Can a Calendar Event Name Contain the Time?

When I enter an event in calendar, I name it and put the time right after the name.  It then enters the time in the detail box that can be opened up regarding the event.  What I want to do, however, is show the time in the calendar, right after the name, without opening up the detail box.  If I open up the detail box and edit the name by adding the time, it will stay there.  Is there a way for me to avoid this extra step and have the time show up right after the event name when I create the event?

Also, if you open the Calendar in a "Space" (or make the window larger) the window will be large enough for each day to show event times in month view.

Similar Messages

  • Ical can´t save the event "event name" to the exchange server

    I have been trying to set up iCal to work with exchange in several Macs runnig Snow Leopard but there seems to be some time zone issue.
    When I try to save a new event, I get a error: iCal can't save the event "event name" to the exchange server. The account "account name" currently can't be modified, to discard...       If I change the city in time zone preferences to anything outside Mexico (for example Dallas Tx.) then everything works perfect, the problem is all of my users are in Mexico City aund using CST instead may cause other problems.
    I have tried with time zone support enabled and also disabled.
    Something very odd is that existing events can be modified or deleted, even with the city set to Mexico in time zone preferences.
    ¿Any suggestions?

    UPDATE 2: Found aother post that explains that this problem was fixed by enabling time zone support in iCal and then changing the city to the correct one by clicking in the upper right corner of iCal´s window where the time zone is displayed.  https://discussions.apple.com/message/10108361#10108361
    Well, I followed instructions mentioned above. By clicking on the upper right corner, a new window opens showing current iCal time zone settings (Not the same as Mac OS), in this window, time zone seems right (CDT), but as closest city, "UTC-UTC" is selected, so I change this to México and click OK, but the problem continues. If I go back to this iCal´s time zone window, "UTC-UTC" is still selected! and no mater how many times i change it back, after clicking OK, "UTC-UTC" comes back!.
    Something else I just found out is that if the city is changed to anything outside Mexico within the same time zone in system preferences, as I mentioned before I can save events, but now in the upper right corner of iCal, I have two different CDT´s, one named "CDT Central Time" (the one that works) and other named "CDT Central Standard Time" (the one that doesn't).
    My guess is that because daylight saving start and finish dates in Mexico are different from USA's, Apple created a different time zone with Mexico's rules (CDT CentralStandard Time) but something is wrong with it.

  • Why does calendar assume the time in an event subject,is the time you want for the event?

    If I try to enter any number with a colon, Calendar assumes, that's the time for the event.  Not sure why this change was made.  I need to enter a time in the subject line, and a different time for the event to happen.  Old version allowed this with no problem.  What do I need to do in Mavericks to allow this.???
    Many thanks in advance for any solutions.
    Ned C:

    Hi,
    I have a small application called Multi Event Filter available on the Mac App Store which creates Calendar events from text or spreadsheets.  While not really what it was designed to do, a side effect of Multi Effect Filter is that it retains the times entered for events in the titles.
    You can find more ablout Multi Event Filter here.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Discussions Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • IPhone 4S Calendar Event Defaults to Incorrect Time Zone

    My iPhone, Win7 PC is set for Eastern Time. I use Outlook/Exchange and the Outlook calendar in Options is set for Eastern Time as well. I never had any issues until recently. My iPhone syncs with the Exchange server using ActiveSync.
    A few weeks ago I was out west and changed my Win 7 O/S time zone to Pacific Time. I did not change anything in Outlook or on my iPhone. The iPhone has always been set for “Set Automatically” (Settings/General/Date & Time). Also, in Mail, Contacts and Calendars my Time Zone is Set for Montreal (where I live) with Time Zone Support “On”. I have never changed this from the day I got the iPhone. Whenever I travel the time zone automatically switches. When I came back from the west coast my phone switch back to Eastern as it should and I manually set the Win 7 O/S to Eastern as well.
    Now for some reason, when I create a calendar event in Outlook (i.e. on the desktop) the event shows up correctly on the iPhone (example: a meeting for tomorrow at 2:00 PM Eastern shows up as tomorrow at 2:00PM on the iPhone). However, when I “edit” the calendar event on the iPhone, the time shows up as 11:00AM and the time zone is Los Angeles (3 hours apart from Montreal). You can just imagine how this is causing me havoc as I do business in different time zones and have to reschedule meetings often.
    I have tried to set the time zone to something else and then back to eastern or Montreal. It makes no difference. When I create a calendar event directly on the iPhone the default time zone is Montreal and it shows up correctly on both devices.
    Any ideas what’s going on?

    Hi Song&DanceMan, 
    Welcome to the Apple Support Communities!
    Issues with calendar time zone can be very frustrating. It sounds as though the Time Zone Support feature may be affecting these events. Please use the attached article for more information on Time Zone Support. 
    iOS: How to adjust Time Zone Support for calendars
    Cheers, 
    Joe

  • How can I count events during a given time with 2 counters (6025 E)

    Hi, How can I count events during a given time (1 sec for example) with 2 counters:
    what is the best way?
    how should i configurate both counter?
    i have done the 1st counter in ev_counter with the gate being the output of the 2nd; and how can i say to the 2nd to trig the first after 1 sec counting? (trig at start and at end) what are the functoins calls in NIDAQ. i am using Visual C++

    Greetings,
    When you perform event counting a gate signal can be added such that if a low signal occurs on the gate, then the counter will pause. When a high signal is seen, the counter will continue counting edges. When you install the NI-DAQ driver you should have installed the examples for Visual C++. The counter examples are found in \Program Files\National Instruments\NI-DAQ\Examples\VisualC\Ctr. Take a look at STCeventCount.C. Be sure to only use STC examples with your hardware. The E-series boards contain the DAQ-STC chip.
    Now, all you need is a gate signal with a width (high time) of 1 second. You could use an external frequency or pulse generator to do this. Or, you could just use the second counter found on your PCI-6025E board. In this
    case you could configure the second counter to generate a single pulse. Take a look at the STCgenerateSinglePulse.C example. As long as the pulse is in a high state for one second you can use it to gate (or time) your counting of events.
    Regards,
    Justin Britten
    Applications Engineer
    National Instruments

  • HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

    I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

    Thanks Roger W1,
    Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
    This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
    After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
    This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
    The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
    Thanks,
    Jay

  • The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

    got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
    The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
    Raj

    Hi
     first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

  • Can i change event alert in the calender to one month before

    can i change event alert in the calender to one month before

    Vamsi,
    <b><i>Then Dispaly name Has been Changed But In My Postings my old name is Remains Same</i></b>
    Where u are seeing ur old name in ur thread? Please make sure only the display will change not the contents which u wrote in ur questions/replies. Like Best regards Vamsi, this one u are referring to? If yes then it won't changes.
    Best regards,
    raj.

  • CS4: How can I copy named potions of the time line to the projects panel?

    I am trying to copy named portion of my time line to the project panel & I can't past the segment.
    I copied a large AVI file to the time line, split it up into sections, & am trying to place the individual rename section into the Projects Panel. I can Copy the segment, but when I try to Paste it into the Projects Panel the Paste command is not "lighted up".
    How can I copy named potions of the time line to the projects panel?
     

    I found a way albeit a tedious method:
    positioned the render bar( I do not know the proper name) to encompass each segment separately.
    Exported that segment to Media.
    Media in turn transferred the segment to the Media Encoder program.
    The Media Encoder, after processing the segments, deposited the files in a temporary folder.
    Lastly, imported the content of the folder to the Project Panel,
    Thank you for all your suggestions.

  • How we can configure new pricing procedure at the time of billing document

    Hi SD Gurus,
    Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
    Thanks & Regards,
    Sreenivas.P

    Hello,
    Why?
    The sales order confirms the price given to the customer.  If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
    Regards
    Waza

  • How can I delete a name in the address of a text message?

    How can I delete a name in the address of a texas message?  The letter W appears as an addressee in error.  The text message was not sent.  The other addressess in the message was correct.

    if there are going to be a lot of dash characters you could read the string character by character, compare the value of the character with the range of values for a letter in ascii, and not copy it to a new string if it doesn't match. If the odd character out is only going to be a dash, you can search the string for the character, split the string at this point, append it to a string buffer and keep doing this till you're done. Just suggestions :)

  • Can I Change My name in the Profile

    Hi All,
    Don't mine any one that  I Asked this Q here
    How To Change My Name in the SDN Profile ???
    I Given My Pet name At the Time of Registration in SDN.
    So I Want to Change My Display Name As Wel As The name in the Database
    I Tried Like this
    GotoMy Profile-Update Profile
    Here I Changed First name Last name Display Name
    I Logoff the User
    Then Dispaly name Has been Changed But In My Postings my old name is Remains Same
    I Want to See the Changes to Those Also
    Please Let me Know
    Regards
    Vamsi

    Vamsi,
    <b><i>Then Dispaly name Has been Changed But In My Postings my old name is Remains Same</i></b>
    Where u are seeing ur old name in ur thread? Please make sure only the display will change not the contents which u wrote in ur questions/replies. Like Best regards Vamsi, this one u are referring to? If yes then it won't changes.
    Best regards,
    raj.

  • Can we run script logic at the time of preparing reports.

    Helo Everybody!
    I am new to SAP BPC.
    Can we run script logic at the time of preparing reports.
    Thanks & Regards,
    Satish.

    If you mean, "Can we run script logic at the time of preparing reports" is equivalent to entering data into the report and sending it to the database, then yes, you may run logic as Marcel indicates.  Defualt logic is ALWAYS run for ANY and EVERY set of data that is sent via an input template from the field.  You may also run logic when posting a jOURNAL entry as well.  But be careful....if default logic attempts to perform to MANY or COMPLEX calculations, the time it takes to complete the process may not be in expectations with the users plans.  There is a fine design balance required when planning to run logic at the time of input, as opposed to running in a package or at specific times during the day.
    Hope this helps.

  • I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??

    I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??

    Bryan,
    You can download both at the same time.
    But you may wish to start off with one and use it full time, then download the other later, so you get the maximum possible time with both.
    If you have trouble getting the free trial on the Adobe site, you may try here or here:
    http://prodesigntools.com/tag/ddl
    http://technolux.blogspot.co.nz/2011/02/adobe-direct-download-links-less-akamai.html#more

  • Can i store my movies on the time capsule and access to watch on my new ipad?

    can I store my movies on the time capsule and access wireless to watch on my new ipad?

    TC is not a media player.. it has no smarts whatsoever.
    If you have an app on the ipad to play files.. then the ipad can play files from anywhere.. even the TC.. but the TC contributes nothing. Do not move your itunes library to the TC.. that is asking for trouble.

Maybe you are looking for