Can a change be made to the original Word document without losing form fields in a saved PDF form?

I have a new fillable form created with Acrobat 9 that has 10 pages of fields on it. I noticed a typo in the original Word doc I created the form from and wondered if there is anyway to make changes in the source document without having to recreate all fields again.
Thanks!
Frank

Yes, just create a new PDF and replace the pages of the old one that has the form fields with the pages from the new: Document > Replace Pages
Any fields, code, bookmarks, links, etc. will be retained.

Similar Messages

I have an iPad and iPhone. My husband has an iPad and iPhone. His iPad is under his own Apple ID, but his phone is under my Apple I D. Can I change his phone to his own Apple ID without losing things like his contacts and photos?

I have an iPad and iPhone. My husband has an iPad and iPhone. His iPad is under his own Apple ID, but his phone is under my Apple I D. Can I change his phone to his own Apple ID without losing things like his contacts and photos?

Create a new user account on the computer that he can log in to.

HT201342 My iTunes account is under my @yahoo email address and I became accustomed to my @Me email and now like the idea of the @iCloud email address that was made. My question is can I change my iTunes account to my @iCloud name without losing my purcha

My iTunes account is under my @yahoo email address and I became accustomed to my @Me email and now like the idea of the @iCloud email address that was made. My questions are....can I change my iTunes account to my @iCloud name without instead of my @yahoo name without losing my years snd years of purchases ? Can I also create an @Mac address ? ....or is my @yahoo and my @iCloud already recognized as the same by apple and my purchases would already be fine as well as restoring my devices ?

Your purchases are permanently tied to the Apple ID (account) used to purchase them. They can't be moved to another account and you can merge accounts. You can start making new purchases with your iCloud ID if you want, but you will end up with two sets of purchases under two different IDs, adding further complication to your life.
Also, your @icloud email address is an alias of your existing @me address; emails sent to either address will be routed to the same inbox. You can decide which one you want to use as your default (as discussed here: http://support.apple.com/kb/HT5441) but you can't separate them.

How to Supply the form field values to a pdf form when loading it

I am working on a web site project using Asp.net where the user has to fill in a PDF eform in acrobat reader. Then when he clicks on submit it returns to my asp.net app and the PDF form supplies the values back to my asp.net app. So my asp.net app has the values that were filled in the PDF form and can save those values and work with them...
OK.
What I need to know is when I am in my asp.net app, and the user wants to go back and reopen the same form, from my asp.net app..... then how do I pass back the values that were saved back to the PDF form??
I know if I had a way to pass the values to the PDF form in some way then in the Doc.open or doc.load event of the form I could easily write a little javascript to plug in the values in the PDF form fields.
but how do I pass those values from my asp.net app to my PDF form???
thanks

Thanks bcweed for all the info. I fixed my problem, it had something to do with LiveCycle Designer. If I just use Acrobat to add the form fields, then the FDF works fine. As to your situation with the SavToBuf, that happens to be the method that I am using, so I will just post my code here, and maybe you can pick out what is different from yours. The Response.BinaryWrite(FDFin.FDFSaveToBuf)is at the bottom.
Sql = "SELECT * FROM Invoices" & WHERE
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open Db_Conn_Str
Set Rs = Server.CreateObject("ADODB.Recordset")
Rs.Open Sql, Conn, adOpenStatic, adLockReadOnly, adCmdText
If Not Rs.EOF Then
End If
Set FdfAcX = Server.CreateObject("FdfApp.FdfApp")
Set outputFDF = FdfAcX.FDFCreate
'VendorID = VendorName = VendorNum = InvoiceDate = PreparedBy = ""
Gross = 0
For I=0 To Rs.RecordCount-1
If InStr(VendorID,Rs.Fields("VendorID")) = 0 Then
VendorID = VendorID & Rs.Fields("VendorID") & ", "
End If
If InStr(VendorName,Rs.Fields("VendorName")) = 0 Then
VendorName = VendorName & Rs.Fields("VendorName") & ", "
End If
If InStr(InvoiceNum,Rs.Fields("InvoiceNumber")) = 0 Then
InvoiceNum = InvoiceNum & Rs.Fields("InvoiceNumber") & ", "
End If
If InStr(InvoiceDate,Rs.Fields("InvoiceDate")) = 0 Then
InvoiceDate = InvoiceDate & Rs.Fields("InvoiceDate") & ", "
End If
If InStr(PreparedBy,Rs.Fields("PreparedBy")) = 0 Then
PreparedBy = PreparedBy & Rs.Fields("PreparedBy") & ", "
End If
Rs.MoveNext
Next
Rs.MoveFirst
outputFDF.FDFSetValue "VendorID",VendorID,False
outputFDF.FDFSetValue "VendorName",VendorName,False
outputFDF.FDFSetValue "InvoiceNum",InvoiceNum,False
outputFDF.FDFSetValue "InvoiceDate",InvoiceDate,False
outputFDF.FDFSetValue "PreparedBy",PreparedBy,False
For I=0 To Rs.RecordCount-1
outputFDF.FDFSetValue ("Line."&I), Rs.Fields("Amount")&"", False
outputFDF.FDFSetValue ("Company."&I), Rs.Fields("Company")&"", False
outputFDF.FDFSetValue ("GL."&I), Rs.Fields("GL")&"", False
outputFDF.FDFSetValue ("CC."&I), Rs.Fields("CostCenter")&"", False
outputFDF.FDFSetValue ("DocNum."&I), Rs.Fields("DocNumber")&"", False
Gross = CCur(Gross) + CCur(Rs.Fields("Amount"))
Rs.MoveNext
Next
outputFDF.FDFSetValue "Gross", Gross, False
Rs.Close
Set Rs = Nothing
Sql = "UPDATE Invoices SET DatePrinted = '" & Now() & "'" & WHERE
Conn.Execute Sql
Conn.Close
Set Conn = Nothing
outputFDF.FDFSetValue "PrintDate", Date(), False
outputFDF.FDFSetFile "http://admin/invoices/pdf/InvoiceAuthorization.pdf"
Response.ContentType = "application/vnd.fdf"
Response.BinaryWrite outputFDF.FDFSaveToBuf
outputFDF.FDFClose
%>

The Toolbar Icons have changed size - can I change them back to the original size?

Icons were good before update to 31.5.0

I'm not sure what version of TB you were using before, but there has not been any changes to size of toolbars, menus or icons in the recent versions.
Check your graphics driver, maybe it needs to be updated.
Maybe you were using an addon and either is not enabled or needs updating:
https://addons.mozilla.org/en-us/thunderbird/addon/theme-font-size-changer/
Maybe you used a much older version of Thunderbird and are now seeing a different toolbar. You can get all the toolbars back. See image below.

How can i change a low resolution photo into higher one without losing much quality.

I opened a photo and it has a poor quality, how can i fix it to a better one??

You really can't, but there are some tools out there that will do _some_ upsizing.
For example, Genuine Fractals does a pretty good job. You could increase size, then instead of printing at 72dpi (screen resoulion) you could print at 300dpi. Then add things like gausian blurs, sharpening, demozaicing.. ect...
But as Dorin said, it will not be good becuase you can't create what isn't there. But sometimes with a LOT of work, you can create the illusion that something might be better...
Cheers!

I have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?

i have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?

Select the Zoom Tool in the tool box and see if Scrubby Zoom is unchecked or greyed out in the tool options bar.
(you want Scrubby Zoom checked)

I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

HT4314 If I change my nickname and decide that I have made a mistake can I change it back to the old nickname or will it say nickname alreay in use?

If I change my nickname and decide that I have made a mistake can I change it back to the old nickname or will it say nickname alreay in use? I belive that my brother deleted my nickname from his game center account, so when I made my own apple I'd and I went to make a name for my game enter it says that it is already in use. But it already got deleted from my brothers account

Ip address really cannot become corrupt.. let me suggest you go into the setup and change the ip lease renewal time to as short as possible.
You can actually set it to minutes.. so use say 5min.
I would also change the DHCP range as well as that will then force all clients to renew to different IP.. and whatever is on the "corrupt IP" will be left behind.
No factory reset is required..

HT2470 The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything!

The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything! Help!

Select a Finder window, Finder->View->Customize Toolbar…, and add it back.

Modifications made to duplicate projects in FCP X also made to the original

Hi.
I'm basically trying to make a "save as" version of a project so I can change what I have without risk of losing everything I've done. But every time I save a new version of the project (and even rename it, store it on another drive, etc.), the changes I make to the new version are also made to the original. So it's pointless. I'm also not getting the popup "duplicate project" window (which should give me a choice of where and how to save the project) I'm supposed to get when I click on "Duplicate Project." What am I doing wrong? Or: How can I simply save a fixed version of my project?
Thanks!

That's disappointing for you.
I have no idea why it is not working correctly.
Here's what it is supposed to do:
Duplicate projects as snapshots
The Duplicate as Snapshot command creates a self-contained copy of a project containing compound clips or multicam clips. Specifically, duplicating a project as a snapshot makes copies of the compound or multicam “parent” clips and embeds them in the project so that any changes to other instances of the clips do not affect the snapshot.
My suggestion is to trash the FCP X preferences in case there is an internal issue.
Al

I purchased a Maxx at FULL retail price (out of contract) to keep my unlimited data. An unauthorized/illegal change was made to the plan and all VZW could do was offer me $20 in credit.

As the title says:
I purchased a Droid Maxx at full retail price (approximately $540) to keep my grandfathered unlimited data. An unauthorized/illegal change was made by my younger sister (who is not an account manager and stole the information from my mom) to the plan and I was not notified within the 14-day closing period to revert the changes. For the record, both my mom and I are account managers, my younger sister is not.
I went in to my account (and changed all the information) and found out that when changes are made to the account online, you have to send an authorization text to one of the phones--however, you can send this authorization to ANY of the phones on the plan, so my sister sent it to hers (instead of an account managers).
So, the only reason I found out about this change to my plan was via a text message telling me I was "approaching max data," which of course should not happen with unlimited data. My younger sister did not tell anyone she made the changes.
When I found out about two (nearly three) weeks ago, I called Verizon to open a ticket about it. They did, said they would call/text me back a few days later--they didn't. One week later I made another phone call to see what the status on that ticket was--the rep said that the other rep was supposed to call me, but didn't, and so he pushed the ticket again. Lo and behold, another week later, still no response from VZW about the ticket. So I called again only to find out that the request to revert the data plan back to unlimited had been denied.
I spoke with that representative for nearly 40 minutes and all she could offer was some unwanted advice about what to do about my sister's behavior or that "I'm so sorry that someone would do that." I told her I wasn't looking for consolation, but for a compromise on either getting my unlimited data back, or refunding the difference between contract and full-retail price of the phone. I threatened to leave VZW because of this and all she could offer was a measly $20 credit.
I have filed a BBB complaint against Verizon Wireless for this issue as an illegal change that goes unnoticed past the 14-day closing period should be addressed in a more urgent manner.
I have also reached out on Reddit and Twitter, because obviously calling the VZW support does nothing to alleviate my situation. I am very dissatisfied with how VZW is handling an illegal and fraudulent change on my account that has shafted me out of 500 dollars.

You seam to be focusing your anger at Verizon and not your sister. Verizon followed the rules and required IDs and passwords to access the wireless account. You and/or your mother are supposed to safeguard that information. Your sister has committed the felony by stealing your mothers identity for personal gain.
You say "I am very dissatisfied with how VZW is handling an illegal and fraudulent change on my account that has shafted me out of 500 dollars.' My question to you is who made the illegal and fraudulent change to your account? Verizon or your sister? Keeping in mind your sister had all the correct IDs and passwords,
I'm sure if you went to Verizon and wanted to make some changes to your account, and you had the correct IDs and passwords, you would be upset and angry if they put you through the 3rd degree because they thought you were committing fraud.
Good luck to you, (seriously) whatever happens,

Orders to stay release (VKM3) even if changes are made to the order

Hi,
Is there a setting to keep the sales orders in released status once the order is release for credit through VKm3.
That is even if the order is release if you make any changes to the order it goes back to credit blocked status.
Is there any way to stop this from happenin. I want the order stay released even if any changes are made to the order once a release has been done in VKm3.
Thanks
Keshi

Hi,
Go to the transaction code OVAK,
Select the correct Credit group and risk category and enter into the features of this combination.
Here if you check the fields, you can find that there are certain fields which decides whathappens to a sales order when it is released from credit block and then some changes made.
You can configure these fields to enable your functionality. As I am in different network now, I am not able to give u the correct fields.
But as per the functionality, it should ideally block the order because the change can even be in price , that is the Credit exposure itself. Hence it should ideally block.
Hope this helps you to decide.

My ipod is somehow synced to another library, because I plugged the charger to a wall. How can I sync my ipod shuffle back to the original Itunes library without erasing my current data in the Ipod shuffle?

My ipod is somehow synced to another library, because I plugged the charger to a wall. How can I sync my ipod shuffle back to the original Itunes library without erasing my current data in the Ipod shuffle?

",the owner sold the ipod without clearing the songs and since the songs were not puchased from the itunes store then i believe i now own the songs"
Not true at all.
It does not matter where the songs came from, they are not yours and the previous owner does not own the right to distribute them to others.
The law is the same with downloads and cds and any other medium.

I have three different listings for Bob Seger on my iPod (bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?

I have three different listings for Bob Seger on my iPod (Bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?

Can you just create a new "Playlist", name it Bob Seger and drag what you want into the Playlist.
File/New Playlist

Can a change be made to the original Word document without losing form fields in a saved PDF form?

Similar Messages

Maybe you are looking for