Can a Mac with OS X 10.4 remove all traces of prior ownership?

I inadvertently posted this earlier to the OS X 10.5 Leopard board. Got a solution for 10.5, but alas this machine is an oldie and will only handle OS X 10.4. Read on ...
I have a many-years-old 600 MHz PowerPC G3 iMac (Snow White) that I'm planning to sell or donate. Is there documentation anywhere on how to wipe all traces of my ownership? I've done a clean reinstall of Mac OS X v. 10.4.1, upgraded to 10.4.11, so there's no remaining documents or settings, but the install required me to enter registration information, e-mail address, etc.
How can I hand off a fully configured Mac that can be customized by the new owner to his/her specifications and that leaves no personal data behind? i.e. is just as it comes from the factory.
Thanks.

If you have wiped the drive, (zero-overwritten & reformatted) then go and
install a new system, +quit the Installer prior to the personalization+ section;
then there is no need to 'deauthorize this computer' from iTunes store.
In fact, the only reference to the computer would be, as you mentioned,
in the other records to the owned computers listed as 'authorized' in the
iTunes store itself. Of course, you covered that in a way; but the actual
computer without any online records within it, which has been wiped,
would not be able to reconnect to the iTunes store & the former account.
If the computer had been totally restored from a fully erased hard disk
drive with a new installation of the prospective OS X version, and then
the computer minimally personalized to the point where further OS X
updates to the 10.4 system were done, so it has 10.4.11, all Java update,
last QuickTime, last Security Update, recent browser(s), Flash/Shockwave;
and maybe a copy of OnyX by Titanium Software; etc.
Then, there's a way to have the computer re-run the Setup, so the first install-
user account wiped out; and a new first-run on restart Setup will commence
when the new owner gets the computer home and starts it up.
Except, the computer would already have all available updates installed;
yet would be non-personalized and act like a new computer on first start.
This information, using Terminal or other super-user access, has been
noted and detailed elsewhere in the Apple Support Discussions. And this
is what I was referring to in an earlier post; it removes all traces of prior
ownership and does allow the new owner to not have to figure out how
to go through and update the recent the OS X on an old OS. For some
new users of Mac OS X, they are too lost to even get into this process.
Anyway, hopefully you've found satisfactory results in the paths available
to prepare the computer for a second owner, so their experience is as
good as it can be without any uncharacteristic issues for a new owner.
Good luck & happy computing!

Similar Messages

  • Can a Mac be scrubbed to remove all traces of prior ownership?

    I have a many-years-old 600 MHz PowerPC G3 iMac (Snow White) that I'm planning to sell or donate. Is there documentation anywhere on how to wipe all traces of my ownership? I've done a clean reinstall of Mac OS X v. 10.4.1, upgraded to 10.4.11, so there's no remaining documents or configurations, but the install required me to enter registration information, e-mail address, etc. I may upgrade it again to 10.5.8, but my question remains: How do I hand off a fully configured Mac that can be customized by the new owner to his/her specifications and that leaves no personal data behind? Thanks.

    Although you've posted a question which appears based on an OS X 10.4
    Tiger topic in the Leopard 10.5 discussions area, the general means of
    doing the thing you seek should be workable in either of these systems.
    "10.5: Create an updated OS X Install on a to-be-sold Mac" - Mac OS X Hints:
    http://www.macosxhints.com/article.php?story=20090805215651603
    {So long as the license for the OS installed in the computer accompanies it,
    there should be no issue legally with whatever system ends up in the Mac.
    Usually this could be read to mean the physical retail OS X disc should be
    included in the sale of the computer with that OS version installed in it.}
    The shorter method of installing a system, and leaving it non-personalized,
    would be to quit the Installer & turn off the computer using the power button
    just after the installation is complete and before the Setup Assistant runs.
    Then, let the new owner go online and get whatever files he or she can find
    such as they are, Combo update; the Flash, Shockwave, Quicktime, Java,
    the most recent Security Update, current and valid web Browsers, and etc.
    Since all of these can be downloaded as stand-alones (but lack instruction)
    the content of these items could be included on a CD or DVD for the new
    owner to install offline; included along with the retail OS X install disc set itself.
    An upgraded system should include the second full install disc, if that's done.
    There is no need to go into Leopard 10.5 in that old of a computer, as it may
    not be fully supported & there's no need to layer the installations, ie: 10.4 + 10.5.
    Tiger would probably run better than Leopard in that small of a PPC Mac.
    In any event...
    Good luck & happy computing!
    { edited }

  • FaceTime can't be installed on "Macintosh HD" because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion

    FaceTime can’t be installed on “Macintosh HD” because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion.any help with this would be greaty appreciated.

    FaceTime is included in Lion. The App Store version is for 10.6. If you deleted it, restore it from a backup, or reinstall the Mac OS.

  • Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

    Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
    == This happened ==
    Every time Firefox opened
    == I tried to update firefox add-ons ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Try a new profile. See [[Recovering important data from an old profile]]

  • Can't Login to SharePoint as an invited External User / Can't Remove All Traces of External User with Microsoft Account

    Hi TechNet,
    I have an MS SharePoint Online (SharePoint Plan 2) team site, quite simple, one document library etc.
    I have successfully added all users (E3) within the organisation to groups, and permissioned correctly.
    I have added myself (separate organisation, also Office 365 E3) as an External User, and have access to the website without any problems by authenticating with my Organization account e-mail address.
    I have a single user (separate organisation, also Office 365 E3), who's setup is identical to mine (Also Office 365 E3).
    However, when this user is added as an External User, they are unable to login, and get "Sign In is not complete":
    That didn't work
    We're sorry, but [email protected] can't be found in the CLIENT1.sharepoint.com directory. Please try again later, while we try to automatically fix this for you. 
    Correlation ID: dc1f7f9c-092b-20b8-7b35-89348ba22f71
    Date and Time: 3/20/2014 7:06:55 AM
    URL: https://CLIENT1.sharepoint.com/
    User: [email protected]
    Issue Type: Partner User Invalid.    
    I then remove the user using the Site Collection, and using the PRofile Manager, and using Remove-SPOUser, and using Remove-SPOExternalUser. Which is great, he's gone. However when I go to add him back to a group, as soon as I type his e-mail address, it
    'Resolves' into his full name! If I have completely(?) removed him form the site, how is he being resolved? And therefore me trying to remove him to re-add him to try and solve the user/directory/auth issue is not working.
    Furthermore, upon clicking on said client's username inside SharePoint (after I've 'added him back' of course), his ID, in format: i:0#.f|membership|live.com#[email protected] has an entirely different e-mail address, his Microsoft Account! 
    I'm assuming he must have been already signed into his Microsoft Account when he clicked on the External User e-mail invite? If so, I clearly do not want this, how can I remove lal traces of his Microsoft Account, given that I have gone to the lengths as
    detailed above?
    I have already completed these steps: http://community.office365.com/en-us/forums/148/p/228263/709905.aspx
    Some possible further reading regarding Microsoft ID's and Organization ID's:
    http://sergeluca.wordpress.com/2013/09/23/sharepoint-online-and-external-users-this-invitation-has-already-been-accepted-with-another-account-bug-or-feature/
    Please let me know if you need any more information regarding this issue, and thanks in advance to anyone who can shed some light on this situation for me and anyone whom encounters it in the future.
    Regards,
    Evanly.

    Hi Scott,
    Thank you so much for taking the time to read and respond to my issue.
    Certainly, it makes sense that regardless of where the invitation it sent, the user would authenticate with their Microsoft ID.
    In my case, I want the user to authenticate using their Microsoft Organisation ID, that they use for their seperate Office 365 account.
    This is the way I was able to log in, and worked great. With my client, they are unable to access Sharepoint because once they sign in with their Microsoft Organisation / Office 365 ID, they are told they are not in the directory, because their Microsoft
    ID is in the directory and it doesn't match up.
    I am simultaneously trying to 1) Remove all traces of this users Microsoft ID, which so far using the above steps, has been unsuccessful; and 2) Invite the user using his Microsoft Organisation ID, and have him authenticate with that (which is proved to
    work, as my account uses this).
    Looking forward to any more suggestions. Thanks in advance!

  • How can I sync with a new computer without lost all the info?, the old one was stolen.

    How can I sync with a new computer without lost all the info?

    See Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Can't print with adhoc network for HP 7780 all-in-one

    Operating system is Windows Vista 32 bit.
    Downloaded full driver software from HP site and installed it OK with wired connection to printer.  All works fine in this mode.
    Now I want to do wireless printing via an adhoc network called MYNetwork that I generated on my computer with WEP security.  The printer detected the network, I put in the 5-digit password on the printer control panel, and the network was then connected.  It shows connected on my computer also.
    So  now I am connected to the adhoc network, what are the next steps to make the printer show "online" and to actually print wirelessly?  I really feel dumb asking this, as  the answer must be simple.  PLEASE Help!!
    Note that I have completely disconnected the wired connection from the printer to the computer.
    Thanks,
    Garry

    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • 5.0 and 6.0 became entngle, and neithr will start. How can I remove all traces of Firefox and do a "clean" reinstall? Mozilla dosn't appear in Add/Remove Programs, and the uninstaller must've left something behind...

    I tried deleting the Firefox folder as well, but after reinstalling Firefox 6.0, I continue to get a Run error message saying essentially that 5.0 & 6.0 aren't compatible. So, how can I remove all versions from all locations and start fresh?

    I tried deleting the Firefox folder as well, but after reinstalling Firefox 6.0, I continue to get a Run error message saying essentially that 5.0 & 6.0 aren't compatible. So, how can I remove all versions from all locations and start fresh?

  • TS4431 Can't update to IOS8 even when I remove all the APPS I've installed

    I cannot update to IOS 8 on my iPad Air even though I've removed all the APPs I can. I'm afraid to remove my music in case I lose it all forever (I have lots of iCloud storage but don't understand how it works so don't know how to access my music through it.)
    I have 855 MB available and 12.0 GB used. I have Pages and Shazam but even removing them didn't free up enough space.

    Hello estellefromon
    Try updating your iPad using iTunes instead of trying do it through your iPad. If you do that you will not have to worry about making more room. 
    Update your iPhone, iPad, or iPod touch iOS software
    https://support.apple.com/kb/HT4623
    Regards,
    -Norm G. 

  • HT4463 i formated my macbook and i cannot install itunes and all the apps that was on my mac. I purchased my mac from the original owner and removed all that was on my mac. how can i get these programs back on my mac

    Loading...

    Hi sabineolt1,
    Your post indicates you are the operating system on your Mac is 10.5.8
    If that is correct, you will need to update to at least 10.0.6 in order to use the Mac App Store and redownload your purchased apps.
    Cheers,
    Judy

  • How can I remove all traces of Facebook, Yahoo, Google, and Twitter from my computer?

    Hello. I have noticed some very annoying adware/malware/bloatware, whatever it is called. I can not seem to get Google, Yahoo, Twitter, and Facebook off of my computer. When I go to empty my cache and cookies etc from Safari these websites come right back into my top sites. What gives? I don't use these sites. How can I get this garbage off of my computer and keep it from coming back? It's like a virus or something with how annoyingly persistent it is.
    Thanks.

    Andy, thank you.
    Question one:
    I will investigate the .NET Framework Cleanup Tool, which Styxen (to whom I also thank) also pointed me at.
    Question two:
    I’m still confused. 
    I installed my new Windows 7 SP1 system on the 5 November 2013 and Windows Update subsequently offered a number of updates to .NET Framework 3.5.1 which are all successfully installed. 
    KB958488, KB979900, and KB982526 are all old updates now and, with the exception of KB958488, have never been offered by Windows Update and are not installed on my system. 
    As mentioned in my original post, KB958488 is installed on my system but I believe that it was installed without my knowledge by the installation of the Mouse and Keyboard Center or possibly by .NET Framework 4 Client Profile.
    If Windows Update had independently determined that my system needed or could benefit from KB958488, your post appears to suggest that Windows Update would have offered
    KB982526 instead.
    And, of course, I still have no explanation as to why, if KB958488 is an update to .NET Framework 3.5.1, all its files appear to belong to .NET Framework 4 and my update history believes it belongs
    to .NET Framework 4 as well.

  • Since I created an iCloud email account, nothing on my ipad2 syncs with iCloud on my PC and all of my prior information has disappeared from my gmail, notes, calendar, etc. Any ideas?

    Why is it that since I created an iCloud email account (my default email client is gmail), nothing on my iPad2 syncs with iCloud on my PC? Also, all prior content in Notes, Contacts, Mail, Calendar, etc. has disappeared.

    jill257 wrote:
    Okay, I see from the control panel for iCloud in Explorer that now I have to use Outlook as my mail client for Calendar, Mail and Notes. Why? Gmail is my client and everything used to work fine until I had to get that @icloud.com account.
    Also, I see I have to use Explorer as my browser if I want to sync Bookmarks. What's wrong with Firefox?
    Outlook is the only supported Mail/Contacts and Calendars client on a PC.
    And once more, Gmail has no connection with iCloud, you can continu using Gmail on the web or in Mail
    Why not say what you expect to happen and I'll tell you if it will.

  • Can I completely remove all trace of updater?

    Updater built into Reader (8&9), PSE and PRE cannot access the internet from my desktop machine, but can from my laptop. They both have the same installations from the same CD, and the same antivirus (Norton360). The firewall settings on both N360 and the Windows Internet security settings are identical on the two machines. This leads me to think there is something corrupt in my desktop. I have completely uninstalled all Adobe software removed folders (including Programmes/Common/adobe), cleaned the registry and done fresh installs, but still doesn't work. Support have been no use - they simply tell me to reinstall even though I have repeatedly told them I have and it doesn't work.
    Does anyone know if there is a way to identify any other broken files that might be hiding away somewhere in my system. I have Win 7 64bit on both machines.

    Photoshop Elements and Premiere Elements

  • Connecting my Mac with my iPad mini

    I tried to connect my iPad mini with my mac but it does not work. I googled it but I got no satisfactory result. After connecting the devices a message of error appears in the iPad. Can anyone help me with this?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with jpeg only

    I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with lightroom 5 with jpeg only
    Arieh Gertler
    [email protected]

    You can do just about anything with a JPEG image that you can with a raw image. The advantage of working with raw is that it is possible to work with more extremes in exposure. More highlights and shadows can be recovered in a raw image, but there is a lot that can be done with JPEG images as well. All of the library functions and keywording and all the other features of Lightroom can be used on JPEG images just as easily as they can be used on raw images.
    Having said all that, you might be more comfortable using Photoshop Elements. Both programs have trial versions that you can use for 30 days to decide which one or whether both will work for you. It would probably be to your advantage to try them out and decide for yourself.

Maybe you are looking for

  • Authorization to comptuter that don't exist anymore

    Hi to all!  I want to retire all the authorization for synchronization since some computers are not available anymore.  How do I do that? TY

  • Oracle RAC 10g R2 And SUSE SLES10

    Hi there guys I downloaded oracle rac 10 R2 and tried to install it using OpenSuse Linux 10.1 which resulted in an unsoported OS error.. the documentations says about SLES9 which I do not have, my provider has SLES10, I'd like to know is If need SLES

  • Hi I need to loop my video to play in a shop over again?

    Hi I would like to know how to loop my edited video to play over and over in a shop window. Can I do this in iDVD 7.1.2 or anywhere else? Thanks

  • Forecast consumption conceptual question

    Experts, I am trying to understand what advantage does I have by consuming the forecast? lets say last week (w0) I have forecast of 10 pcs, this week (w1) I have a forecast of 10 pcs and next week (w2) i have 10 pc forecast. I have backward consumpti

  • Proper support needed

    ok, so i have a zen touch and zen xtra that are both in need of repair. the problem with the touch is that it has a small crack in the top of the case that prevents the left ear of and headphones or speakers from playing whereas with the xtra the ear