Can a crossfade transition apply to video only, not audio?

I want to have a Cross dissolve transition, but that does not affect the audio. Is this possible without extracting the audio?
What I mean is the video will have a croos dissovle transition, but the audio just goes straight into clip 2 with no audio crossfade?
Thanks

Tom Wolsky wrote:
If you double click the audio portions to expand them and then add the cross dissolve the fades won't be added to the audio. Maybe that's what you meant by extracting.
Yes expand = extract audio = detach audio, different words for the same thing.
What I want is to be able to add corssfades without expanding (extracting or detaching audio) so that it only applies to the video. Thanks I'll investigate that link.

Similar Messages

  • In v.11, how can I capture video but not audio from a camera?

    In v.11, how can I capture video but not audio from a camera?

    Rodney
    I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
    If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
    1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
    a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
    or
    b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
    Publish+Share/Computer/AVI with Presets = DV NTSC Standard
    Please let us know if any of that worked for you.
    Thank you.
    ATR

  • Not seeing the main display for video only getting audio...no visual

    can anyone help....not seeing the main display for video only getting audio...no visual

    Hi
    You must tell - What Video-codec is material ? (What Camera was used - how was it set ? )
    Try to supply much more info that set's us up on track. (Mind-reading is way to hard)
    Yours Bengt W

  • Pick only video and not audio to edit in timeline

    How can I only move the video and not audio to the timeline when I pick a clip I want?
    Everytime I drag it to the timeline it brings the audio and video and I have to unlink it and then delete the audio.

    Disconnect the audio in the patch panel at the left end of the Timeline window. Click the a1 and a2 source tabs to disconnect them from their destination tracks (A1 and A2 by default).

  • Video only playing audio

    On my PC (Windows7 and ITunes10.6), my music videos only play audio.  It did play both video and audio, but currenly only audio is working.  Any advise is appreciated.

    See if this article will help:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718

  • Purchased music videos only play audio

    I have about a dozen of video clips I bought on iTunes.
    None of them now play in video mode. Only the audio. I rechecked the authorization. Everything is fine.
    I can play other video clips not purchased on itunes. And I can also play the movies I bought on itunes, and others as well.
    I thought this could be a problem with my hard drive being replaced two weeks ago, and reinstalling everything through system dvd that came with computer + Time Machine back up, but I also downloaded the most recent "free video of the week" and it only plays in audio mode as well.
    Anybody has a clue?

    found a temporary solution, but it still strange. for each clip I did "get info" and changed the media type from "video clip" to "films". Now they play just fine.

  • Airplay: Can I mirror video but not audio, i.e. listen thru a headset?

    Airplay works great. But I want to figure out how to listen through  a headset connected to my MacBook while video is mirrored on TV.  i can't seem to have Airplay mirroring on and have sound output to my headset.

    Rodney
    I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
    If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
    1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
    a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
    or
    b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
    Publish+Share/Computer/AVI with Presets = DV NTSC Standard
    Please let us know if any of that worked for you.
    Thank you.
    ATR

  • What can i try  if i get video but no audio

    the audio portion does not play  i am playing an mpg file I purchased a thempeg2 playback component

    the audio portion does not play  i am playing an mpg file I purchased a thempeg2 playback component
    The QT MPEG-2 Playback Component is a video only codec. Like all other video codecs, it does not handle audio. Download the free MPEG Streamclip app and open your file in this app. The file will probably play correctly in its player or you can use either the "Demux to M2V w/AIFF" or "Convert to MPeG-2 w/MP2" option to make the data compatible with the QT X and/or QT 7 players. These options keep the original video data and only change the audio data to make it QT compatible.

  • Dynamic Link After Effects to Premiere (Video Only, No Audio)?

    Can you Dynamic link an After Effects file so that audio does not interleave into the premiere pro project?   I just want to link the video part of the comp and do not want audio data in my asset.
    *I already know that I can double click the asset in premiere and drag video only from there.   I want to strip audio from the after effects linked asset so when i drag the asset from the bin to the timeline it will not try to add audio also.
    Thanks,
    Cliff

    If you unlink the audio and video in Premiere Pro
    Then you select only the video layer to replace with After Effects Composition
    You'll end up with the Audio automatically turned off in AE when the dynamic link composition is created.
    You get the same result if you leave the audio layer linked but you lock it before enabling the dynamic link.
    The advantage to doing this is that you don't have to mess with audio in After Effects. There is no additional disadvantage to locking or unlinking the audio track because any time you replace elements in PPro with AE compositions the Audio and Video are unlinked. You'll need to re-link them if you plan move the tracks around at all because you loose the out of sync warnings that you'll normally get.

  • Capturing video only- no audio

    Hello- I have sound when I play back the tape in my video camera-but when I capture to FCE there is no sign of the audio and no audio upon playback. I put in a tape that I captured successfully from before(including audio) and same problem with that capture- no audio...
    I tried changing to "Canvas Playback"- no difference.
    Any help would be greatly appreciated.-Thanks.

    Hello- No sound waves. One thing I checked and am not sure of-in "system settings"-Scratch disk-there are 4 headings of "Video capture", "audio capture", "video render" and "audio render"
    Three of them are checked off- except "audio capture" this box is grayed out and I can't make it active. Is this the issue?
    Other things seam a little buggy also... I'm wondering if I need to reload the software?
    Thanks...

  • When i upload a video only the audio works

    I am uploading a video bumper into Imove and when I do only the audio works and I lose the video. Any suggestions.

    format: H.264, 1920 x 1080, millions AAC, 2 challenls, 4800 HZ
    FPS: 29.97
    Data Size: 4.9 MB
    Data Range: 2,985.31 kbit/s
    Current Size 1264 x 711 pixels

  • Reconnecting video but not audio

    I moved my original video files onto an external drive and then when I attempted to reconnect the files again it only connects the video part of each lost file and the audio of the same video clips remains greyed out when viewed from the timeline.
    Obviously this has something to do with the fact that my FCP capture scratch folders for audio and video of the same clips are different. I'm not sure how I end end up with two separate files so my first question is how can I get video and audio to be captured into just one file like I used to and much prefer?
    Secondly how do I reconnect my audio again? Each time I run reconnect media it automatically tries to connect the video aspect and ignores the audio.
    Enock

    In System Settings, Scratch disk tab and deselect 'Capture Audio and Video to Separate files'
    This will stop FCP splitting the captured clips.
    As far as I know, you must reconnect the files separately. In the reconnect files menu, they should be listed as 'Clip Title' -v and 'Clip Title' -a. Firstly, reconnect the video files, then reselect clips to reconnect audio and make sure the OFFLINE option is selected in the 'Files to Connect' options to display only the audio files for reconnection.

  • ITunes burns data cds only, not audio cds (CD diagnostics included)

    I am unable to burn audio cds in iTunes but I can do so using other software. iTunes will burn data cds (not playable in most of my cd players) but not audio cds. iTunes freezes after "checking playlist" (CPU usage 100%). I followed all the troubleshooting tips in iTunes "help burning CDs."
    Thanks for your help. My cd diagnostics appear below:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway E-6000
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: ASAPIW2K (6.0.2.0), Cdr4_xp (5.3.2.35), MxlW2k (1.0.1.106),
    UpperFilters: pwd_2k (5.3.2.35), Cdralw2k (5.3.2.35), GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce4 Ti 4200\GeForce4 Ti 4200
    IDE\DiskWDCWD800BB-53CAA1_____________________17.07W17, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVDRAM_GMA-4020B_______________A105___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomVOBID__InstantDrive_CD_14_, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: HL-DT-ST DVDRAM GMA-4020B, Rev A105
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12.
    The drive CDRW speeds are: 4 8.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    The last failed data CD or DVD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRAM GMA-4020B on DVD-R media at speed 0X.
    Gateway pentium4, 2.53 GHz, 768MB RAM   Windows XP  

    I then close the dialog box. But when I open it again, the radio button is again selected for the Data files.
    just doublechecking something ... how are you closing the preferences tab? (by clicking the OK button down at the bottom right of the preferences tab, or in some other way?)

  • Capturing video but not audio!!!

    when I capture a film from a camera, the audio does not get captured!
    the movie is ok, but audio is missing!
    I can see in the settings that video and audio is captured!
    could it be that the settings on the camera are wrong?
    i don't understand it! please help!

    How to ask questions the smart way

  • How can I match sound quality between video clips and audio clips?

    Hi guys,
    First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
    1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
          but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
    2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
          recorded at the same time, the voice quality should match.
    This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
    So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
    Please help, all of you experts.

    Thank you.
    OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
    My process is this:
    1. The whole video and audio narration material is shot in one continuous video sesseion.
    2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
    3. In Premiere Pro 5, I select render and replace in SoundBooth.
    4. In Soundbooth, I choose Add Multichannels.
    5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
    6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
    7. Next I edit the stereo channels as needed.
    8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
    9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
    10 On the timeline, I proceed to cut apart this single stereo wavelength .
    11.These clips are saved as Video, or Audio subclips.
    12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
         The summary says that this is saved to MP3 Stereo.
    13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
    14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
    I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
    I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all.

Maybe you are looking for

  • Error logs while creating New strucuture

    Hi, I'm creating new structure for example z_structure.I have 16 fields inculded in it which has some already existing data elements.And all my 16 fields tech specs are based on this data elements.Now my problem is in curreny/quantity fields i'm givi

  • Why did my iPhone (not PCs) suddenly require a change in POP/SMTP server spec's for one (only one) of my email accounts?

    Hello! Why has my (iPhone only) POP and SMTP settings suddenly changed for one (oddly only one) of my email sub-accounts? -It changed from "incoming.verizon.net" and "outgoing.verizon.net" to pop.verizon.net and smtp.verizon.net, respectively, ALL BY

  • In MD06, how to define Traffic lights

    Hi to All, We are having more than one plants and every one are using MRP. After MRP run, we are using MD06 in order to evaluate numerous materials based on same controller. I would like to define or set traffic lights based on Supply & exception gro

  • Error with RZ20 Status

    Rz20 - CCMS alert Hi Experts, We have problem with RZ20 where the belw mentined status are not updated and instead it is giving system name (PME).  Please help me DB Backups      R/3 DB Status       This database was last backed up successfully PME d

  • Can't see Service Interfaces in SE80

    Hi All, I have a issue - not able to see the Service Interface that I created in Enterprise Service Builder. This is what I did: 1) Created a Service Interface including Message types and GDt's in Enterprise Service    Builder. 2) I, then activated a