Can a learner turn off the visibility of objects?

Hi
I have Captivate on my work computer, but I don't use it yet and it works very slowly! (I'm currently using Storyline.) However, I would like to give some helpful suggestions to a co-worker on one of his Captivate projects.
He has created a project that has on-screen text that repeats what he says as well as on-screen text with what are possibly unnecessary hints. I am wondering if it is possible to set up a button so that the learner can easily turn these text boxes on and off without having to do this for every new screen that he/she enters. Is that possible?
I hope you can help!

Thanks for the quick reply, Rod.
No, he's not using closed captions. He's just putting a lot of text boxes on screen, one after the other. He's not repeating everything he says, but what he thinks is important, I guess.
The closed caption route sounds good, though I guess we'd have to work out where that will be best placed on the screen. Sounds easy to click on and off, and the text will always be in the same place rather than jumping around. A good solution.
Thanks very much!

Similar Messages

After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot
normally.

Kids are using the WiFi all night long and not sleeping... How can I temporarily turn off the WiFi at night using the Airport Extream or Airport Utility? I must keep the guest network up as I have a tenant in an apartment over my garage using that.

My kids are up all night streaming Netflix and using the WiFi on their iPads and Apple TV. The next day they don't want to get up and go to school. Is there a way I can set up a separate access point for just the kids in AirPort Extreme and then turn that one off when i go to bed? Or somehow turn off the main network when I go to bed, without having to reconfigure the entire router the next day, and then simply turn it back on the next morning? I have to keep the Guest Network up as I have a paying tenant living in an apartment over my garage that uses that network.
In the event it's not possible with the AirPort Extreme, any other suggestions would be appreciated.
Thanks in advance.

You can configure the AirPort Extreme for Timed Access using the AirPort Utility. Basically what you are doing is restricting the time of a wireless device by its MAC address has access to the base station's wireless network.
To access this feature: AirPort Utility > Select the Extreme > Edit > Network tab > Enable Access Control: Timed Access Control...

Why can't you turn off the new message indicator on any of the blackberry devices?

i can't believe that i cannot turn off having my blackberry notifiy me when i get an email. at the top of the homescreen i either get a "Message Count" or if I turn this off i get the little red asterik alert folder appearing, plus the mail icon gets a red asterik on it. i don't want to see this and i know that many other users feel the same way.
has anyone figured out a way to turn this off? if not, how can we let blackberry know they need to fix this in future models? there are message boards all over the internet with this same complaint.
a little more background:
- the issue is on a saturday afternoon when i grab my phone to make a call, i don't want to see a little red asterik notifying me that i have a new message. i also don't want to see a running count all the time.
- i tried turning off the data plan part so new messages wouldn't reach me, but the problem with that is when i later turn the data plan back on, the new messages are not then sent. they never each my phone. seems the server tries sending them once and if the data plan is turned off they don't make it, but never make it.
i hope someone at blackberry reads this and they make this simple change in a future model. i'll upgrade to it immediately when they do. i love the device but hate being constantly reminded of new messages.

Hi dplindsey, and welcome to the foams!
It's also time for the 1am Eaddicts meeting to start
Here's the deal, Turn off all the notification, ring tones, led''s for emails.
Go to the main homescreen and hit the menu key twice select make a folder.
Go to your main message queue icon, highlight it and press menu, select MOVE.
Move the Icon in to folder. TA DA! It's GONE
Data plan is good so you can still browse the web. Emails are stil getting delivered so you arent missing any.
What do you think?
If you need more information, please ask
!If not, please resolve the post using the options by the kudos’ star
Just check the post that had your answer!
Thanks
Message Edited by Bifocals on 10-04-2008 02:11 AM
Message Edited by Bifocals on 10-04-2008 02:11 AM
Message Edited by Bifocals on 10-04-2008 02:13 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

New owner of MBP, why can't you turn off the keyboard backlight in Win 7?

I'm a new owner of MBP. I have Windows 7 64bits installed on bootcamp. The keyboard backlight is really bothering me. I thought Boot Camp was out for awhile, and I don't know why can't Apple fix this backlight control thing? I downloaded that power assistant software and I liked it; however, I was turned off that it wasn't a freeware. What can I do to turn this backlight off permanently?

Well... seems like pre-2010 MBPs all had 'non-disablable' keyboard backlights on Windows. Installing BC 3.1 won't help at all. You could temporary minimize backlight level, but not turn it off. And on just any ambient light change it jumps back to maximum. Extremely erratic
A friend of mine got a 2010 MBP and he's able to turn backlight off. I've got mid-2009 model with BC 3.1, and I can't. My another friend has late-2008 model, he can't turn the backlight off, either.
I agree, ideally powerplan7 should have been a freeware. However, although I did spend $10 on a key, I'm oh-so-happy right now. With backlight disabled And since there are no alternatives AT ALL, I'm glad they're not selling this software for, say, $25.

My minor daughter won't give us her icloud password, she is in some real trouble and we need to restore the phone but can't without turning off the find my phone feature and it requires her password

Please someone help. My minor child is 16 years old and has been caught using drugs. we found pictures on her phone that she has been posting in adult apps and chatting with men twice her age. We are trying to restore the phone. She is refusing to give us her password or the answers to the security questions. Please help us. IS THERE ANY WAY TO FIX THIS???

No, to restore, you need to turn off Find My iPhone and to do so you need the Apple ID & password.
It's the Activation Lock that prevents thief wiping the iPhone for reuse.
Take the iPhone from her and if you have the receipt (not from 3rd parties shops), call Apple Care and see if they can help.

Is there any way to turn off the shutter delay?

My phone is my camera and pictures are very important to me. My boyfriend convinced me to try a Blackberry when I switched over to Sprint from Verizon. I love the phone, but this shutter delay kills me. Seriously, I die a little inside every time I try to take a picture. I'm perfectly capable of keeping my hand steady. The option to turn off the shutter delay does not exist in my phone. Is there an app or a download I can find to turn off the delay all together and keep my flash? Or maybe another board or group I should be complaining to? I appreciate any help or comments. Thank you!
I have a BB 9670 if that means anything.

xaviers67 wrote:
Hi,
Not a solution, but ... if you hold the camera button halfway down, it will lock in the auto focus. Then when you want to grab the shot, push the button the rest of the way. Helps in some situations.
hello,
the delay is not due to the shutter. It is due to the autofocus. The tip given by Xaviers67 is to prepare the device, activate the autofocus first, and when you're ready to take the shot, clic as fast as lightning.
I suggest you to simply deactivate the Autofocus feature in the camera options.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I accidently click for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen?

I accidently clicked for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen without access to view options?

Co-el, This wasn't possible as there wasn't a navigation bar available. The F11 did the trick though. Thanks for adding to the discussion.

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

How can i turn off the spam filter?

How can i turn off the spam filter for HP eprintcenter?

zanganah;
I hope you are doing well and sorry to learn that you are having this issue;
Most of the time when you have issues receiving emails is that the email have something like FWD subject line. Eliminate that.
Does the email have a title? Make sure it does.
ePrint emails can only have one email address in the “To:” field. To send an email to your printer and to additional email addresses of friends and family at the same time, put your printer's email address in the “To:” field, and put your friends/family email addresses in the “BCC” (blind carbon copy) field.
Also this are some of the limitations of the service to keep in mind;
The attachment size or number of attachments exceeded the allowed limit.
There is a 5 MB limit to the email and a 5MB limit to each attachment. HP ePrint supports a maximum of 10 attachments to a single email. Emails that exceed these limits will not print.
Is the attached file supported by ePrint? Supported attachments include:
Microsoft Word
Microsoft PowerPoint
Microsoft Excel*
Text files (.txt)
PDF
HTML
Images (bmp, jpg, png, gif, tiff)
* HP strongly recommends that you preview documents in Excel before printing.
Hope this helps:
RobertoR
And Remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

How can I turn off the daily nagging about software updates?

How can I turn off the daily nagging about software updates?
I am _very_ annoyed at having to answer this every day, day after day after day.

Thanks, PJRS.
But if I'm reading that right, the only way to get the nagging to stop is to accept all the download that Software Downloads suggest.
Quite often it pertains only to software I never use. In these cases, I'm not interested in downloading it.
And also -- if I'm understanding that document -- I have to respond every time the nagging drops down (at least once per day).
99% of the time I have no desire to download the suggested software.
In ANY case, it is outrageous that the software resorts to harassing a customer without at least a readily visible means to turning it off
SO -- please let me know what I'm misunderstanding -- thanks..

Can I turn off the TOC ?

I am using RH 8, Windows 7 and generating WebHelp
I have a merged project. I have 4 child rpojects and 1 parent. Can I turn off the TOC on the parent and only see it on the child projects?
I have already unchecked all of the options in all of the windows when I generate and that didn't help.
thanks.
Pat

Hi all
Call me silly here, but why isn't this as simple as creating a single HTML page with links that point to the projects? If you want to use RoboHelp to create the page, go for it. Just turn off the "Show navigation pane link in topics" and generate. Then pluck out the single page and use it. Otherwise, just create a page in Dreamweaver or Notepad or any other editor to link to the projects.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

IOS 8 on the iPad: How can I turn off the night view in the iBook bookshelf?

I've already turned off the automatic switch to white on black in low light while reading my book. But other areas, such as the shelves still switch to night view and I can't find where to turn that off.

Settings, general, passcode lock, enter passcode, turn passcode off.

FAQ: UI - How can I change the color theme, size of the text, or turn off the application frame?

CHANGING THE INTERFACE COLOR SCHEME:
The Photoshop CS6 default interface is dark, but if you prefer the lighter interface you are used to from earlier versions,
you can change it back in the appearance area. There are 4 default color themes.
Mac Photoshop > Preferences > Interface
Windows Edit > Preferences > Interface
CONFIGURING LARGER FONTS:
For those who need larger fonts, you can also change the UI Font Size down in the type area.
Be sure to restart Photoshop to see the changes.
TURNING OFF THE APPLICATION FRAME
CS6 opens now by default in "Application Frame". You can go Window>Application Frame in the main meu and uncheck this

Select the title / text and then click on the "i" (inspector). A colored pin wheel shows up after you click on the square box directly below the font settings inside the inspector window. Then simply drag the dot to the color you want. Like this:
click here
Message was edited by: SDMacuser

I put incorrect passcode to unlock my iphone and it disabled my phone, instructions say to restore but when I try to i get error msg saying to turn off the find my iphone app in order to restore, how can i do that w/o being able to get into my phone ???

after trying to remember my new pass code and failing, my iphone disabled and is now telling me to connect to itunes, ive done that and tried instruction to restore from back up however when i do that i get an error msg saying that i need to turn off the app find my iphone to b able to restore, i cant do that tho because i cant use my phone and i dont see app on my computer on itunes either???what do i do >??

This the Activation Lock. Read here: http://support.apple.com/kb/HT5818
The only way is to login to iCloud with your computer browser and wipe the iPhone.
If you can't then you have a brick, Apple won't help and AL cannot be bypass.
https://www.icloud.com

Can a learner turn off the visibility of objects?

Similar Messages

Maybe you are looking for