Can a Directory server be registered under 2 Directory proxy?

Hi,
Is it possible to register a directory server under 2 proxy servers?
===========================================
Proxy Server 1 Proxy server 2
| |
|---------------------->DS 1<-----------------------|
|---------------------->DS 2<-----------------------|
There will be just one DSCC application that will control this set up...
Thanks.

Usually this is required for proper fail over between two DPS so that if one fails the other can still serve the traffic. Typically, in this kind of setup, a hardware load balancer would be in charge of doing this one layer up the chain, like:
HLB1  -----> DPS1 -----> DS1
        X           X
HLB2  -----> DPS2 -----> DS2each directory server needs to be added as an ldap-data-source in an ldap-data-source-pool in both DPS1 and DPS2
cheers.

Similar Messages

  • Hi there I lost my password for my original iTunes account I can't recover it because the email address it is registered under is not longer valid How can I access my old account?

    Hi there.
    I did a factory restore and then restored it with iCloud back-up. I have been using lots of Apple products and i have used three different email adresses. Almost all apps restored perfectly but everytime i try to play a song in the Music app, i asks me for a Apple-ID i had no idea i have used.
    Hence:
    I lost my password for my original iTunes account
    I can't recover it because the email address it is registered under is not longer valid
    How can I access my old account?
    Can't find a place to change the email address to my new one without the password which I no longer remember.
    There is no way to just erase Apple-ID's on my device either.
    What to do? Should i ju give up and start from scratch and delete 2 years of stuf?
    Cheers!

    If you can remember the answers to the security questions when you set up that account - I think that you can reset the password without needing email authentication. You can try it here. Read it and see if it's possible. But if you can't remember the answers to the questions it will not work.
    http://support.apple.com/kb/ht1911

  • HT2731 can i have more than one apple id on a computer? As when we go away we want to facetime from our macpro to our main mac at home and both are registered under the same apple ID. Thanks

    Can you have more than one apple id on a computer. We are going away and want to facetime from our macpro to the mac computer at home but both are registered under the same apple ID. What should we do ?

    I will share with you what I have done to manage this with my family.  While the solution isn't without flawes, it seems to do the trick.  First, you need to have one person who is managing the synching of everyone's devices.  In my family, I have three iphones, about to be four, and five ipads.  We all synch to the same apple ID to allow one another to take seemless advantage of our Itunes, which is on our Imac.  To synch individual music or video interests, we simply select which playlists we want and manually synch that way.  A couple of us use imatch and the cloud to make the entire library accessable as well.  With respect to the imessage, mail, contacts, etc. we each have a gmail account for our individual emails, contacts etc.  So for instance, my forth grade daughter has a gmail account that we choose to synch her contacts, calendar, etc to and then that is also the account where she receives her imessages from on her ipad and itouch. My son, who has an iphone and ipad, does the same thing, but under settings, he goes to imessage and checks his phone number and his email as his preferred way to receive imessages and texts.  My wife and I do the same thing.  To avoid having everyone see one anothers contracts etc, we only synch contacts from our individual email accounts.  Here is the downfall to this:  When you update your phone or add a new device, apple always wants to reset everyone's facetime and imessage settings and then low and behold we are all receiving imessages from one another's friends etc.  To work around this, I simply take each of their devices and go to their imessage settings and only check the email and phone numbers relative to their devices.  I dont' know is this is the best solution, but it seems to work for us. 

  • Can i install windows server 2008 r2 under Windows Small Business Server - Premium

    I have purchased Windows Small Business Server 2008 - Premium and i want to know if i can install Windows Server 2008 R2 and activate the same under the same license.
    Also if there is a link to download the ISO file of the server.

    hello,
    with the SBS 2008 premium Edition you have the Windows Server 2008 Standard but NOT the 2008 R2 Version.
    for installing the second Windows Server 2008 includes on the Premium Edition you do not Need to download a Iso file.
    on this link:
    http://technet.microsoft.com/en-us/library/cc794696(v=ws.10).aspx is mentioned the following:
    To install Windows SBS 2008 Premium, do the following:
    Install Windows SBS 2008 Standard.
    For installation instructions about how to install Windows SBS 2008 Standard, see the
    Windows Small Business Server Installation Guide at http://go.microsoft.com/fwlink/?LinkID=125717.
    Install the second server by using Windows Server 2008, included with Windows SBS 2008 Premium, and then join it to the Windows SBS 2008 domain.
    For second server installation information, see
    Implementing a Second Server on Your Windows Small Business Server 2008 Network at http://go.microsoft.com/fwlink/?LinkId=125734.
    thanks
    diramoh

  • HT1918 how many devices can you register under apple id

    how many devices can you register under apple id

    can you switch apple id's on a device after you have already downloaded apps under 1st id.  In other words I want to buy apps for my daughter under my apple id but I don't want to leave my id open on her device can I associate her apple id and allow her to sync to her itunes account keeping the apps that i purchased under my id

  • Error installing Sun ONE Directory Server 5.2 under Windows 2000 SP3

    Hi,
    When I attempt to install the Sun ONE Directory Server 5.2 under Windows 2000 Server SP3, I get the following errors:
    Installing Sun ONE Server Basic System Libraries
    Installed:C:\WINNT\system32\icudt2.dll
    Installed:C:\WINNT\system32\icuin2.dll
    Installed:C:\WINNT\system32\icuuc2.dll
    Installed:C:\WINNT\system32\libadminutil52.dll
    Installed:C:\WINNT\system32\libadmsslutil52.dll
    Uninstalling C:\WINNT\System32\icudt2.dll
    Uninstalling C:\WINNT\System32\icuin2.dll
    Uninstalling C:\WINNT\System32\icuuc2.dll
    Uninstalling C:\WINNT\System32\libadminutil52.dll
    Uninstalling C:\WINNT\System32\libadmsslutil52.dll
    Uninstalling C:\WINNT\System32\libnspr4.dll
    Uninstalling C:\WINNT\System32\libplc4.dll
    Uninstalling C:\WINNT\System32\libplds4.dll
    Uninstalling C:\WINNT\System32\nsldap32v50.dll
    Uninstalling C:\WINNT\System32\nsldappr32v50.dll
    Uninstalling C:\WINNT\System32\nsldapssl32v50.dll
    Uninstalling C:\WINNT\System32\nss3.dll
    Uninstalling C:\WINNT\System32\sasl32.dll
    Uninstalling C:\WINNT\System32\smime3.dll
    Uninstalling C:\WINNT\System32\ssl3.dll
    Product Install Failed: java.io.FileNotFoundException: C:\WINNT\System32\libnspr4.dll (Access is denied)
    I've checked, and this file does not pre-exist under WINNT\System32.
    Any ideas why I'm getting this error? Is this a bug in the installer?
    Cheers,
    Scott

    IIRC this file, sasl32.dll, should get installed onto %WINDIR%\system32 when you install DS5.2 windows version.
    You may run WinZIP and File/Open "d52diu.zip" (DS5.2 zip image) and look for "nsbasesys.zip", double click to Open it and you should find "sasl32.dll" there.
    Gary

  • Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

    Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

    Hi Ivanlaiwh,
    I have been doing the modification regarding your account.
    You should now be able to proceed to a new purchase.
    Thanks.
    Arnaud.

  • How can i change the name of my iphone on itunes and register under a new name?

    how can i change the name of my iphone on itunes and register under a new name?

    If you want to rename your device in iTunes, follow this article: iTunes: How to rename your device

  • I have an iphone and 2 itouches register under my apple account. I gave the itouches to my kids but when they send messages shows my name in all of them. how can I personalized their itouches so their names will show in IM?

    I have an iphone and 2 itouches register under my apple account. I gave the itouches to my kids but when they send messages shows my name in all of them. how can I personalized their itouches so their names will show in IM?

    Hi Kevin,
    Thanks for taking your time with this. this is messages via app on ipod touch. How can I personalized their itouches? I am new with all this stuff.
    Thanks

  • HT1349 How can I find out my apple care register under my which email account

    How can i find out my apple care register under my which email account?

    settings->itunes & app store the appleID is listed
    same with settings->iCloud

  • Registered my wifes iPhone under my apple account by mistake - how can I register under her account instead?

    I registered my wife's new iPhone under my account and I want to reregister under her Apple account we set up. When I try and register under her account - it comes up as already registerd?

    "Registered" might mean in one of several ways.  But have you un-registered the iPhone from your account first?

  • Deployed web app can't be server default?

    hey folks.
    i've deployed a web app (i can see it in the console under "web
    apps").
    i want to make this web app the default for my server. i went
    to the "target" tab for the web app and made my server the target.
    however, when i go to my server's HTTP page, there's nothing but
    "none" in the "default web application" pulldown.
    anyone have a clue? if you have this working, can you show me
    the xml from config.xml? i will just enter it manually if all
    else fails.
    thanks in advance,
    -bml

    Hi, Gene.
    Check with support. Switching the default webapp by modifying config.xml is
    more compilicated than I descripted in my post. I wish support could address
    this regression ASAP.
    Cheers - Wei
    "Gene Chuang" <[email protected]> wrote in message
    news:[email protected]...
    This seems like a pretty serious regression!
    I created a new war directory (testwar), and tried manually modifyingconfig.xml to switch to a new
    DefaultWebApp, called "testwar". Unfortunately, I get the followingcomplaint of mbean unable to
    find "testwar" component when I restart the server. I looked inconfig.xml and sure enough,
    "testwar" component isn't registered there; seems like the admin serverwas able to detect my
    creation of a new war directory, gives me the message that testwar isdeployed, but did not write
    this info into config.xml!
    This is another reason why manual editting of config.xml is unadvisable,and that this regression
    further exacerbates the problem! Is there a quick patch fix to this???
    Gene
    <Mar 19, 2001 6:52:29 PM PST> <Notice> <Management> <Loading configurationfile
    ./config/mydomain/config.xml ...>
    The WebLogic Server did not start up properly.
    Exception raised:weblogic.management.configuration.ConfigurationException: undefined mbean
    reference: mydomain:Name=testwar,Type=WebAppComponent,Server=myserver
    weblogic.management.configuration.ConfigurationException: undefined mbeanreference:
    mydomain:Name=testwar,Type=WebAppComponent,Server=myserver
    "Wei Guan" <[email protected]> wrote in message
    news:[email protected]...
    It is a bug in SP1. We just create a case. At the same time, you can use
    your editor to open config.xml, search the following section:
    <WebServer
    ClusteringEnabled="true"
    Targets="mycluster"
    />
    Add or modify following line:
    <WebServer
    ClusteringEnabled="true"
    DefaultWebApp="myWebApp"
    Targets="mycluster"
    />
    Cheers - Wei
    "brian long" <[email protected]> wrote in message
    news:[email protected]...
    hey folks.
    i've deployed a web app (i can see it in the console under "web
    apps").
    i want to make this web app the default for my server. i went
    to the "target" tab for the web app and made my server the target.
    however, when i go to my server's HTTP page, there's nothing but
    "none" in the "default web application" pulldown.
    anyone have a clue? if you have this working, can you show me
    the xml from config.xml? i will just enter it manually if all
    else fails.
    thanks in advance,
    -bml

  • When I try to use Safari I get an error message that states it can not find server Xn--%20%20-1ia0eb092a

    When I try to use safari I get a message that states can not find server Xn--%20%20-1ia0eb092a

    It sounds like you've got a messed-up homepage. Click the Safari menu, click Preferences, and under "Home page", re-type the page you'd prefer to load when Safari starts (eg "nytimes.com" or whatever). Close preferences and try again.
    Matt

  • How do I find out which Apple ID my mac is registered under?

    Hi! I have a Macbook Air and would really like to access the free up-dates in the app store. Nearly every time I try to, it asks me for my Apple ID. I think that over the years I ended up with three Apple IDs. Each time I try them, however, it tells me "Your device or computer could not be verified. Contact support for assistance." I can't contact support because I don't live in the US and there is no support calling option for my country and no Apple Stores anywhere near me.
    Can anyone answer:
    1. What does this message mean?
    2. How do I know which Apple ID my computer is registered under? (When I tried to register my computer under one of the three IDs I know of it keeps telling me my serial number is registered under another ID but I have no idea what one! I don't think it is one of the three I know of because each one tells me this message.)
    3. Why do some updates just update when I click them and don't ask for an Apple ID and why does this update that I REALLY need to get work done at my job require an Apple ID? As in, I updated to the new iTunes no problem a little while ago. I'm now trying to get the iWorks update and the OS X Yosemite update and am running across this really annoying Apple ID problem.
    Thanks!

    Lets try the third time -please read
    No One said Ring them up!
    Read what I posted twice
    Contact App Store support for App store assistance - link is on the right of the App store window
    Are you saying that you contacted App store support using the link on the app store window
    Since we only have words to communicate with it really helps if you read the words and do what they say rather than just flail around doing the same incorrect thing over and over
    USE THE LINK on the RIGHT of the App Store Window under Quick Links - DO NOT RING them up! Use the link!
    LN

  • I tried to register my stolen iPhone onto My Profile but it says that it's registered under another apple ID (which is not mine) What does this mean? Does it mean the person who stole my phone is using my phone under another Apple ID?!

    Hi everyone,
    My iphone and Ipad got stollen yesterday...
    I registered my Ipad onto "my profile" but when I tried to register my Iphone 4 onto "My Profile" it says that the product has been registered under ANOTHER apple ID. What does this mean?! Does this mean that the thief is using my phone under a new apple ID?!
    I am getitng  abit paranoid because when I tried to download a new app onto my macbook pro, it says that someone had accessed my account from a new computer. I am so scared.. as I know that if they are able to access my apple ID account they can see my billing/card details. I tried to delete my billing address and card details on my apple ID account to prevent this from occuring but I can't. Please help
    Many thanks,
    Kim

    You should change your AppleID password NOW. And if it says it was registered under another AppleID, the thief has probably done it.

Maybe you are looking for

  • IOS 7 error message 3004

    Downloaded IOS 7 via itunes. Keep receiving error message 3004 when trying to update iphone. Itunes is currently the most recent update and Iphone was at it's most recent update prior to IOS 7. How can I resolve error message.

  • Question about Network In/Out in the Monitor of the Cloud Service

    Hi there My question is that what kind of data is the monitor monitoring? The monitor is in the cloud service. And what are network in/out  in the monitor stand for? The network in/out are in the monitor. The monitor had monitored a huge amount of da

  • AddTextObject - set FormatText = True doesn't work?

    <p class="ssiBODYCOPY">Hi,<br /><br />I am adding a textobject and setting the FormatText parameter to true but the CR(newline) characters that I have included in the string are just being formatted as a space. Is this a bug in Crystal? I am using Cr

  • Illustrator 10 and Window Vista

    Hi! I installed Illustrator 10 on window vista and it does not work. The message that I get is "Illustrator has stopped working". I tried to go to Right-click on the Illustrator.exe file, choose properties, click the compatibility tab, and then selec

  • Over sensitive double clicking (I think!)

    Sorry guys, this isn't exactly AE but I though you might know what's going on. This is a recent thing after we changed the user on the PC that we're running CS5 on. Often when I click on say, a PreComp layer in a Comp it will bring that PreComp's tim