Can a device still backup to iCloud after being disabled?

Ok so my phone is disabled.
I'm about to erase the phone through icloud.com, and it showing as online.
Now I know it's not connected to cellular data because I don't have data for the time being. So it must be connected to wifi still.
So I'm wondering if anyone has tried to see if a device will still back up to iCloud in this state.
The device hasn't backed up in months because I did not have storage.  I can purchase icloud storage from my other device.
It's worth a shot but as long as the device is "locked", connected to wifi and plugged into power, and I add storage, it would seem I can still get it to back up before erasing it right?
Has anyone ever tried this before or given it any thought?

bump

Similar Messages

  • HT5262 I can see my old backups in icloud why can I not restore them to my phone they do not appear as an option when I click on restore

    I can see my old backups in icloud why can I not restore them to my phone they do not appear as an option when I click on restore

    Hi, Samanthacarol.
    If you are able to see the backup file in iCloud but unable to restore from the backup, then the article below will explain the solution. 
    iOS: Unable to restore from backup of a newer device
    http://support.apple.com/kb/TS3682
    Cheers,
    Jason H. 

  • My iPhone 5S is using 2.5GBs of storage for the camera roll.  I deleted all but 190 photos and this did not change.  My other devices cannot backup to iCloud due to the volume on my iPhone.  Any ideas?

    My iPhone 5S is using 2.5GBs of storage for the camera roll.  I deleted all but 190 photos and this did not change.  My other devices cannot backup to iCloud due to the volume on my iPhone.  Any ideas?

    Try turning off the Camera Roll option in Settings>iCloud>Backup & Storage>Manage Storage>Your device. Then turn it back on again.
    Cheers,
    GB

  • Can iPhoto Videos be backup to iCloud?

    Can iPhoto Videos be backup to iCloud?

    From your camera roll, yes >  iCloud: iCloud storage and backup overview

  • My iPod was restored after being disabled.  I am trying to sign into iCloud to load my back-up on the iPod.  I can't sign in because the sign-in always times out.  Why is this?

    My iPod was restored after being disabled.  I am trying to sign into iCloud to load my back-up on the iPod.  I can't sign in because the sign-in request always times out.  Why is this?

    If you do not have access to the primary email of the Apple ID then the only other option to reset the Apple ID password is by the security questions.
    - go to https://appleid.apple.com
    - select Reset your password
    - enter the Apple ID email and press next
    - select Answer Security Questions

  • I have just restored my ipod touch after being disabled.  Now it is asking for pasword, can I cancel this so I don't have to use a password?

    I have just restored my ipod touch after being disabled. Now it is asking for the passcode?  I still cant remember the passcode.  How do I go past this?

    You'll have connect in recovery mode and set it up "as new ipod" http://support.apple.com/kb/HT1808
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
    If the issue continues after updating and restoring your device, refer to this document.
    copied from http://support.apple.com/kb/HT1212

  • How can I get a family member back after being removed from family share?

    How can I get a family member back after being removed from family share?

    See [[Replace your Sync information]] but read the cautions carefully.
    * also see [[firefox Sync is not working]]
    It is always a useful precaution to make manual bookmarks backups
    * see [[Backing up and restoring bookmarks]]
    The above article also explains about the autobookmark backups that firefox generates, but be sure to make manual backups as you work, it is very easy to overwrite the wrong set of backups.
    I am not entirely certain what firefox is doing in your case, perhaps the synced Netbook does not have the expected set of bookmarks on it.
    Presumably sync may be uninstalled or disabled like any other add-on
    *see [[Uninstalling add-ons]]

  • HT202639 I have updated iOS to my 4S. My Wifi still continues to drop after being checked out. What do i do now?

    I have updated iOS to my 4S. My Wifi still continues to drop after being checked out. What do i do now?

    I'm not sure what you mean by "checked out." See: If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support

  • Can you make core center automatically close after being called on startup?

    Can you make core center automatically close after being called on startup so it can set cpu fan speed to a slower fixed speed then exit?
    If core center really cant do such a simple task then can speedfan or another program?

    Quote from: bassmadrigal on 13-July-05, 07:42:36
    Why don't you want them running. Speedfan has a very small footprint.
    Just seems unnecesary seeming as it does its task as soon as it runs and its changes then stay applied. Speed fan is probably better but core center takes 10mb.
    Quote from: syar2003 on 13-July-05, 07:57:02
    You dont have to have it running to set a user specified fan rpm .
    Once it's set it is stored in the corecell/cmos chip on the motherboard .(until a cmos reset) .
    So to answer your question .
    There is no need to have it autostarted at each boot ...
    Thats how i have used it .
    Only reason to have it running is with MSI's "CnQ" control of the fan , varies with the load of the processor
    Thats strange for me the speed resets to default as soon as I restart my pc (about when the bios engages which is however tangibly after the graphics card fan revves up to its full speed). Depending on the temperature of the proccessor it goes to 3300rpm (less than 42c) or 4500rpm (too loud for ~45c IMO and MSIs "cool&quiet" option seems to agree, it doesn't even set it as high as 3300rpm)

  • FIM Sync service keeps restarting after being disabled

    Hi - We are deploying the SharePoint User Profile Store connector and I have followed all the steps here:
    http://technet.microsoft.com/en-us/library/dn511003(v=ws.10).aspx
    However the FIM Sync service keeps enabling and restarting itself - can't see anything in the event logs except a Evt ID: 2001 - Service was started successfully
    What is starting this service? How can I stop so that it remains in the disabled state?
    Thanks
    J

    Hi,
    Based on your description, my understanding is that you want to disable the FIM Sync service, but FIM Sync service keeps restarting after being disabled.
    I suggest you start the FIM Sync service again and stop it, then disable it.
    You shouldn't need to start those services manually - SharePoint will do everything itself when you start the User Profile Sync service in Central Administration.
    Restarted the User Profile Synchronization Service in Central Administration.(Central Administration -> System Settings -> Manage services on server -> User Profile Synchronization Service.)
    Stop the FIM Sync service and then disable it.
    Here are two links, you can use as a reference:
    http://serverfault.com/questions/147738/not-able-to-start-forefront-identity-manager-service
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact 
    [email protected]

  • Malicious TornTV add-on continously returning after being disabled- How do I fix this?

    I've been having issues with an add-on to my browser by TornTV that continuously returns after being disabled via the link provided on the ads it invasively opens and via the Add-on Toolbar. I've done the process many times and even sent a formal request to the TornTV website to stop after discovering I cannot remove it permanently only to receive no answer or conclusion.
    It wouldn't be such a big issue were these ads not slowing my browser considerably, crashing it entirely, or generally getting under foot while I'm doing work on the internet; I was just hoping that you might perhaps have a solution to this issue.
    Thank you very much!

    hello, please try to run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] which are specialised in removing adware and browser hijackers.
    [[Troubleshoot Firefox issues caused by malware]]

  • My iPhone will not automatically backup to iCloud after iOS7 install

    My iPhone 5 will not automatically backup to icloud anymore now that iOS7 has been installed. Steps I have tried so far...
    Installed iOS7 through Software Update - relazed three days later that the phone was not backing up
    Did a manual backup
    Erased the entire phone
    Restored from iCloud backup
    Then reset all phone settings
    Signed out of iCloud, deleted all data and then signed back in
    Is anyone else having this issue after updating to iOS7?

    my dear friend i have like your problem before and when i see alot of solution i find the one it work with me and
    come autmatic again
    take the solution:
    Note that a manual backup also factors into the automatic backup schedule, meaning the next automatic backup will not occur until  48 hours later.
    Actually the iCloud backup process sounds a bit more complicated than it actually is in practical use. You can’t schedule iCloud backups manually, but you don’t need to do so as iOS takes care of this for you, and it’s designed to be pretty transparent.
    Once enabled, iCloud backups will run automatically whenever the following conditions are met:
    Your device is powered on,
    Your device is connected to the Internet via Wi-Fi,
    Your device is connected to a power source,
    Your device has the screen locked (i.e. turned off), and
    It has been at least 24 hours since the last successful backup occurred.
    In other words, your device may not be backed up to iCloud at the same time every day, but once 24 hours has elapsed the iPhone will make a backup as soon as it is plugged in and on Wi-Fi with the screen off. For example, if your iPhone backs up to iCloud at 10:00 pm tonight, but you don’t plug it in while on a Wi-Fi connection until midnight tomorrow night, the next backup will occur at midnight—basically as soon as you plug it in—and future backups will continue to run at midnight on subsequent days as long as the iPhone is plugged in, connected to Wi-Fi, and has the screen off at that time. If you’re working an irregular schedule and coming home at different hours, this may gradually push the backups to later at night, but the backup won’t be skipped if you miss the time window—it will still occur as soon as possible once all of the other conditions are met.
    This does of course mean that sometimes backups can get pushed to the point where they may be delayed until the next night; come home at 10 a.m. on a Sunday morning and plug in your iPhone and that’s when your next backup will occur, but if you leave for work on Monday morning at 9:00 am and your phone isn’t plugged in and on Wi-Fi while at work, you won’t get another automatic backup until you get home and plug it in later that night.
    You can check the time of the last successful iCloud backup by going into the Settings app on your iPhone and choosing Storage & Backup from the iCloud section.
    You can also tap the “Back Up Now” button from this screen to create a manual iCloud backup at any time. To create a manual iCloud backup, your iPhone only needs to be on Wi-Fi, it does not need to be plugged in or have the screen off.
    Note that a manual backup also factors into the automatic backup schedule, meaning the next automatic backup will not occur until  48 hours later.
    This can be one method for adjusting to a specific backup time if you really feel the need to, but it’s largely unnecessary as iOS should naturally settle into a standard backup routine as long as your iPhone is regularly plugged in and on Wi-Fi for at least a few hours each day, such as while you’re sleeping.
    As one last note, it’s also worth keeping in mind that the iPhone only needs to be connected to power with the screen off to start an iCloud backup; once the automatic backup has started, it will continue as long as the iPhone remains on a Wi-Fi connection, even if you unplug the iPhone or begin using it.

  • I can't delete the backup from icloud.

    Change my iphone4 to iphone4s,use the same icloud ID.
    I restore the iphone4 backup from icloud to my iphone4s,and the iphone4 will not use any more.
    Now,I can see two devices' backup in my icloud.
    I try to delete the iphone4 backup from iphone4s,but failed may time,why?

    I have the same scenario. Few days ago replaced my iphone 4 and got a new 4S. initially i logged in with the same apple id and restore from the iphone 4 backup..That gave me some glitches so i restored the phone and decided to setup as a new device. So now i wanted to delete the iphone4 backup from icloud. I've been trying from the phone and the icloud control panel and still not able to delete it. It gives an error that itrs being used to restore a device or is in use.
    I've tried all sorts of combination, deleting from the ipad, iphone, turning icloud back on/off,, iheck i even went as far as to delete my icloud account but that doest do anything. When i recreated the account, all my data was still there,, Seems like there is no way to delete your data once on the cloud!!!!

  • How can I get old Backups from iCloud?

    I used to have two devices with the same iCloud account. One of the devices broke, and it was reseted to the original, so I lost all my notes. Then the notes on the iCloud backup disappeared too. How can I get them back?
    I used to have really important notes on the backup and I could see them in icloud.com, but now I can only see the notes of the other device in the icloud.com.

    Unfortunately, I don't believe notes are included in the iCloud backup since they are synced to your iCloud account.  The icloud backup includes:
    Photos and videos in the Camera Roll
    Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
    App data
    Home screen and app organization
    Messages (iMessage, SMS, and MMS)
    Ringtones
    Visual Voicemails
    Reference http://support.apple.com/kb/HT4859.

  • Can't find iPhone backup on icloud (only shows iPad backups)

    Setting up new iPhone 5 from icloud (previous one lost). Updated iOS (previous iPhone had iOS 7) but can't find iPhone backup (only shows iPad backups); however, I can see all my contacts on iCloud.com. Can all my contacts be there without having made any iPhone backup on iCloud? iPad is on 6.1.3

    hi,
    Maybe you can try some data recovery program to search your iPhone backup files. These kinds of data recovery programs
    for example, iPhone Data Recovery, are designed to help users to find back and recover their lost files.
    I suggest that you run this kind of software, and then choose the 3rd mode in the software to retrieve all of your iCloud backup, I guess you can see your iPhone backup there.
    With such awesome software, you can also recover deleted or lost iPhone data.
    Good luck, friend.

Maybe you are looking for

  • Error Message on Web Premium Suite while opening Acrobat that Adobe Acrobat was installed as part of a Suite

    Can not open Acrobat Pro 9 out of my adobe creative suite 4 web premium.  Keeps giving an error message. Adobe Acrobat was installed as part of a suite.  To enable Adobe Acrobat start another component of this suite.  I am running Windows 7 64 and al

  • Is there a way to do a content-aware rotation?

    I have some objects in the edge of a wide-angle shot and there is the expected distortion. The b/g is pretty simple and instead of losing the space from fixing distortion, a content-aware rotation would be ideal. Is there a mechanism for this? There

  • How to find List of Erroneous Workitem for single user

    Hi Experts, I need to develop an application to find out Erroneous work items for each user. Is it possible to develop an application using GP API ??? Please give any valuable inputs to my problem. Regards, Satya.

  • Error while checking order status

    Hi, Whenever i try to check my order status i get presented with a page which looks like this. Something went wrong with your request. Please try again later. Is this an issue from my end or is this something to do with the apple store? when can i ex

  • How to setup Datasource to use data triggers in Data Template

    hi all, Pls. let me know the process how to setup dataSourceRef that has to be mentioned in the data template tag for making use of various data triggers? I have packaged function which will create a temporary table that I am using in my main query.