Can a condition be used for SBR and SCS simultaneously?

Hi there
I have a requirement to charge a tenant a flat rate condition type against a settlement unit, and to include that same charge as part of the minimum (sales based rent).
The SAP configuration allows you to set the attribute of a condition to either 1001 (Minimum SBR) or 0002 (Fixed SCS) but not both simultaneously.
I need to raise one condition on the contract and include it in both SBR and SCS.
Is this possible?
Regards
Joe

Hello Joe,
Config 2 Conditions
1. A with 1001
2. B with 1002 Name it similar to A with suffix SCS or similar to diff.
On Contract create 2 Conditions, Condition A linked to Sales and Condition B linked to SCS. Choose Formula on SCS Condition B = % Share in Source Condition. Assign the Object which is same on Condition A and % share = 100% and choose the source Condition as = A. This will refer Condition B to A. Any changes on (Sales) A will automatically reflect on B. Of course the other parameters on A and B will be specific to respective Conditions and you have to be careful. You can put some restriction with validations too.
Background you can have your accounting for corresponding Condition types.
Hope this helps,
Jag

Similar Messages

  • Can Exchange activesync be used for calendar and contacts without BES?

    I thought it could- just got a Z10 and am having trouble syncing with a cloud service that uses EAS Tech support just told me that I have to be on BES for that? Wasn't what I thought. Knowledge base article KB34208 "Sync time frame for calendar events when using a Microsoft Exchange ActiveSync connection " Says nothing about BES in the Environment section? http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB34208&sliceId=2&cmd=displayKC&d... Hoping guy was wrong- I really need to be able to get my desktop info onto phone and this is convoluted enough- syncing to cloud and then to phone but want to keep the phone (4th BB and a PB). Help please.

    you dont need BES10. you can do EAS directly from the device to the Exchange Server.
    zeki

  • Can Boot camp be used for OS10 and LINUX ?

    reason i ask is this
    i found ONE application Popcorn3.that wont work right on Leopard
    but its fine on Tiger
    could i partition the Hard Drive on my MacBook to run Leopard /Tiger
    or Leopard / Linux ?
    or is it for Windows only
    what about old copies of boot camp for Tiger
    are they free?
    maybe i could do Tiger / Linux on my Mac Mini

    The only officially supported configuration is Mac OS X / Windows XP or Vista 32-bit.
    BUT, yes, you can successfully use other operating systems. I can tell you that I successfully installed Ubuntu on a second disk partition with no issue.

  • Can you change the units used for size and position in layout editor?

    Hello,
    In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor?  The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts.  I can't see any way to change this.  If anyone knows how it would be much appreciated.  Thanks!

    Aperture uses the unit settings defined in the System Preferences.  Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
    Merry Christmas!
    Léonie

  • When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified.  Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

    When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified.  Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

    The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
    tt2

  • HT5312 My recovery email is no longer in use, as it hasn't been used for sometime, and now seems to have 'expired', and I do not even recall being asked the security questions,so I can no longer download certain games. Please help.

    I cannot download certain games because I do not recall the answers to my security questions when it asks if I am 17 years or older. In fact, I do not even recall being asked these security questions.
    I tried to guess logical answers but now my iPad is threatening to lock me out. My second email is no longer in use as it has not been used for years and has seemingly expired.
    Can you please help?

    If you don't have access to your rescue email account, or you don't have one on your account (an alternate/secondary email address is a different setting/address), then you will need contact iTunes Support or Apple to get the questions reset (you won't be able to change/add a rescue email address until you can answer 2 of your questions)
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset you can then use the steps half-way down the page that you posted from to update/add a rescue email address for potential future use

  • Appleworks does not work with mountain Lion.  What can I use for drawing and painting?

    Appleworks does not work with mountain Lion.  What can I use for drawing and painting?
    MacBook
    Marian

    Please see this article which examines various possible alternatives to AppleWorks:
    http://rfwilmut.net/aw

  • Can Numbs app for iPad be used for iPhone and iMac?

    Can Numbs app for iPad be used for iPhone and iMac?

    I assume that you mean Numbers, in which case the iPad version can be used on the iPhone (if you've got the current version of Numbers then you will need iOS 5 on your iPhone). It can't be used on your iMac as that is a different operating system, you will need the Mac OS X version for that - but you can use spreadsheets created in Numbers on the iPad in Numbers on the Mac and vice versa.

  • My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

    My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

    I'm going to take a guess and say that if your TV has 2 HDMI ports, it also has a component input (5 wire).   I'm also going to guess that either your DirecTv or your Blueray has a component output option.  If I had this setup, I would put my DTV on the component option and use the open HDMI port for the ATV2.
    I doubt you will be able to tell the difference on your DTV.  Most of the stores that demo HD use component wiring on their store models.  The only downside is that you may be giving up the highest sound (Dobly 5.1 or whatever they call it.) 
    Or you could just go to switching the HDMI cords from your BluRay to the ATV2 depending on which one you are watching.  I think I use my BluRay about 5% or less of my viewing time.  If I "tossed", I wouldn't shed a tear.

  • How can I deploy EFS using Group Policy and automatically encrypt computers for ALL users who login?

    How can I deploy EFS using Group Policy and Active Directory with a goal to automatically encrypt computers for ALL users who login? (NOT an option for me to use BitLocker)
    I was asked to deploy EFS to encrypt the user my documents folder and profile on all of the users laptops. The laptops are in common areas (board meeting rooms, etc) and security of files is a must.
    I successfully created a recovery certificate in AD. I created an OU and setup an EFS policy and users can now login and select to encrypt their own files. The issue is that management would like to have automaticy Encrypt ALL users my documents AUTOMATICALLY
    when a user login.
    Can this be done?
    Please help

    Hi,
    Any update?
    Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Andy Qi
    TechNet Community Support

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • Condition type used for invoice list

    Hello Gurus,
            following condition type used for invoice list, why do they exit in invoice list:
             RL00    MW15.  LR00    RD01

    Hi,
    Please go through the below document
    When you work with invoice lists, you need to be familiar with the following concepts:
    Prerequisites for invoice lists
    Relationship to Pricing
    Structure of an Invoice List
    Changing header and item data
    Integration with financial accounting (FI)
    Prerequisites
    You can only process invoice lists if the following prerequisite data is defined by your system administrator in Customizing for Sales:
    Condition type RL00 (factoring discount) must be maintained and, if required, also the condition type MW15.
    An invoice list type must be assigned to each billing type that you want to process in invoice lists. The standard version of the SAP R/3 System includes two types of invoice lists: LR for invoices and debit memos, LG for credit memos.
    Copying requirements must be defined (for example, the payer, terms of payment and other fields that must be identical in the documents to be included in the invoice list)
    In addition, before you process an invoice list, you must maintain the following master data:
    A customer calendar must be defined, specifying the time intervals or dates on which invoice lists are to be processed.
    The customer calendar must be entered in the Billing Sales Area view of the customer master record.
    Pricing condition records for the condition type RL00 and, if necessary, (e.g. in Germany) the condition type MW15 must be maintained.
    Output condition records for condition types LR00 and RD01 must be created.
    Relationship to Pricing
    The system processes factoring discounts in invoice lists in exactly the same way as other kinds of pricing elements. The data for the factoring discount is stored in condition records. Controlling during document processing is carried out via condition types, pricing procedures and access sequences. This control data is defined in Customizing for Sales by your system administrator.
    For further information, see  Conditions and Pricing.
    Structure of an Invoice List
    An invoice list represents an individual billing document. It consists of a document header and document items. Each item represents a billing document that you have included in the invoice list. The header contains an overview of summary information, such as the net value of all documents in the invoice list, the value of the factoring discount, details of taxes, and so on. It also contains information on partners and output.
    Changing Header and Item Data
    You can change some of the header data - for example, the billing date - when you process the invoice list. You can change an item - either an individual or collective invoice - and display document details. However, you cannot change any data in individual billing documents once they are part of an invoice list.
    It is possible, however, to make certain global changes to output in all items in an invoice list.
    For further information on output, see  Communication in Sales and Distribution Processing.
    Integration With Financial Accounting (FI)
    The documents that you want to combine within an invoice list must already have been billed and forwarded to Financial Accounting. Here the billing documents intended for an invoice list are blocked for normal dunning transactions.
    The dunning block on FI documents is lifted as soon as you create an invoice list and transfer it to FI . The system then calculates the new dunning date for the invoice on the basis of the invoice list date.
    In addition, the system enters invoice list numbers in the FI documents as reference numbers. Invoice list numbers can then be entered for incoming payments.
    When you save the invoice list, the system automatically creates an accounting document for the factoring discount and possible taxes and posts it to the corresponding G/L account in FI.
    Regards,
    Murthy

  • Standard Condition type used for Manual freight at item level

    Hello Gurus
    Can you please tell me the standard condition type used for entering freight manually at header as well as item level.
    Warm Regards
    Prashant Joshi.

    Prashanth,
    The freight Conditions that we use in Sales are two types
    HD00 - Header Level, wherein we have no access sequence
    KF00 - Item level, Wherein we have access sequence  KF00 - Freight
    But you want the condition types to be maintained manually, then you need item details screen of the respective condition type HD00/KF00 using Tcode V/06.
    Inside that Manual entry as "C". Similarly you need to maintain or activate "Manual" Indicator in pricing procedure. Then you can enter the freight Manually.
    Note:
    The difference In applying at the header level and item level is if you enter freight value at the header level it is applicable to all items in the item level. But if you want to apply freight  we can give freight to each item or selective item.
    Regards
    Sathya

  • Condition type used for scrap

    hi,
    what is the condition type used for scrap in Standard SAP.?Assured points
    Best regards,
    R.Srinivasan

    Dear Srinivasan
    Follow the below process:-
    1)  Go to V/06, either copy the standard or create a new by naming ZTCS and maintain the following:-
    -  Cond. class::::::::::A
    -  Calculat.type::::::::A
    -  Access seq.::::::::::K004
    -  Manual entries:::::::D
    -  Item Condition:::::::X
    -  Text DetPrc::::::::::04
    2)  Again in V/06, create one more condition type (say ZECT) for Edu.Cess on TCS for which the same values can be maintained as like ZTCS
    3)  Go to OV34, create an Account key for TCS, say ZTC and ZET for Edu.Cess
    4)  Go to VK11, input the condition type ZTCS and maintain the required TCS percentage (the combination which you can maintain is for Sales Org / Dis.Channel / Material or as per the requirement demands you).   Similarly, you have to maintain the required percentage for Edu.Cess also in VK11
    5)  Now go to V/08, create a new pricing procedure exclusively for scrap sales and maintain these two condition types there with respective Account Keys
    thanks
    G. Lakshmipathi

  • I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?

    I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?  I need to disable the new e-mail address account so that I can add it as an additional e-mail to my old account.  THEN, how do I make this new e-mail address my primary e-mail for this old account?

    Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
    Next see:
    Frequently Asked Questions About Apple ID

Maybe you are looking for