Can a GSS respond with a different IP if a target server is down?

This is my first GSS and I have read the Cisco Administration guide so please take pity on me.
I don't have any CRA or VIP devices on my network , so is it possible to have the GSS return one IP address if the target device is up and another IP address if the target device is down?
For instance I would like the following scenario to work:
1. The user tries to open 'payroll.mydomain.com' (10.0.0.10) which is located in Houston.
2. payroll.mydomain.com is an alias for a server called 'ora01.mydomain.com'
3. The Houston servers are down due to hurricane.
4. Instead of responding with 10.0.0.10 it returns 10.0.10.10 which is the IP address for 'ora02.mydomain.com'
Can this be accomplished without CRA or SLB?

Hi Brain,
You can achieve this using GSS.
Define Answers - 10.0.0.10 and 10.0.10.10 in different answer group.
In the DNS rule wizard
Define the balance clause 1 to use the 1st answer group server at Houston site (10.0.0.10)
define the second balance clause to use the the second answer group (10.0.0.10).
The GSS will respond with second clause answer group when the 1st clause is not available i.e when the answers(servers) defined in answer group is offline.

Similar Messages

You can't sign in with a different BlackBerry ID on this device

Hello Guys,
I need a little help here. I'm getting following error when try to verify the BlackBerry ID.
"You can't sign in with a different BlackBerry ID on this device. Sign in with orginal BlackBerry the original BlackBerry ID used on this device"
This is how i end up here:
I wanted to change the email address associated with my BlackBerry ID and to do that i deleted the orginal ID using the link from the email "delete this BlackBerry ID" . which i got when creating it for first time.
I also recreated the ID with my orginal email address but even then getting the above error.
Please, let me know how to fix it.
Solved!
Go to Solution.

Hi afzaal
You need to wipe your Q5 first to apply new/different BlackBerry ID. Do not forget to backup your data through BlackBerry Link before you wipe because all of your data will be deleted. You can restore the data after wipe process has completed.
Cheers and good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

Can't sign in with a different Blackberry ID on this device

Hi
Got a Z10 with my blackberry ID on it for a long time with no problems.
My wife bought a Blackberry Bold 9900 and instead of creating a new Blackberry ID, I put mine. She only wanted Facebook on it so I didn't want to create a new ID just for that app.
Now on my Z10, everytime I try to download an app from BB World, got a pop-up with "Verify your Blackberry ID". I try to enter my password, it says:
"You can't sign in with a different Blackberry ID on this device. Sign in with the original Blackberry ID used on this device". But it definitely is the original ID.
I also tried to reset password but the issue persists.
Thanks for any help you can provide,
Martin
Martin
@martingauvreau
Solved!
Go to Solution.

Leslie8120 wrote:
limohabs wrote:
Hi
Got a Z10 with my blackberry ID on it for a long time with no problems.
My wife bought a Blackberry Bold 9900 and instead of creating a new Blackberry ID, I put mine. She only wanted Facebook on it so I didn't want to create a new ID just for that app.
Now on my Z10, everytime I try to download an app from BB World, got a pop-up with "Verify your Blackberry ID". I try to enter my password, it says:
"You can't sign in with a different Blackberry ID on this device. Sign in with the original Blackberry ID used on this device". But it definitely is the original ID.
I also tried to reset password but the issue persists.
Thanks for any help you can provide,
Martin
That`s not going to work.
The reason for that is that your BBID is registered for your Blackberry OS10. The Bold 9900 is a OS7
Therefore the apps avaiable for the OS10 and OS7 are going to be different.
I'm not sure that's true. If you sign in with another device it should switch your info to that device. You can still have multiple devices using one BBID.
Doing a Security wipe on the affected device should allow them to log in using any BBID, even one previously associated with a BB10 phone. It will tell you that your data will be associated with the new phone and, in some cases, email will not go to the old phone. In the case of BB10 as the previous phone, email will still go since it's not associated with BBID on BB10.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help."

Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?

Did you purchase the software in another country than where you live?

Can my iphone operate with two different phone numbers?

can I insert an additional sim card in my iphone so that it operates like a phone with two different selectable lines?
in other words I carry one phone with me but can receive or send phone calls, texts, emails etc from either of two different phone numbers?

No

Deploying a copy of existing database with a different name on the same server

I am a developer(an inexperienced one) trying to understand what is the best way to deploy a brand new database with
the exact same schema as an existing DB on the same server, but with a different name. I want to preserve the data in all reference tables which I can do by having the relevant post-deployment scripts run after the deployment.
What I can't understand is how the project should be set up to deploy database Customer_2 if database Customer_1 exists on
this server - the Visual Studio project contains DB Customer and I need to find a way to be able to deploy Customer_N (but without creating N identical DB's in the project). I checked a ton of articles and blogs, and feel dumb asking this question but haven't
been able to understand it yet. Any help would be appreciated.

Hello,
Maybe the TargetDatabase and the DeployToDatabase properties can help you.
http://www.asp.net/web-forms/tutorials/deployment/web-deployment-in-the-enterprise/deploying-database-projects
You can deploy multiples databases from one project if you want, as explained on the following
post:
http://stackoverflow.com/questions/1544966/gdr-deploying-multiple-database-targets-with-one-project
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How Can I do it with to different ipod on the same computer ?

I have and ipod(1GB) and my daughter has another ipod(4GB), how can we work with the same computer and itune for 2 different ipods ?
iPod(1GB) and a second iPod(4GB) Windows XP 2 different iPods on the same computer

this document might be of some help with that:
How to use multiple iPods with one computer
if you decide on a multiple-user-account strategy, this document might also be useful:
iTunes: How to share music between different accounts on a single computer

How can I format-table with two different variables

I have a script who's purpose is to go through all the mailboxes in exchange and look for any with SG_ or Group listed in the Full Access Permissions. The script works though I'm having trouble formatting the data in a way that I can use it in Excel.
Ultimately I'd like it to report the Name of the mailbox and the name of the entry listed in the Full Access Permissions that has SG_ or Group in the name. Currently the output is the name of the mailbox and then on a separate line the full name of the security
group.
I'm trying to have it so that each part is in it's own column. That will make it easy to review in excel.
$Grabmailbox = Get-Mailbox -Resultsize Unlimited
foreach ($mailbox in $Grabmailbox){
$Getpermission = Get-MailboxPermission $mailbox | where { ($_.User -like "corp\SG_*") -or ($_.User -like "corp\*_group") }
if ($Getpermission -ne $null) {
echo "$mailbox + "$Getpermission | FT User |Out-File c:\Script\VerifiedSG.txt -Append
else{
echo "$mailbox + No SG detected" | Out-File c:\Script\VerifiedSG.txt -Append

Hi Yan,
Thanks for the response but what I am looking for is even simpler than that.
The script goes through every mailbox we have.
It checks the Full Access Permissions for anything with SG_ or group listed in the Full access permissions.
It then should write out to a file the name of the mailbox and the entry in the Full access permissions that contains SG_ or _Group
so something like this:
Mailbox Name <---New ColumN--->Entry
Mailbox1<---New ColumN--->SG_Mailbox1
Ignore the <---New ColumN---> as I simply put that in to emphasize space between the two columns.

Can I upgrade OS with a different machines OS software, Jauar to Panther

I have an 800mhz iMac running Jauguar 10.2.8 and would like to know if I can upgrad with the Panther 10.3.5 software that came with a G5 desktop that I got for my son?
If so, what would the process be to do so?
G4, G5, iMac Mac OS X (10.2.x)

Hi twynsunz!
Here are images of the
Full Retail Version, of the Panther Install CDs,
and the Full Retail Version, of the Tiger DVD.
Good Luck!
ali b

How can I sync iPhone with a different computer

Can I change to different computer to sync my iPhone?

See this article: https://discussions.apple.com/docs/DOC-3141

HT204387 Can my iPhone pair with 2 different bluetooth headphones at once?

I want to know if I can playback music from one phone to two different bluetooth headphones at once so myself and a friend can listen to the same songs.

Don't remember if anyone has reported on this, but just give it a try. Here's an Apple support article on using bluetooth.
http://support.apple.com/kb/ht1664

I have the same apple id on three devices need my daughter to be separate on find my friends, but right now we have to pick which device is found, can I change this with a different id? We share an itunes.

I have my phone, ipad, and touch all on my itunes and same apple id. It is my daughter's touch and I want to have her on my "find my friends" but it is not allowing her device to be separate than mine. Do I get her a separate apple ID, and can that still put her stuff on "our" itunes?

You'll want a separate iCloud account for each user in addition to the main Apple ID used for purchases.
Let's say you have a family of four (husband, wife, and two children). Here is what you will need:
Main Apple ID for shared purchases in Tunes (everybody will be using this)
iCloud (Apple ID) account for husband
iCloud (Apple ID) account for wife
iCloud (Apple ID) account for child 1
iCloud (Apple ID) account for child 2
Yes, you can have both an Apple ID and iCloud account setup on the same device. On each iOS device, setup the main Apple ID account for the following services:
iCloud (Photo Stream and Backup are the only items selected here).
Music Home Sharing
Video Home Sharing
Photo Stream
Additionally, on each iOS device, add a new iCloud account (Under Mail, Contacts, Calendar) that is unique to each user for the following services:
Mail (if using @me.com)
Contacts
Calendars
Reminders
Bookmarks
Notes
Find My iPhone
Messages
Find Friends
FaceTime
On your individual Macs (or Mac accounts), use the main Apple ID in iTunes. Then, use the unique iCloud account in/for iCloud.
Now that everbody is using separate iCloud accounts for your contacts, calendars, and other things, it will be all be kept separate.
The only thing that is now 'shared' would be iTunes content (apps and other purchases), backups via iCloud (if enabled), and Photo Stream (if enabled).

This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help.

I am getting this message about my Adobe ID country not matching the card. Any solutions how to fix this?

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html

I changed my Apple ID email and now I can't sign in with a different id on my phone to update apps

Won't let me sign in wit my new Apple ID email when I try and update apps. How do I change the email on my phone

Apple ID FAQs > http://support.apple.com/kb/HT5622
Apple ID Support > http://www.apple.com/support/appleid/
iCloud FAQs > http://support.apple.com/kb/ht4436

EJB doesnt respond with BPEL running on the same remote server

To all,
I have a BPEL transformation (XSL) calling a remote EJB. It worked with the BPEL process running on the BPEL Designer or in the local host. However if I deploy and run the same BPEL process to the remote server (i.e. the EJB and the BPEL reside in the same server), the EJB doesnt seem to respond. The process runs fine but just does have the values from the EJB. Where should I look and debug this problem?
Here is some more information about the EJB: I have the XSL calls a User Defined Extension component. This component calls a Java utility program in turn calls an EJB client (i.e. Business Delegate). The EJB client calls a Session bean (Session Façade) in turn calls two Entity beans. I packaged the codes in two jars: the EJB and the EJB client in one jar and Java utility programs in another jar.
I deployed the EJB in EAR using the JDeveloper to the remote BPEL server. I FTPed the two JAR files into <ORACLE_HOME>/j2ee/OC4J_BPEL/applib in the remote server. After the deployment, I test the transformation either from BPEL Designer and BPEL local host. They both access the remote EJB successfully. However if I deploy the BPEL process to the remote server and run it from the remote server, the EJB doesnt seem to respond. All the functions worked correctly except there is no value from the EJB. Any advice will be appreciated.

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

Can a GSS respond with a different IP if a target server is down?

Similar Messages

Maybe you are looking for