Can a key command send a program change message to a AU Synth?

I know you can do it to scroll the presets of the logic presets, but can you set up a key command to change the sound on eg Korg Legacy Collection?

I don't think so.
But you may utilize the capslock keyboard.
Just transform in the environment its note on messages into program changes.

Similar Messages

HT4101 Problem sending midi program changes to a Boss Gt100

Hi I am using an app called Set List Maker to send midi program changes to a Korg Triton keyboard successfully but no such luck with a Boss GT100 guitar processor. The message I get is something like cannot use this device.

Hi I am using an app called Set List Maker to send midi program changes to a Korg Triton keyboard successfully but no such luck with a Boss GT100 guitar processor. The message I get is something like cannot use this device.

How do i set program change messages to audio instruments?

it doesnt appear in the info window like it does for midi instruments...
Any ideas? Quite a lot of my reaktor instruments need program change messages, so im a bit stumped how to start working with my ideas.

It can be done in the event editor. Open the event list of the region, select the pencil tool and click to the program change button. A new program change event will appear in the list. All you have to do now is setting the position and the desired program number (maybe you have to subtract one if your soft synth starts with program No.1 because MIDI standard starts with zero).

I bought an unlocked iphone 5 with 32mb especially so I could use any wireless carrier that I wanted to. Why does apple hold me prisoner to use only the carriers that apple wants????? The only thing I can't do is send and receive picture messaging.

I specifically bought and paid for an unlocked iphone 5 from APPLE so that I could use any wireless carrier I wanted to. I have been paying ATT WAYYY too much money the last 20 years. But for some reason APPLE wants to keep me from using any wireless carrier - and I can only use the carriers that APPLE will let me. WHY???? I paid my money!! I expected a lot more than I got. The only thing I can't do is send or received picture messages, but it makes me so Mad that I can';t do that!!!

If you bought an unlocked iPhone then it will work with any carrier but will work only under the restrictions or requirements the carrier sets for its customers. Apple has nothing to do with that. You are describing a problem of restricted access created by the carrer. If you cannot carry out the functions you want, talk to the carrier and see what limits they are placing on you. An unlocked iPhone is fully capable of all functions the carrer allows.

Can Logic 7 filter out select Control Change messages?

I've got a Tascam US-428 that has gone rogue and is sending out random control change messages - a huge number of them. They are all within the range of CC 64-71 and all are on channel 16. Is there some way that I can filter these out so that Logic just ignores them?
Just for fun yesterday I left a blank song up with the US-428 turned on and it ran out of memory in under thirty minutes. That's a lot of useless data that I need to live without.
Any help appreciated!
iMac G5 Mac OS X (10.4.5) 2.5 GB RAM

Never mind. I figured it out. RTFM, although the index wasn't much help.
If anyone has a similar problem with a Tascam US-428 I'd be interested to know whether it's failing or if this is a just a 'design feature.' It seems to be sending way too many messages from the channel faders.

Why can't I call out when I'm in Mongolia? I can receive calls and send and receive text messages.

I'm currently in Mongolia and can not call out from my iPhone 4S using a Mobicom SIM card. I can receive calls and send and receive texts. I use my regular SIM card from Canada and it works fine. It worked fine 6 months ago.

Having incorrect APN settings shouldn't be stopping text message from coming though. But to get the correct APN setting just delete any APN profiles on the device. And the EE ones should just get installed but you can just to make sure use the link that has posted.
You don't need a online account to top-up unless your using the account to top-up through.
CLICK HERE FOR OTHER WAYS TO TOP-UP
with text messages not coming through I have to ask are you getting a signal ?

TS2621 Cannot send emails from my iPad hotmail account. I can receive but not send. I get message"unable to send email"

This just started out of the blue today. I get a message saying email cannot be sent.

I have done everything in the link TechMastr suggested. I can not send a hotmail message from any of my I-devices. I thought it might be just my accounts, but tried my husband's device as well. This includes things not connected to wi-fi and on 3G. Could it be hotmail? It is so frustrating.

Iphone 4s-when wifi is off and I am away from my home connection can I receive and send texts and text messages? I want to keep my wifi off to limit data (email etc) to when I want to check it. Cellular is roaming"voice only" it says.Can I get texts?

When my wifi is off and I'm away from my home connection - it shows wifi off (unless I turn it on to check my email etc.) - and in the settings cellular it shows "voice only". Will I be able to receive and send texts in those settings? Or check voicemail. I had wanted to keep my email from coming in all the time and only want to check it periodically - so I turn ON my wifi when I want to check my email. But when my wifi was off away from home- I hadn't seemed to be getting my texts. So- do I need to keep wifi roaming connected when away from home to receive and send my texts in real time. (which is what I want) or am I still able to send and receive texts with my wifi off when I'm away from home. (When I'm home I am connected to my home data plan automatically through wifi and I get texts when I'm home - but I'm thinking I'm not getting texts in real time - is it because my wifi is off when I'm away from home? My cellular shows voice only when my wifi is off away from home. Am I doing it right to receive and send texts away from home? Or do I need to open up the wifi in order to receive and send text messages. I know that I would need to turn on wifi roaming - which will use data - for email checking or sending - as well as to use browsing apps and now I'm guessing to receive voice messages I may have missed? So do I need wifi on to receive texts too? Thank you - GregorySC

Hello GregorySC,
In order to send and receive SMS or MMS messages, you will need to have an active cellular data or Wi-Fi connection.
You will need these to send and receive iMessages:
An iPhone, iPad, or iPod touch
iOS 5.0 or later
A cellular data connection or a Wi-Fi connection
A phone number or Apple ID registered with iMessage in Settings > Messages
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen

Sending Program Changes to external MIDI device

Just getting started with MainStage, so excuse the basic question . . .
I'd like to use MainStage with two main pieces of hardware – an Elektron Monomachine acting as the master clock and sequencer, and a Machinedrum, which is slaved to the Monomachine. I'm running MainStage to use a soft synth or two sequenced from the Monomachine, and for effects. So far so good.
Patterns on the Machinedrum are selected externally with MIDI Program Changes. Conversely, when you select patterns on the Monomachine, it sends out a Program Change message so that you can lock the two machines together pattern-wise.
In Layout mode, I drop in a rotary knob, hit the Learn button and change patterns three times on the Monomachine; the knob says Program Change and the number of the Program (all correct).
Next, in the Patch editor, I map that screen control to Machinedrum > MIDI Controller > Program Change. If I turn the knob using the mouse, it changes the Program (pattern) on the Machinedrum (all correct).
BUT . . . now (in either Edit or Perform mode) when I change the pattern on the Monomachine (sending a Program Change message), the knob doesn't move. I see the Program Change message being received by MainStage in the MIDI monitor, but it doesn't get routed to the screen control.
What could I be doing wrong? Why does it respond correctly in Learn mode, but then not in Edit or Perform mode?

peterslade wrote:
BUT . . . now (in either Edit or Perform mode) when I change the pattern on the Monomachine (sending a Program Change message), the knob doesn't move. I see the Program Change message being received by MainStage in the MIDI monitor, but it doesn't get routed to the screen control.
What could I be doing wrong? Why does it respond correctly in Learn mode, but then not in Edit or Perform mode?
Hi
Could it be that MS thinks the incoming PC messages are intended to change MS patches?
In Edit mode, select the Concert in the Patch list, and change the Program Change Device/channel etc in the Attributes Inspector to something other than the Mono
HTH
CCT

ESX24 as Multi and possible program change!?

Hi Forum
I allow myself a daft question... Can ESX24 behave as an Multi
say armed with 16 different instruments/Sounds like KONTAKT ?
and/or is it possible to send a program change message to ESX24!?
yours
Bo Lundby-Jaeger
yours
Bo Lundby-Jaeger
yours in advance
Bo Lundby Jaeger
QUAD 4 X 2,5 GHz G5
4.5 GB DDR2 SDram
MacOSX 10.4.10
MOTU 896HD
Samsung ML-1720
Brother DCP-4020c
programs and hardware
Logic pro 7.2.0
Motu 896 HD

No - the EXS24 is monotimbral.
If you want 14 parts, open 14 EXS24's. If you want 34, then... you get the picture. You are not limited by MIDI channels, and each has it's own audio channel object.
The EXS24 does not respond to program changes afaicr - you can use the channel strip performances to do something similar, but generally speaking live program changes in a song is not a good idea, for performance reasons.

Can't make a selection of my pathes even if i have set a program change number for each one.Why is that happening?

Hi everybody!
I send program change messages from my midi controller and the messages are accepted by mainstage 3 as shown in the midi message window,but i can't make a selection of my pathes even if i have set a program change number for each patch.Why is that happening?
I use a novation SL mki or a KORG Triton Le or a m-audio axiom 49 as midi controllers.The program change messages are transmitted by all the devices i mentioned above and shown as received in the midi messages window of mainstage 3.
Has anyone the same experience?

Hi
Have you selected the correct device as the Program Change device and MIDI channel in the Concert Inspector?
CCT

How to send patch level program changes from concert level instruments?

Heya,
Here's the gist of my setup:
I have two concert level external instrument channel strips (Nord Electro 3 and Prophet 8 module). I am attempting to change the bank on the Electro 3 on a per patch basis. It seems as if the concert level nature of the channel strip is overriding my ability to change on a per patch basis. I am sending out a program change on a certain patch, and it is being reflected in all of the other patches across the concert (this is expected behaviour from reading the manual).
I've been looking for a way to manually send the program changes on a per patch basis (for these concert level strips), using some sort variation of the override parent setting, but I've been unsuccessful at finding a method for doing this. Is it even possible?
The behaviour I'm looking to replicate is easily accomplished by manually creating the external instrument channel strip in each of the patches, and then sending out the appropriate program change message. This isn't a problem to do. It is, however, a tad bit cumbersome and sort of defeates the purpose (in my opinion) of having concert level channel strips.
Any wisdom would be appreciated.
Cheers,
Nick

As far as I know the only way to send program changes is to create channel strips in every patch. I don't use concert level channel strips for that reason.
One of the advancements is that you can level your external instrument on patch level.
Tip: create one patch with the channel strips you need and duplicate that one (CMD-D) to create new patches. Works faster for me.

Can software instruments recognize MIDI program changes?

I'm trying to send program changes from my Oxygen 49 (blue). I see them register in the transport window in Logic but the patch doesn't change. For example, trying to scroll through different instruments in the sampler would be much faster than having to use the mouse if I could use the + & - buttons on the Oxygen.
All other control surface functions work fine using M-Audio DirectLink—transport, faders, track selection, etc. But not program changes. Any info would be appreciated. I've contacted M-Audio support but they were not helpful--horrible phone support.

brewbaker wrote:
I'm trying to send program changes from my Oxygen 49 (blue). I see them register in the transport window in Logic but the patch doesn't change. For example, trying to scroll through different instruments in the sampler would be much faster than having to use the mouse if I could use the + & - buttons on the Oxygen.
Most (if not all) of Logic's plugins do NOT receive program changes, the EXS24II can be setup to use two program changes as a toggle for "Next Instrument" and "Previous Instrument". Set Next Instrument to Prg change 1, Set Next Instrument to Prg change 2.
This way you can select Prg change 1 to select the next instrument, then go back to Prg change 00 on the Oxy49, select PG change 1 again to go to the next instrument.
And so on...
Use the EXS "Options" button, then select Preferences to set this up.
pancenter-

Clash of Mac and Logic Key Command Assignments

Greetings to all
I use a Mac Powerbook G4 laptop 15" Model 5,8
In Logic I have keys F9-F12 programmed as the slow and fast rewind forward and back ( ie 4 commands in all)
The Mac factory programmed short cuts, F11 and F12 are usually used for Expose/Mac functions but are reprogrammable, so I went into System Preferences/Keyboard and reprogrammed them as OPTION F11 and F12 for Mac functions.
This then allowed me to use F11 and F12 for the dedicated Logic function.
However, Apple System Preferences for some reason does not 'remember' the reprogrammed keyboard short cut ... which means that each time I boot up Logic, I have to go into System Preferences and reprogramme the short cuts in Apple again.
Can anyone suggest a solution?
Powerbook G4 Mac OS X (10.4.8)

Hi
Sounds like you are still using the (old) Logic 8 (?) key commands. Zoom was changed in the Logic 9 defaults to Control+Option and the arrow keys.
Control Arrow L/R controls Mission Control in Lion (ie 'Spaces').
You could change the defaults in System Preferences:
CCT

Logic + Groovebox - How to attach a program change to a region?

I have hooked up a 16 channel Groovebox with logic 8 to use as a sound module. Is it possible in Logic to "attach" a program change message to a midi region?
e.g. A region playing the groovebox midi channel 1 sends a message to the groovebox telling it to play program/preset 56.
Thanks for the help!

There are several methods to do that...
1/ Select the midi region and double click it to open in Piano Roll. Open Hyper Draw in Piano Roll and choose Program Change from the list. Draw Program changes there.
2/ Place the Playhead to the place you like to input Program Message in Arrange, hit the "Pause" button in the Transport and enable "Record" button. This way Logic is in "Record in place mode". While the region track is selected go to its Inspector and check the "Prg" box after that click and hold your mouse to the right of it and choose program 56 from the list. Logic will make a new small region with the Program message. If you have a setting "Merge the new recorded regions" in the Settings this small region will be automatically merged with the selected midi region in question.
3/ Select the Midi region and open it with Event List editor. Select "Create" button, and click the Program button to create new message.
4/ You can use Hyper Edit window and create "Program Event definition" after that draw program changes etc...

Can a key command send a program change message to a AU Synth?

Similar Messages

Maybe you are looking for