Can a G5 run the new Max OS X Server v10.5 Leopard?

I have inherited a G5. It needs more ram (it only has 512), but aside from that can it run Max OS X Server v10.5 Leopard with all the calendar server programs? Thank you.

Hi
Absolutely. See:
http://www.apple.com/server/macosx/specs.html
Right hand panel lists the minimum qualifying requirements. In my opinion install as much RAM as the hardware can handle. I don't know which particular G5 you have but as a general rule of thumb the first G5s that came out (1.6Ghz & 1.8Ghz) have a maximum RAM capacity of 4GB. I would also purchase as large an internal drive as the G5 can support. Two of them ideally for redundancy - RAID 1 Mirror. You might also consider a UPS as well as an effective backup strategy.
A useful tool you can use to determine how far you can expand your hardware is Mactracker (if you were not already aware of it):
http://www.mactracker.ca
Hope this helps, Tony

Similar Messages

Why can't I run the new upgrade? All I get is that I am not connected to the internet, even though I am connected???

Why can't I run the new upgrade? All I get is that I am not connected to the internet, even though I am connected???

If you haven't, try updating through iTunes while connected to your syncing PC.

If I download FCP to my old macbook, and then upgrade to a macbook pro, can I transfer it the new machine even if I keep both running?

If I download FCP to my old macbook, and then upgrade to a macbook pro, can I transfer it the new machine even if I keep both running?

Ian Brown, thankyouthankyouthankyou for taking the itme to reply
I am not (indeed) a film studio, so this is EXCELLENT news.

I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes. Can anybody advise?

I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
Any advice would be helpful

Hello Davedamoclese,
Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
http://support.apple.com/kb/HT1923
Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
http://support.apple.com/kb/ht1391
You can download the latest version of iTunes from the below link :
http://www.apple.com/itunes/download/

My computer is a MacBook Pro Intel core duo, and I need to know if I can run the new Lion OS?

My computer is a MacBook Pro Intel core duo, and I need to know if I can run the new Lion OS? The Apple web says must have Intel Core 2 Duo. Please advise. Not knowledgeable enough to know if not having the 2 between Core and Duo is a stopper. Appreciate any guidance.

The difference between a Core Duo and a Core 2 Duo is a show stopper when it comes to running Lion. The Core Duo is still only a 32 bit chip, but the Core 2 Duo is a 64 bit chip. You need the 64 bit chip to run Lion.

I still have ilife '09. How can i update to the new ilife? Do i have to pay for each app seperately in order to update?

I still have ilife '09. How can i update to the new ilife? Do i have to pay for each app seperately in order to update?
I am an Aperture user and I am tired of managing my old iphoto library seperately. In order to use the new combined aperture/iphoto abilities i need a newer version of iphoto. Apple says that the new iphoto is free, however my iphoto (version 8.1.2) did not update. How do i update iphoto so that i can use the library with Aperture?

iPhoto, iMovie and Garageband are free. However, you must be running Mavericks in order to download and use them. Mavericks is free also. Therefore your Mac must be capable of running Mavericks:
The following is from: Apple - Upgrade your Mac to OS X Mavericks.
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
iWork is not as it's an upgrade and not an update. Upgrades for iWork have always had to be purchased. However, the previous iWork apps will work fine with Mavericks.
OT

I have an 2008 model MacBook running OSX 10.6.8 with an iphoto version 7.1.5. The services using this iphoto version are no longer offered. Will my MacBook run the newer iPhoto versions?

I have an 2008 model MacBook running OSX 10.6.8 with an iphoto version 7.1.5. The services using this iphoto version are no longer offered. Will my MacBook run the newer iPhoto versions?

You can run iPhoto 9.2.3 with the system you currently have. It's available thru iLife 11 as Niel has already mentioned.
OT

How to Run the NEW "System Info Command" in Tiger ?????

I am new to Applescript and was wondering if someone could help me on how to run the new "System Info Command"?
Thanks!!!

The "system info" command that red_menace uses above is the new system info command that's mentioned on the web page you referenced. However, red's example only displays the "long user name" and the "AppleScript version" in the dialog.
The entire system info record actually contains all of these items, each of which you can access just like red_menace shows you in his example:
AppleScript version
AppleScript Studio version
system version
short user name
long user name
user ID
user locale
home directory
boot volume
computer name
host name
IPv4 address
primary Ethernet address
CPU type
CPU speed
physical memory
Steve
PS - if you switch Script Editor over so the bottom pane displays the "Event Log" you'll see the entire system info record displayed in the log when you run red_menace's script.

My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Why can't I install the newer version of Flash when I already have the older one?

My virus software is turned off. I have Flash currently on my computer. In the troubleshooting page I can see the clouds in the picture so I know my current flash is working. I went into the internet settings for add-ons and the flash is currently enabled. Why can't I install the newer version of Flash? I tried the run and save option and it still didn't work. I can see the installer in my downloads folder. But, all I get is a black blank box that does nothing. What else can I try to get the installer to actually install the updated version of flash?

Try the offline installer(s)
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X

HT5460 I can not update to the new OS X Mountain Lion. Whenever I do I get a message an error has occurred, timed out 102.W

I can not update to the new OS x Mountain Lion. I get an error that says it has timed out then "102". WHy can't I get it update??
Thanks for your help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Downloading iOS 5 deleted all my photos, contacts, and text messages, i recieved an (-50) error during setup, and i was running the new update of iTunes.

Downloading iOS 5 deleted all my contact, pictures, and texts. I was running the new update of iTunes and i still recieved an error of (-50). Can anyone help with how i can get all my stuff back? Also i just had updated my phone in October and it said the last time i updated 5/18/11 which is not true i am using a PC.

I had the same problem and managed to get all my old contacts back. It was because I synced my contacts toiCloud on the initial setup, but nothing was in there. If you go to settings-iCloud- and turn off contacts, your old contacts should appear!

Safari is closed!!!!!!!! Why can't I install the new version???

Safari is closed!!!!!!!! Why can't I install the new version???

...or download the offline installer (http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg) and reboot. That whay there are no processes other than those launched at startup running.

Can I return my The new Ipad ?

I'm from Australia. Can I return my The new Ipad to apple with reason about not feeling happly of my Ipad is unable to use 4g network?Thanks

If you are within the return policy period of where you bought the
iPad. I believe Apple's policy is 14 days from time of purchase.
If you bought it from other than Apple, you will have to check with
the retailer you purchase from.

The only way I can open a new tab is by right-clicking a bookmarked site and selecting "Open in a New Tab." I can't click on the New Tab + or CTR+T or open via File. WHY?!?

The only way I can open a new tab in Firefox is by right-clicking a bookmarked site and selecting "Open in a New Tab." I can't click on the New Tab + or CTR+T or open via File. WHY don't the other means work?

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Can a G5 run the new Max OS X Server v10.5 Leopard?

Similar Messages

Maybe you are looking for