Can a flash drive be backed up?

I've been running Time Machine for a while and I think it's great. What I want to know is if a flash drive can be backed up onto my external drive. I can't remove it from the list of things not to back up so it's not looking good, but I figured I'd ask here just in case there was still a way. Thanks.

When the item is grayed out in the Options to exclude, it means it is NOT backed up; hence, you cannot de-select it for backing up. Hopefully once it is re-formatted HFS+, you will be able to confirm via TM Preferences -> Options that you can include/exclude that drive.

Similar Messages

  • Can I use a flash drive to back up my iTunes?

    Did a search on backing up my iTunes, and only get the option of backing up to a disc (Which is what I've done over the past 3 years. I now have 6 discs accumulated).
    Can I use a flash drive to back up my apps, music, and videos?
    I only have a total of 1.6 GB of apps, music, & video.
    If so, would I then be able to transfer everything from the flash to a new hard drive when I replace the current one?
    Thanks for any advice or help.

    The backup built into iTunes works only with CDs and DVDs, but you can back up onto a flash drive or hard drive manually. Just drag the entire iTunes folder (normally in your user's Music folder) onto the backup device.
    would I then be able to transfer everything from the flash to a new hard drive when I replace the current one?
    Yes. If you back up the entire iTunes folder, you should be able to just copy it back to the new drive in the same location (user -> Music folder).

  • Can same flash drive be used on mac and pc?

    can same flash drive be used on mac and pc?

    ok because i fried a Hp drive yesterday but it never asked me to format

  • USB ports stop recognizin​g external or flash drives during back up, dv7 2185 laptop

    HP Pavilion dv 7 2185 dx, Windows 7 64 bit
    After one of the updates over the last 7 months my computer lost the ability to complete a systems back up.  The back up will  complete about 25 percent  (using external hard drive or flash drive, any of the 3 USB ports)  and then stop.  The My computer page will then not show free space info. for the drives like when it did when they were first plugged in.  It's like the drive became unrecognized during the back up.

    I AM HAVING THE SAME PROBLEM WITH THE SAME MODEL. I GOT THE SERVICE
    MANUAL AND I'M THINKING TO OPEN IT AND SEE IF THERE'S SOME PHYSICAL BAD CONNECTION
    INSIDE. BUT LIKE YOU SAID.  IT'S ONLY THREE MONTHS OLD.!!! I DON'T WANT TO RUIN THE WARRANTEE.
    BUT THIS IS VERY FRUSTATING. I WANDER IF TOSHIBA DOES THIS ON PURPUSE.!!! KEEP IN TOUCH AND
    IF YOU NEED THE SERVICE MANUAL CONTACT ME AT [email protected]
          THANK YOU.!!!!

  • HT2213 Can a flash drive be used instead of a CD?

    I need to restore firmware to my 17" MacBook Pro A1229.  My problem is I have no optical drive.  It completely stopped working and I am waiting to replace it.  Is there any way to restore the firmware using a flash drive instead of a CD?  Thank you

    When I held down the option key the only one that pops up is the Macintosh HD.  I saw no sign of the USB stick.
    I have no idea if this would help or how to go about it... but I have been successful connecting through Firewire Target Disk mode and also at a single level user.  Can I reach and install the firmware from either of those methods???
    I just don't know what else I can do....??  Im not a Apple Tech... anything I know is self taught and right now I don't have a clue....:(  I have repeatedly asked Apple for help and have been refused on all fronts.  I really thought 30+ years of customer loyalty would have counted more to them.  Please forgive my dumping.... it's not directed at you.  You have been the first person to respond to me and I appreciate that more than you know   It might sound crazy but I have never been so utterly let down by a Company in my entire life... They have almost crushed out my spirit and joy that I once found with computers.  (sigh)  
    I will hold on to the sliver of hope that you can tell me something else to try.....   

  • Does Time Machine back up USB Flash Drive?

    I have a 128GB USB Flash Drive. The contents of this flash drive was restored from a previous external SSD (used as storage and has died on me).
    Now I would like my Time Machine to backup both my MacAir and my USB Flash Drive.
    My First Concern is
    So when I plug in my USB Flash Drive, it appears in the Exclude List.
    However, after I remove the USB Flash Drive from the exclude list and click on Save.
    I start to Back Up using Time Machine.
    Does it mean that time machine will back up my USB Flash Drive for this One Time?
    Because when I open up the Time Machine preference, the USB Flash Drive re-appears in the Exclude List again.
    Second Concern
    When I open the HDD I use for Time Machine, I noticed that the latest backup consist of both my MacAir
    and the name of my Previous External SSD (instead of my current USB Flash Drive).
    I am wondering if Time Machine recognise my current USB Flash Drive as my previous external SSD
    since I restored my contents from there.
    So is my USB Flash Drive really backed up (just that Time Machine recognise it as my previous external SSD)?
    Hope someone can share their experience and advice on this.
    (Please do not recommend other app like Carbon Copy Cloner, as I already plan to use the CCC Trial.)
    Thank you to all.

    What is the format of the volume on the flash drive? It's shown in the Finder Info window.

  • Best way to back up computer while temporarily staying at friends?  Flash Drive?

    Hi-  Can a flash drive back up a IMAC Intel 10.5.7 system while I upgrade software to 10.6?  Staying at friends but need to upgrade software now?  Suggestions?

    Make a external drive clone of 10.5, then when you upgrade at your friends house and if later find out it's not working for you, you can option boot off the clone and restore 10.5 like you had before.
    10.6 is a good upgrade, shouldn't be harsh on you and should be a bit more snappier.
    As always check with MacTracker that your machine can handle it, your third party software may require updaing.
    Learn more here to clone etc.
    https://discussions.apple.com/message/16276201#16276201

  • How to reformat usb flash drive after formatting it in mac

    I know this might sound stupid but I used a 16gb kingstonflash drive for a backup for my macbookpro since there are only few to back up and I was thinking I can copy the backup files to an external disk after. With that said, I used the time machine and it said that it would erase everything on the USB. I clicked okand then once the flash drive was "made compatible", it started to backupbut the total file is 34gb so I can't use the flash drive as back up.
    I tried reformatting the flash drive, but the total free space is 198mb and even if I removed the partition or erase ( I see a hitachiand kingstonpartition when I looked at the disk utility) it never goes back to the 16gb. I checked it with windows and the USB space is also 198mb out of 198mb (free space) I don't know where the 15.9gbwent.
    Any help is greatly appreciated.

    Them do it on a Mac with Disk Utility.
    On Windows you might have to first delete all the partitions before you can select Convert to MBR.
    But try it on OS X.
    Open Disk Utility with the drive connected and select the Top name of that drive in the left most area of the window.
    Then in the Partition Layout drop down select 1 Partition. Then the Options... button will become active, select that button.
    Select Master Boot Record and click OK. The format should already be MS-DOS (FAT) but if it isn't select that. You can give it a name or not. Then Click the APPLY button.

  • For John:  my iMac accepted the flash drive when I plugged it in.  However, when I try to save a pages document, there is no reference to saving to that drive.

    Response to John:  am new to using flash drive.  It is the correct version and my computer recognizes it.  However, when I try to save a pages document to that drive, there is no reference to it for saving.  Only my hard drive seems to be available.

    Hi. I suspect your flash drive is formatted with an NTFS file system (this is the default for Windows drives) and as such is read-only on a Mac. Try re-formatting on the either the Windows or Mac computer with a FAT32 file system. Be aware though that you will lose all data on your flash drive so back up first. Also maximum file size is limited to 2GB, is this a problem?

  • Usb flash drive and IPAD 2.

    Can a flash drive be used with the camera accessory?

    "The iPad Camera Connection Kit gives you two ways to import photos and videos from a digital camera: using your camera’s USB cable or directly from an SD card." The CCK does provide a USB port, too.

  • Unreadable USB flash drive

    I use a 32 GB SanDisk Cruzer flash drive for backing up and saving data from my MacBook Pro, and it is now suddenly giving a 'cannot be read on this computer' message on insertion, with the options of initialise, ignore or eject. I do not want to initialise as I will lose my data - is there any way of rescuing / retrieving the data on the flash drive? I would really appreciate some advice and help, as a lot of the saved data is the only copy I have.

    Dear cjvdhx
    I have tried using SanDisk RescuePRO recovery software, but it has not been able to recover my data.
    One of the suggestions i got from SanDisk was to reinstall the USB Mass Storage Driver, which apparently is available at the Apple website, but I cannot find it there.
    Any suggestions?
    Thanks
    Paresh

  • HT1751 I need to uninstall and reinstall iTunes (it won't let me update). So, how do I copy or back up my iTunes library of over 1,500 songs? Can I use a Flash Drive to do so?

    I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool  to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.

    Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to  'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
    The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
    Thanks for the info.

  • How Can I Back Up My iTunes Library To A USB Flash Drive?

    I have around 5GB of files in my iTunes Library and I don't want to have to use multiple blank cds (dvds) to get my files onto my new iMac. On top of that I can't my cd-writer doesn't work. So I bought an 8GB USB Flash Drive and I just want to know how I can get my iTunes Library to back up to my USB Flash Drive.

    Is all your music, as well as your iTunes folder, in My Music? If so, copy your My Music folder to the drive. That will back up all the songs, and the iTunes library files, which happen to be located in iTunes/iTunesMusic.
    In case you are asking how to copy: Close iTunes. Insert the USB drive into the machine and open it like a folder. Then you can use drag and drop to put stuff in it.

  • I have uploaded raw and jpeg files directly from my camera to my iPad (latest version) I have processed them in snapseed and want now to transfer back to my pc for further processing. How can I do this will a flash drive work?

    I have processed my raw and jpeg files on my iPad using Snapseed . What format are they saved in on the iPad and how do I transfer them back to my pc where I use photoshop elements. Can I use just an ordinary flaws drive with the USB adaptor? Thanks any help would be appreciated.
    Lynne

    The camera connection kit can only be used to import photo/video files form a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
     Cheers, Tom

  • My firefox deleted the existing adobe flash player 10.3.183.7 BUT I'm unable to download the new flash drive 10.3.183.10. Can I go back to the old flash player (10.3.183.7)

    I am running Windows XP.
    my firefox deleted the existing adobe flash player 10.3.183.7 BUT I'm unable to download the new flash drive 10.3.183.10. Now I can't play anything. Can I go back to the old flash player (10.3.183.7)?''

    There is something wrong with the download that Adobe is pointing too. You can get the working download here:
    http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_10.exe
    That solved my problem immediately.
    I got this info from this post on the Adobe forum:
    http://forums.adobe.com/message/3947097#3947097
    Flash Download Problems
    WindowsXP SP3
    Mozilla/5.0 (Windows NT 5.1; rv:6.0.2) Gecko/20110902 SeaMonkey/2.3.3
    (Note well: Internally, SeaMonkey 2.3.3 is the same as Firefox 6.0.2. They both use the same Gecko 6.0.2 for rendering Web pages, interfacing with the Internet, downloading, etc.) They differ only in the user interface (menus, buttons, etc).
    I see two problems when trying to download a new version of Flash Player from http://get.adobe.com/flashplayer/. .
    1. Your Web server is sniffing for my browser. I select the "Download now" button, and I get the same page all over again. The navigation is looping. If I spoof Firefox 6.0.2, however, I do get a download. This means you are sniffing for "Firefox" when you should be sniffing for "Gecko".
    2. While spoofing Firefox, the download gives me install_flashplayer10_chrd_aih.exe, which is not the installer for Flash Player 10.3.183.10. Instead, it is some kind of helper. To get the correct installer file, I had to search my archives to find the URI http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win /install_flash_player_10.exe.
    Both of these problems were previously cited in this forum at http://forums.adobe.com/message/3885371. Neither problem has been fixed.

Maybe you are looking for

  • How to creater dynamic form in Acrobat 9

    Can I make a form that will dynamically add pages (with header and footer) when needed in Adobe Acrobat 9 and if so where is the best documentation on how to do this?

  • Why can't I sign into Firefox?

    I've reset my password several times, but FF still doesn't recognize me. I continually get error messages. FF recognized me one time in the last couple of months and then refused to sync. I thought it might have been my old Windows XP, but I now have

  • Swing Panels-not displaying correctly

    I have created a GUI using Panels. Panels are created at runtime and added to the GUI dynamically. But content of these panels are not displayed properly. For beg. some items appear only when I move the mouse over them. When I resize the GUI, content

  • How to set container type in PHP

    Hello, I wanna to set the type of container to be XmlContainer::WholedocContainer. However it did not work, the php warnning "Fatal error: Undefined class constant 'WholedocContainer'". The book named The Definitive Guide to Berkeley DB XML told that

  • OIM and ldap sync

    I am using OIM 11gR2 and OID 11.1.1.6. Users and groups will be in OID, and OIM is required to do the provisioning of users. Plan is to use ldap sync between oid and oim. With ldap sync, all users will be available in OIM. And then in OIM can one do