC_PRD
    and the transport targets takes care of the name changes when the objects are transported.
    How can I use the same concept for Business services and Party services. these objects do not have an entry in the SLD hence i cannot use the transport target concept.
    I Would like my services (both with and without party) to have different names in deifferent environments -\e.g. - BS_DEV -> BS_QAS -> BS_PRD.
    Possible?
    Regards,
    Arvind R

    Hi,
    >>>Possible?
    yes&no
    - transport targets work only with business systems
    - if you want to change changed names you can always
    create a business system instead of a business service
    but just make it third party business system
    this way it will work later on
    Regards,
    Michal Krawczyk

  • Business service and party

    business systems are logical names to technical systems
    what are business service and party explain with simple example.

    Hi
    business systems are logical names to technical systems
    what are business service and party explain with simple example
    Business service are abstract of senders and receivers which does not point to any Technical system or SLD components. This is useful when you are trying to achieve Cross Company integration or B2B.
    When you are not able to define system in landscape for a system refer to another location use business service for that.
    Example
    Company A Location A ERP1wants to integrate with Company B Location B ERP2
    Now you are not having ERP2 in Company A landscape then you can rely on Business service for ERP2 and Business system for ERP1 in Company A landscape. (Service without party)
    Company A can use Company B as a party as well. Then this will be considered as Third party communication and you can have components with Party.
    Refer
    http://help.sap.com/saphelp_nw70/helpdata/EN/c7/301640033ae569e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/c817d9d2296bb2e10000000a1553f6/frameset.htm
    Thanks
    Gaurav

  • Service with party and service without party

    Hi all,
    Can any body please suggest me when do we choose service with party and service without party?
    We have a scenario where i need to use the webservices provided by the third party Java Based system. i am sure that i need to define Business service as technical details of the system are not available in the SLD. Please do correct me as i am configuring this scenario for the first time.
    Any links related to a Web Blog / Thread would be great.
    Thanks and best regards,
    Kulwant Singh

    hi
    1.we go for service without party when we are having A2A communication.
    A2A means application to application communication, it is used when two systems in same landscape try to communicate with each other. Systems in same landscape means both the systems are belongs to same organization or a company.
    Normally in A2A communication sender and receiver is inside one organization and developer have freedom to define communication rules .
    refers to link
    http://help.sap.com/saphelp_nw04s/helpdata/en/66/58934257a5c96ae10000000a155106/content.htm
    2.we go for service withparty when we are having B2B communication
    B2B means Business to Business  communication .It is used when there is exchange of information between two different Parties or companies or landscape.
    When two applications in different companies communicates with each other we call it  B2B Communication.
    in case of B2B every party has it own rules which must be followed if we want to communicate between different organization. 
    refers to link
    http://help.sap.com/saphelp_erp2004/helpdata/en/ca/efb540efe68631e10000000a1550b0/content.htm
    rewardspoints if helpful
    BR
    Kasturika
    Edited by: Kasturika Phukan on Feb 12, 2008 6:06 AM

  • Scenario Configurator and Business Service without party

    HI all
    Quick question. I can't seem to assign a business service(without party) to an A2A connection in the scenario configurator on the ID. I have an email router service I created to push some emails to internal users, and it only allows me to choose Business systems. It does not seem to give the option of using the business services.
    Is that correct, or am I missing something.
    Thanks,
    Chris

    Hi Richard,
    If in IR u had seleced the check box "External party with B2B Communication" under Application Component, only then u may c a business service under the scenario onfigurator.
    So in ur case u couldnt view the business service.
    Regards,
    Prateek

  • Error in Service with Party and Service without party scenario

    Hi All,
    I  am configuring an external system to customer SAP system scenario.
    I have configured the external file system as Service with Party and the receiving SAP system as Service without party.
    All the configuration including the "Virtual receiver" set up has been done properly but i am still getting the error "No receiver could be determined".
    Can somebody help me on this ?
    Thanks in advance.
    RGds,
    Vasanth.

    Vasanthakumar,
    in my previous experiences with internal/external parties communication, I've found out that the best practice is to create an integration scenario and then create the configuration scenario from scenario wizard. It is much simpler and easier.
    Briefly, you'll have to create a dummy party/service in order to "wrap" your internal system, since the external party should not receive information regarding internal systems (Business system name, for example).
    Regards,
    Henrique.

  • SAP PI Modeling: Two Business systems with party

    I am triing to create SAP BPVT Interaction model that describe connection of 2 process components. Each of that components must be business systems with party. As I understand process component must be Process component at business partner for assigning business system with party.
    If I create SAP BPVT Interaction model with two Process component at business partner, I get they connection in type of "Other Interaction". When I try create new assigment, I get error "Unable to assign the model to this connection type due to the method or profile in use".
    How can I create correct connection?

    Hi Eugenia,
    Please see note 1084315 which descriibes the the multiple backend scenario.
    This should be relevant here.
    Best regards
    Christophe

  • Dynamic routing for a Business Service with multiple operations

    I have two business services with multiple operations. Business service A (bsA) has operations OpA1 and OpA2. Business service B (bsB) has operations OpB1 and OpB2.
    Depending on incoming Proxy message and operation, I have to do one of the following
    1. If someValue = A and operation= Op1 then invoke operation opA1 of bsA
    2. If someValue = B and operation= Op1 then invoke operation opB1 of bsB
    3. If someValue = C and operation= Op1 then invoke operation opA1 of bsA AND* operation opB1 of bsB and return aggregate data of both invocations
    1. If someValue = A and operation= Op2 then invoke operation opA2 of bsA
    2. If someValue = B and operation= Op2 then invoke operation opB2 of bsB
    3. If someValue = C and operation= Op2 then invoke operation opA2 of bsA AND* operation opB2 of bsB and return aggregate data of both invocations
    Using a dynamic route node or dynamic routing options, I am able to achieve cases 1, 2, 4, and 5.
    But for cases 3 & 6, I can not use a route node. When I use a Service call out instead, then I am forced to create a Operational branch but that does not seem like the best design since for every new operation added to the business services, I have to add a new branch to the Operational branch and redo all the functionality for that branch.
    Basically, I am looking to achieve the functionality of the Route node ( no need to specify the operation ).
    Any thoughts/ideas on what the best design would be?
    thanks

    For cases 3 & 6, why don't you route to another proxy service where you can simple do two service callouts, merge output data somehow and return them to the first proxy?
    If you look for "special route feature", that could possibly call two services for a single message, I'm afraid you won't succeed.

  • Developing Business Services with ADF BC

    Hello all,
    I was following the tutorial at http://www.oracle.com/technology/obe/obe1013jdev/10131/bslayer/bslayer.htm#t2s5, which is Developing Business Services with ADF Business Components
    AND i was wondering if i could add a custom validation that would: prevent the user from entering a Gender IF the credit limit is greater than 400? Is this possible? If so, could some point me in the right direction
    Cheers

    Hi,
    you have two options:
    1. add the validation on the ADF BC model using a method validator. This would compare the two attributes and throw an exception if the business rule is violated
    2. Use a ValueChange Listener on the credit limit field (in association with a autosubmit=true setting on the field) to enable the gender field through a Partial Page Refresh. To programmatically refresh a field using PPR, you create a binding of the component to refresh o a managed bean using its binding property. Then you call
    AdfFacesContext.getCurrentInstance().addPartialTarget(<component reference here>)
    Frank

  • 10.1.3.1 : Developing Business Services with ADF BC tuto issues

    Hi,
    I was doing a learning session at my office based on the 'Developing Business Services with ADF Business Components' tutorial : http://www.oracle.com/technology/obe/obe1013jdev/10131/bslayer/bslayer.htm. The topic Creating ADF Business Components > 9 shows how to create EOs, VOs, AM and the corresponding UML diagram.
    When using JDev 10.1.3.1 :
    * the diagram is not generated as expected,
    * the java domains are not created from DB domains.
    Under JDev 10.1.3.2 :
    * the java domains are created from DB domains,
    * the diagram has been generated on 1 out of 3 computers.
    Any clues on what's going on or any known bugs ?
    Thanks,
    Seb.

    Hi,
    Today in 10.1.3.1 the diagram generation just works. It seems the keepResident extension was causing troubles as the exception stack trace mentioned its name... I just removed it.
    But still, the domains are not generated as expected. I've made several tests even in a fresh installation of JDeveloper 10.1.3.1.
    Seb.

  • Can a business service call a proxy service in OSB

    In Oracle service bus, can a business service call a proxy service and if yes , what is the scenario?
    Thanks in advance
    Priya

    Yes a business service can call a proxy service......for example set your PS as http proxy service and set the endpoint url of PS in the business service..... Lets say when you have three service callouts to be done...the third service callout needs to retried in case of any failures, then you may move the third service callout to a new proxy service and use the buisness service for calling it,,, use the BS retry settings for retyring..

  • How can I Route to two proxies or business services with out split join

    Hi,
    How are you?
    I´m trying to use a proxy to invoke 2 other proxiers or more at the same time but when trying to build a Split Join is giving an Error about the Security that is in the WSDL which is WSSecurity, so far I think that SPlit Join can´t handle this and is a must right now so I´m trying to figure out how to Route a Message to two proxies or business services doesn´t matter if it is in a secuencial way.
    Hope somebody knows what to do.
    Kind Regards,
    Gerardo J

    Hi!
    Thanx for the response, That´s the way I´m implementing it at this moment and is working fine.
    Thanx in Advanced!
    Kind Regards,
    Gerardo J

  • USe of Business services with BPEL or ESB

    Hi,
    Has anyone come across any example on how to use Busiess services with BPEL or ESB.
    Oracle App Server , JDE 812 , Tools 8.98 , SOA suite 10g

    Samir,
    I don't see any answer for your post.
    Did you find a solution. I would be interested to know as how to integrate business services in JDE with BPEL/SOA 10g or 11G.
    I would appreciate if you could share the approach/solution you followed.Also, please let me know if there are any docs which I can for jde-fusion integration.
    Thanks
    Edited by: user13374451 on Jul 26, 2010 9:15 AM

Maybe you are looking for

  • Safari 4.0.3: "un-update" or locate "turn features off" buttons?

    Pardon me if I'm a bit confused; this is the first forum I've visited that seems to prefer new threads to posting in related threads. I think. Short version: I got the "updates available" message a couple weeks ago, and I updated. I now have Safari 4

  • NTSC and PAL

    Under iDVD preferences and the Projects tab it asks a few things that I know nothing about: 1) Video Mode: NTSC or PAL. What are those and when would I use one over the other? 2) Encoding: Best Quality or Best Performance? Which is better to use and

  • Hdmi to component or s video converter

    what is a good converter box to convert and hdmi signal to a component or s video signal?

  • Autopopulate a text field in a table from table

    I am not sure if it is possible but I will explain what I would like to do:- I have a table which allows the user to add a name, they also have the ability to add additional names to the table. What I would then like to do is auto populate another ta

  • Funds precommitment in PR

    Hi, Does anyone know how to configure funds pre-commitment for PR and funds commitment in PO? Many Thanks.