Can a Labview application EXE run on a PC with 128MB RAM

Hi,
What is the minimum requirement of the LabVIEW application exe to run on a PC. Is it necessary to have 256 MB RAM PC.
Regards,
Sowmya

See Release notes. They can be found in the support section of the website or on the install CD/DVD.
Message Edited by andre.buurman@carya on 10-30-2007 10:42 AM
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Similar Messages

Stand alone labview application (.exe file) does not run properly

Hi all,
I am trying to make a stand alone labview application to run on another computer ( I have never done this before).
I went through the tools->build application prompts and was able to build an exe file.
the program is supposed to control a power meter and make power measurements then save them to a text file.
When I run the exe file, on the same computer I compiled the exe file on, the program generates a text file to save data to but it can not communicate with the power meter.
There are some sub-VIs and a dll file that are used to communicate with the power meter. Could it be that I am not telling labview to correctly
include these files when I create an executable?
What are some common problems that occur when generating stand alone applications that could be causing my issues?
And does anyone know of any good tutorials on generating stand alone applications in labview other than the NI help files?
Thanks for your help,
Solved!
Go to Solution.

edCubed wrote:
Hi Bill, thanks for your suggestions.
I haven't tried to run this app on another computer yet. I'm just trying to run it on the computer it was developed on.
The computer I developed it on has all the drivers/resources I need to control the power meter.
Also, I don't know how to include the VISA runtime with my installer. could you explain how this is done?
This is the first time IV tried to turn any labview programs into stand alone exe files so I don't anything about how to do it other than what I've seen in youtube videos and help files.
If you know of any good tutorials that will help me figure this out I would appreciate it.
Thanks,
My fault - I didn't read that this was the same computer. I know the very end of Core 3 studies shows how to build an executable and installer, but even that is very general. I'm not sure if there exists a tutorial on how to do it.
As for including the runtimes, when you build an installer, you have to include the runtimes that your executable will need. It's fairly straightforward.
Since it won't run on the machine that built it, I'll have to think about it a little bit...
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Labview application very runs poorly on better PC hardware

What could cause a Labview application to run extremely poorly when deployed to a new higher performance PC verus the 4 year old one at my desk? I'm using an Intel Core Due 2 on my desktop (2 cores), whereas my application is being deployed to an Intel Xeon (4 cores). I've tried running both the old LV8.6 version of the software and the newer LV2011 version, and both are crawling to the point the application cannot be used. The GUI isn't updating at the 4x per second, the mouse pointer is extremely jumpy when moved around the screen, and tabs/menus take several seconds to a couple minutes to be responded by the application. On my desktop PC, the application runs smooth using the same executable file. Both have the same OS (32-bit XP SP3) and both are running the same anti-virus software.

ExarK,
- Can you supply additional information on what your application is doing?
- Do you have the source code available with the LabVIEW Development Environment? It sounds like LabVIEW is either hogging your resources (insert Wait functions into any loops you are running to periodically free up your processor) or that there is a memory leak (make sure you are closing your references correctly).
- Try building one of our shipping examples to run with your DAQ device (a simple analog input will do). See if this runs slowly on the target PC as well.
Andrew T.
National Instruments

Can a single Application Server run 2 websites?

Hi All,
Can a single Application Server run 2 websites.

Do you mean two sites with different domain names (like www.somesite1.com and www.othersite2.org) ? Then I'm nor sure, all I could think of is to configure them to run on different ports and forward the domain names to the corresponding ports.
Or do you mean two web-applications ? In this case the answer is yes, of course, the URLs would be something like www.yourdomain.net/webapp1 and www.yourdomain.net/webapp2.

How can i stop apps from running in the background with the new ios7 update

How can i stop apps from running in the background with the new ios7 update

Double tap the Home button...slide the last used view of the app(above the icon) up. Tap Home button when finished.

Can an Labview Executable file run automatically upon the boot up of a CPU?

I wanted to use a PC/104 to run a LABView.exe file. So I have two quetions can a Labview .exe program be written so that it dosent need the start buttn pressed to activate it, it just runs upon execution. And the second is that once the PC is booted can it be configured so that the .exe automatically starts?

Hi,
Here is a KnowledgeBase article that I think will be helpful to you as well. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

How to send data to labview code at run time while using with (or executing the sequence)the teststand

Hello
I am new to the Teststand.
I am using labview8.0 with teststand 3.1
I have developed some labview codemodules as vi's without using the teststand utility library pallete
Now i have to run them in teststand.
While executing them(as a sequence) in teststand,i need to enter the data to the labview code at run time.For this labview front panel should appear as GUI or popup (while executing).Is it possible to do this without using teststand pallete.
or i need to change the code with teststand pallete(i think it is difficult now to change the code)
Plz provide a solution to this problem
Also one more,how and where to use the 'pass by reference' option
Thanks and Regards
Mudigondla

Hi,
see your other post http://forums.ni.com/ni/board/message?board.id=330&message.id=13914
Also, you can, specify to display the front panel of your VI when you specify your VI in your sequence file.
There are examples, for dialog panel using LabVIEW, in the examples folder of TestStand and on the NI Web Site.
Regards
Ray Farmer
Regards
Ray Farmer

Running Appserver 9.1 with 256mb ram?

Hi there,
i tried to install the Appserver 9.1 on a machine with only 256mb ram. I think thats the cause why starting the server results in:
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.Is there somewhere an option to set the heapsize down, so that the server can start?
(I know that the minimum requirement is 512mb ram, but performance doesn't matter in this case)
Bye
schuhu
Edited by: schuhu on Nov 4, 2007 8:53 AM

You will need an OS 9.1 or higher full installer CD. You may find them on eBay or at FastMac.com. Be sure to get a full retail installer CD, not an upgrade disc.
You can install OS 9 directly on the hard drive without disturbing your OS X installation. Just be careful to avoid any alerts from the installer asking to format or check the hard drive. If you see such alerts (and you will) during installation simply skip or cancel them.
Now, your hard drive must have been formatted with the Install Mac OS Drivers option checked when you partitioned the drive if you want to boot OS 9 directly. This is not required to use Classic from OS X.

How can i make the .exe run on the computer without Labview?

.exe can't run on computer without Labview. Is there any way? Thank you.

You need to install the LabVIEW Runtime engine for your specific LabvIEW version.
In the project window you can create an installer that includes the Runtime Engine (RTE).
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Photoshop CC can't install ImageReady.exe running

I have tried multiple times to install Photoshop CC. After completing the download, then extracting I get a message:
at 42%
Photoshop CC Install
Please close the following applications to continue:
-ImageReady.exe
Nothing is running. HOW CAN I GET THIS SOFTWARE INSTALLED.
Logged into my administrator account and nothing is running.

Hi visualjmm,
Try to restart the machine or select the option in Task Manager>Processes tab, which says show Processes from all users and then check for this process.
Regards,
Vinay.

How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

EXE runs only on machines with LV installed

I updated a program that made the following changes:
Added a set up panel VI to consolidate data input information,starting quadrant control and added a user input for default file location. This VI opens a new front panel and closes when completed. The EXE version of this works only on machines that has the full LV installed.
The EXE of the old version distributed fine as an EXE with the app builder. Now the new version does not run on the LVRT machines.
I'm sure I'm missing some check box in some set up panel like "re-entrant execution" or something like that. Any clues will be greatly appreciated.
Thanks
DWH
Solved!
Go to Solution.

Hi Dennis,
I'm not sure what is considered calling the VI dynamically. I have it open when the VI is called and it closes when it is completed. The VI does show up in the "dependancies" section when I'm building the app so I left all other items at their default settings. In the source files of the app builder, I'v set the main file as the start up window, then used both the default settings and tried to have the files included as part of the EXE file. I have seen a message box flash on the screen and was able to capture it on a slow running PC. It is eraching for NIAALpro.lvlib and it is found in an instr.lib. What I think I need to do is have the EXE not call any external files. Any hints on how to do that?
Thanks
DWH

Downloaded update 3.6.15.dmg but can't get the downladed attachment to open. My MAC is 900 MHz G3, runs 10.2.8 with 384mb ram

Good Day! Here's my story. Hope y'all can help!
Old MAC iBook, 900MHz G3, 10.2.8, 384mb ram
Download of Firefox update 3.6.15 will not open
Download is visible on desktop but will not initiate
Clicking on download causes it to attempt opening but ceases opening
I had the same issue when I tried to update to 3.5.3 a while back
Currently running Firefox 2.0.0.20 and I get daily warnings and suggestions to update - naturally.
Thanks for your help, in advance!

Firefox 3.6.15 requires at least OS X 10.4, the last version of Firefox that runs on OS X 10.2.8 is Firefox 2.0.0.20

Can I network a MacPro running OS 10.5 with a G3 running OS 8.6?

Hi,
I have a local ethernet network.
At the moment I have a MacPro and a G5 networked successfully. I now want to connect a G3 running OS 8.6. The G3 has built in ethernet but I can't get a connection.
Is it possible? or is the age difference too great?
Greg

I gave up trying.

Has anyone tried running Logic Pro X with a RAM disk?

I Have been reading about the possible benefits of using a Ramdisk (created in terminal, or as a startup AppleScript). Would I see any benefits running LPX straight from RAM? I realize that I would have to save periodically to alternate locations on my SSD or HDR, but would I be flirting with disaster by working this way?..

The Fishman Triple Play is simply the best hardware option to date for triggering external MIDI whether hardware sound modules or software instruments.
Having used many MIDI guitar converters since '89, I can say that the FTP tracking is very accurate and velocity dynamics are reasonably wide from soft to loud.
The Triple Play app works in Stand Alone mode in OSX 10.7.5 but not in 10.8.3.
In 10.8.3, you load the Fishman Triple Play plug-into into the I/O of a software instrument track. Open the app and adjust sensitivity, mono vs poly, transposition down or up an octave, etc. Save your set ups as presets which can be scrolled through with the D-Pad control on the converter.
While the GR-55 is an amazing all-in-one solution in a small, light weight package (in relation to the bulk and weight of several actual guitars, basses, amps, fx, etc), it is a poor choice for triggering external sound sources. Whereas I can play "bass" lines on the open E and A strings with my now obsolete Roland GI-20 and RMC piezo equipped guitar without any sense of latency, the GR-55 latency was simply intolerable. Of course one could revert to the old strategy of playing parts an octave higher on the fret board to increase speed and accuracy of tracking. But what about playing "piano" with fretted triads against the open E or A strings???
Think I'm full of hot air? Skim through this: http://www.joness.com/gr300/MIDI_SPEED.htm
I traded my GR-55 towards a JTV-59.
Once set up, you're gonna love the FTP. As I mostly sequence MIDI in Logic, being wireless is incredibly convenient.
Message was edited by: CC#11

Can a Labview application EXE run on a PC with 128MB RAM

Similar Messages

Maybe you are looking for