Can a Core Duo (Late 2006) mac mini run 10.6?

Can a Core Duo (late 2006) mac mini upgrade to 10.6?

Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.

Similar Messages

  • Can I use my late 2006 mac mini as an external drive for my late 2012 mac mini?

    I have a (late 2006) Mac mini that I would like to use as an external drive for my (late 2012) Mac mini.  Is this possible and can anyone suggest what cables would be needed.  I am aware that the ports are very different i.e firewire and thunderbolt.  Thanks in advance!

    - You can boo the old Mac in Targe Disk Mode and connect the two via FireWire (FW) You will need a FW 400 to FW 800 cable or a FW 800 or FW 400 cable and appropriate adopters
    How to use and troubleshoot FireWire target disk mode - Apple Support
    - Use the old Mac normally and setup Disk Sharing and access the old Mac via the network. The old Mac's disk will show up  under Devices on the new Mac. One you set up the old Mac yo do not need mouse or keyboard or monitor. You can also setup Screen sharing and actually use the old Mac from the new Mac.
    - Remove the HD from the old Mac and place it in an external USB enclosure of dock and connect it to the new Mac

  • 2006 Mac Mini running mirrored display on display and HDTV

    I have an early 2006 Mac Mini.  Got a DVI to DVI/VGA splitter as that's the input my TV has(RGB VGA/3.5 audio).  Plugged it in and if I connect it to both my monitor and my TV I get nothing on the TV.  Unplug the monitor and the TV works.  Is there a way to get them to work while both plugged in?  I'm perfectly fine with mirroring. 
    On a side note, I know the max for VGA is going to be 800x600, but it doesn't fill up remotely anywhere near the full screen.  Is there a way to stretch that so that it does that? 
    I just want this to be able to power the display so it can be used and also be able to stream things to my TV, preferably without constant switching of the splitter for the ease of other users. Anyone have any thoughts?  And no, I don't want to spend the money on the Matrox system.  Thanks for the help.

    Now what if I bought a DVI to VGA to connect from the DVI split side into my monitor via VGA, would that work?  Or will it being split into VGA and DVI already screw it up and I therefore need to just get a straight DVI to dual VGA splitter?

  • How many screen monitors can I use with late 2009 Mac Mini?

    hey guys. I have a Mac mini from late 2009 that is connected with 2 screen monitors, and I was wondering if I can add another one through one of the usb ports? If so, can I use a usb to vga adapter to plug it in? thanks for any answers!

    You can add multiple USB monitors or USB video adapters, but realize that USB video is usually quite a bit slower than "normal" video cards.  So don't display Youtube or other moving video on the USB device.  Me personally, I have a Mimo 7" USB monitor and I have my calendar displayed on that.
    You can also get the Matrox DualHead2Go or TripleHead2Go to add more monitors to a single video port.  It has much better performance than a USB video adapter, but of course costs quite a bit more.

  • How can I find out if my mac mini running snow leopard can be upgraded to mountain lion?

    I have a mac mini with sufficient ram for the mountain lion OS however, I am unable to determine if the machine was created in early 2009.  Is there a way to make sure my machine will take the upgrade without purchasing the operating system first?

    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • How can you find serial number on mac mini running bootcamp Windows 7?

    I am using a Mac mini and it is running bootcamp Windows 7, and I want to be able to look for the serial number using the Windows 7 side without booting up to the Mac OSX partition. can anyone help me out with this?

    I don't think there is a way to get the Mac serial number in Windows. You could carefully lift up the Mac and look at the printed serial number on the outside of the Mac without having to turn off the computer, otherwise it would be necessary to boot in to Mac OS X.
    If you still have the physical packaging the Mac came in the serial number would also be printed on that.

  • HT4854 Mac App store won't let me re-download Mountain Lion on a Late 2012 Mac mini, says computer is incompatible.

    I have a brand new late-2012 Mac mini running 10.8.2. I'm trying to re-download ML from the App Store to create a bootable USB recovery key just in case. I'm being told that I can't DL Mountain Lion because my computer isn't compatible. How can that be?!
    Part of the reason I want this key is the fact that I just jumped through 5,000 hoops to recover Mid-2011 MacBook Air from the recovery partition. The installation kept giving me an error. EXTREMELY annoying. I had no key. It set me back a few days. I don't want this problem to happen again.
    I have a valid purchase, I own the software, I should be able to download it, period.

    Well said.
    If I follow the advice of the fellow above and download the installer via Internet Recovery, I'm not going to be given access to the installer for the sake of making my key—or will I? At want point in that workflow will I have the opportunity to boot to back into my already working OS (on the 2012 mini) in order to do what I need to do?
    I have access to a most recent release (2012) 13" MacBook Air (FWIW, the 2011 MacBook Air in question above happens to be an 11"). Am I likely to run into the same problem as with the 2012 Mac mini, where the version in the App Store still hasn't been "synced"?
    Unbelievably annoying. Worse still is while I'm stuck in self-help purgatory, if something were to happen the recommendation would be to visit the Genius Bar. It's not a bad service, but why should I have to rely on it if I'm perfectly capable of taking care of everything myself provided the correct tools are at hand?
    Incidentally, what happened with the 2011 MacBook Air is that the stock hard drive was formatted prior to sale. The recovery partition was left intact. I used it to begin the reinstallation of the OS. It was working fine until I realized I didn't have enough time at the moment to continue to download the required assets. The computer needed to be transported 200 miles away and time was of the essence.
    I cancelled the installation with the intention of revisiting it when I got to my destination. When I did so, even after freshly formatting the drive again in Disk Utility, I got an error right as the download began. No amount of tries made a difference. Same error. The only thing that will work, obviously, is a USB key or the equivalent with the installation files pre-downloaded—unless someone here has some other insight.
    Thanks so much to all.

  • I have a late 2012 mac mini with an i5 2 core can I replace it with an i7 quad core?

    I have a late 2012 mac mini with an i5 2 core can I replace it with an i7 quad core?

    A few places online may still offer the i7 2.3GHz quad-core Late 2012 MINI (Oct 2012 to Oct 2014)
    that allows the user-upgrade of RAM to 16GB, and this one I've seen is a Server model and has
    two 1-TB Hard Disk Drives. The B&H store in NY online has this listed, if in stock now, price &
    shipping in continental US is good until tomorrow.
    Your i5 dual-core is still desirable to many, & you may be able to resell it if not needed.
    Good luck & happy computing!

  • Can't download/install on upgraded 2006 Mac Mini

    I have a c 2006 Mac Mini which I have recently upgraded with a Core 2 Duo processor and 2 GB of RAM. The Mini currently runs OS X v. 10.6.8. I bought a copy of OS X 10.7 Lion from the App Store. Even though my Mac now meets the minimum requirements for Lion, the App Store says my Mac is incompatible and won't download the Lion software.
    Interestingly, the error messages I get from the App Store from my attempts to purchase/download 10.7 and 10.8 are different:
    When I tried to buy and download 10.8 Mountain Lion, I get "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer.". When I tried to buy and download 10.7 Lion instead, I get "This version of Mac OS X 10.7 cannot be installed on this computer.".
    Is there any way I can force this install to start?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get the questions reset
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Mac mini Intel Core Duo fan very loud and runs at high speed all the time.

    I purchased an "Open box" Mac mini Intel Core Duo, 1.66Ghz, 2G ram, 80G HD and SD a few days ago from Fry's.
    It runs beautifully except the fan is very loud compared to any Mac my family has ever had. It is so loud that we were thinking of putting it under the desk.
    The fan runs constantly, and I mean all the time, at a high speed. You can really feel the air coming out the exhaust vents. The case is always cool to the touch as is the exhaust air.
    My aunt bought a similar Mac mini (But only 512Mb ram) the same day. Her's is very quiet. The case feels just slightly warm, not unlike other Mac mini's I've seen.
    Should my Mac mini's fan be running this way?
    Thanks,
    llulua
    BTW: The "open box" was sealed with a Fry's label and it said that this had a new warranty. Yet, checking the serial number, it said that it had about 260 days left. I guess Fry's is backing it?
    Also, someone told me that perhaps the main wire from the fan to the logic board is disconnected.
    eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram   Mac OS X (10.4.8)  
    eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram   Mac OS X (10.4.8)  

    Since you have 2 gigs of memory, my thoughts are that when the party (Fry's or the origianl purchaser) upgraded the memory, they neglected to reattach the wire at the front of the Mini under the IR receptor at the right front corner that regulates the fan speed. This wire must be unattached in order to upgrade the memory, and is probably why the original person brought it back, because of the fan noise resulting from failing to reattach the wire. If that wire is left unattached, the fan runs continually at high speed to protect the CPU and system in general. If you do not want to use a putty knife to open the Mini, take it back to Fry's and ask someone who is Mac savvy to open it and reattach the small plastic receptacle at the end of the wire into its socket at the right front of the machine. When I go to Fry's, I am always concerned because the employees allow people to pry keys off of the Apple notebooks, so don't expect that their employees to know or care about anything Mac.
    Al PB 12" 1.5   Mac OS X (10.4.5)  

  • Will 1.86ghz Intel Core Duo Mac Mini run the IPhone SDK?

    I kinda asked this as a follow up in another thread. But I really should have asked it in a separate thread here.
    Will a 1.86ghz Intel Core Duo Mac Mini run the IPhone SDK?
    Additionally, it comes with 10.4 and IPhone needs 10.5.4 or better. Can I download and upgrade to 10.5.4 free from Apple or will I have to purchase the upgrade?
    Jerry

    The hardware is more than sufficient. You will have to buy 10.5 (Apple does not have upgrade pricing).

  • HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

    Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

    Hi, I can't see why not...
    Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
    http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

  • I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

    I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

    Hi there,
    The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
    AJ

  • I have a late 2012 iMac and a late 2009 mac mini.  I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.

    I have a late 2012 iMac and a late 2009 mac mini.  I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.
    According to Cruicial my mac mini could use:
    Module Size: 8GB Kit (4GBx2)
    Package: 204-pin SODIMM
    Feature: DDR3 PC3-8500
    Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64
    Also According to Cruical my iMac uses:
    Module Size: 8GB Kit (4GBx2)
    Package: 204-pin SODIMM
    Feature: DDR3 PC3-12800
    Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V
    I want to increase the ram in both computers. 
    So,  can I put the iMac ram in my mac mini and then I'd only have to buy ram for my iMac?  Naturally the ulitmate test will be when I actually install it,  but having an expectation of success or failure will allow me to plan on what to spend money on.
    Thanks,
    Bear

    Thanks for the responses.  I probably wont even try as my priority is Ram for the mac mini.  2 is not enough.  8 for my imac is okay for now. 
    Somewhere I thought I'd heard that faster Ram would simply clock at the lower speed.  It seems that I am incorrect.
    Thanks,
    Bear

  • Can i use 2gb memory in one slot in my 2006 Mac mini as the 2 slots of 1gb only reports only 1gb memory, both memory work ok in the one slot

    Can I use 2gb memory in one slot in my 2006 Mac mini as the 2 slots of 1gb only reports as 1gb memory, both memory work ok in the one slot as I have swapped them over

    To my knowledge 1GB modules are the max. size for the 2006 Mini.
    2GB modules are not recognized/useable.
    Sorry
    Stefan

Maybe you are looking for

  • ACS 4.2 services not working

    The server is running with Windows 2003 SP2 and due to some issue it got rebooted. After reboot all services stopped working. CSAdmin, CSMon and CSRadius hanged in Starting state and CSLog in Stopping state. When i chaged the startuptype to manual an

  • How do I create a hyperlink to open a document in a new window?

    My operating systems is: Windows 7 Using Adobe Acrobat Pro XI I have created a user guide in MS Word 2013 which contains hyperlinks to other documents. I print to PDF but the hyperlinks are no longer accessible as they are converted to text once the

  • XML Data Mapping Disappear when Reopening xlf - Xcelsius

    Hi,,, I have created one xcelsius with XML Data maps which works fine. But when I re-open this XLF, the XML data mapping disappear from XML source screen of Excel. It's so much enoying, so every time when i re-open the xlf. I have to map xml data aga

  • Why can i not open mobi formats

    Why can i not open mobi files with adobe

  • N-able: Allowing a remote site to launch an application

    Greetings, I am new to OSX so this hopefully will be an easy question to answer. We use a remote management software at the company I work for with allows for the software to launch RDP when connecting to a remote machine. The default settings are fo