Can a message type bind two process codes?

Hi Experts,
When I maintain the Partner Profile, I add a message type (ZQM1) as Inbound Parameters. Here I bind a message type ( ZQM1 ) with a process code ( ZQE11 ).
But Now I want to bind a another process code ( ZQE51 ) with this message type ( ZQM1 ).
Is this possible? Many thanks.

Kenneth,
  You  Con't
   See logic
1. Process code is being assigned to One Function Module (OR ) Program.
    When you assign process code to particular message type  based on your
    changes in Application this Program will get invoked.If  you assign two
    process codes system will get confused to select the program . 
2. You can Assign one  IDOC TYPE  to 2 message Types.  con't   1message
      type  to 2 IDOC  types.
Pls. reward if useful

Similar Messages

  • Message Type - STTPOD with Process Code as - OPOD

    Dear All,
    I am using Standard Message Type - STTPOD with Process Code as - OPOD and Basic Type as - DELVRY03
    I am creating a New "Z" Segment Copy of "E1EDL20"
    I want to Add in one FIELD
    EKPO - ELIKZ which is Delivery Complete INDICATOR
    How can i fetch data when the IDOC is generated and to take the value from this FIELD.
    Is there any Userexit or BADI
    This we are doing so as we can pass message to SNC for GR Done and Completed
    Regards
    Amey Kulkarni

    Hi Amey,
    As you are using Standard Message Type - STTPOD with Process Code as - OPOD and Basic Type as - DELVRY03
    There is no need create Z-field or any implementation of Userexit or BADI for GR updation in SNC.
    In SNC for updating PO GR status you need to maintain below validation settings:
    TCode:SPRO>Supply Network Collaboration>Basic Settings>Validation>Own Settings-->Maintain Settings in Validation Profiles
    Validation profile=POC1
    Validation check=PO_OPENQUAN_FROM_ASNGRQUAN
    Check status=Inactive
    Validation profile=POC1
    Validation check=PO_OPENQUAN_FROM_ASNQUAN Inactive
    Check status=Inactive
    Validation profile=POC1
    Validation check=PO_OPENQUAN_FROM_POGRQUAN
    Check status=Active
    save the setting.
    Regards,
    Niikhil

  • IDod Type,Message Type,Inbound Function,Process Code Required

    Dear All,
    I require
    1. IDoc Type
    2. Message Type
    3. Inbound Function
    4. Process Code
    for
    a. Vendor Master Creation,Updation,Deletion
    b. Customer Master Creation,Updation,Deletion
    c. Vendor Invoice(TCode-FB60) Creation,Updation,Creation
    d. Vendor Credit Memo(Tcode-FB65) Creation,Updation,Creation
    e. Customer Invoice(TCode-FB70) Creation,Updation,Creation
    f. Customer Credit Memo(TCode-FB75) Creation,Updation,Creation
    i require to insert all the above detail into SAP from another system so please provide me the full detail.if the IDoc type is separate for Creation Updation Deletion then provide likewise.
    Everybody will rewarded.
    Thanks,
    RP

    hi
    use t code wedi and goto EDI administration menu. in that goto development menu. there you can find all items like Idoc type, message type or process code all information is available.  You can also use t code WE30,WE31,WE80,WE81, WE42 - Inbound process code and WE41 Outbound process code.
    Hope this helps.  Assign points if useful.
    Rago

  • Attachment of mesasge type to a process code..

    Hi..
    When I am trying to attach a message type to a process code , for outbound it is allowing me to do so but for inbound it is not allowing me.
    So can anyone please tell me where is the problem?
    Thanks

    Hi Subhash,
    Please ensure you have setup ALE Attributes (BD51) then  message/application object (WE57) prior to setup process code (WE42). Otherwise you may not able to setup/assign your function module.
    Also find below link which will show you step by step on how to configure inbound IDoc processing.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    Hope this will help.
    Regards,
    Ferry Lianto

  • Same message type and two different IDOCS need to be triggered

    Hi,
    I have two idocs with same message type,the partner profile is same.
    Please tell if there is any way to handle this situation without changing the message type.
    Please do the needful.
    Thanks,
    Nivedita

    Hi
    We can have same message type for different idoc types.
    ex:MATMAS.MATMAS01
        MATMAS.MATMAS02
        MATMAS.MATMAS03
    In the above example MATMAS is the same message type for different idoc types.
    Thanks

  • Standard message type limitation on company code

    Hi all,
    currently I'm implementing ale distribution with the standard message type
    FIDCC1, i'm filling idocs in my source code and run function master_idoc_distribute
    now i need to set up a distribution model, but when i do so, the transactions to make
    documents complains that for certain company codes there is no global company code
    although those codes aren't used for the distribution. Is there a way/place where i
    can limit the use to certain company codes, without having to make global cc for
    all the companies in the system?
    or do i need something else then a distribution model to send the idocs?
    grtz,
    Koen

    you will get good answer if you post it in ABAP forum.

  • My sons ipod is frozen. We can't even type in his pass code.

    My sons new ipod is frozen. The screen doesnt respond to touch at all and we've tried resetting it and it still doesnt work. Any one have any suggestions?

    It seems like you will have to restore it. This will sadly erase all content so if you are willing to put back your music/videos etc.. back, then go for it you do this by
    1) Connect the iPod Touch
    2) Press and hold sleep+home until the devicereboots.
    3) Keep holding until that "please connect to iTunes"-screen appears
    4) iTunes says something about having detected atouch in recovery mode. Allow it to do its thing.
    If you get the -18 error, proceed:
    5) Disconnect the iPod Touch
    6) Close iTunes
    7) Reconnect the iPod Touch
    8) iTunes launches and shows message as in step4, but this time, the recovery will work

  • Bind message type and process code

    Hi everyone,
    I want to bind one message type with two procee code,How can I do this?Thanks in advance!
    Best Regars,
    Yu

    Hi ,
          goto to transaction we41 if outbound process code ,go to respective process code or create ur own process code and add message type .
    goto to transaction we42 if inbound process code ,go to respective process code or create ur own process code and add message type .
    But when you add this message type in the partner profile or distribution model then i think it will give an option.
    Please reward if useful.

  • Message type, Idoc type and process code in ALE/Idoc

    Each Idoc version(creams01 or cremas03) will have seperate process codes in Inbound process?
    Whether Message type triggers the process code or the Idoctype/idoc  triggers the process code in Inbound process?
    regards
    Message was edited by: henry

    Hi Henry,
    About your question as how should you assign seperate process code for the same message type ( with different IDoc Type )-
    In We42, the message type can be assigned to the processing code. But here you will find that along with message type there are two more fields - Message Code & Message Function.
    You can use any one these to serve your purpose.
    e.g. you can assign
    -process code P1 to message type M with Message code 1
    -process code P2 to message type M with Message code 2
    Further these process types can be configured to call separate FMs.
    Now depending on IDOC types your external system should populate the message type as well as Message code so that accordingly process code will be determined at the time of inbound processing.
    I hope it's clear & correct
    Thanks,
    Ram

  • Urgent information required regarding message type and process code

    Hi All
    We am working on EDI895 transaction (Delivery/Return acknowledgment) and we are using TXTRAW01 Idoc type for the mapping. Can anyone please let me know what the message type and the process code for the IDoc type is???
    thanks

    Hi,
    Welcome to SDN.
    Please go to transaction WE64 to find out all process codes available for IDoc type TXTRAW01 with message type TXTRAW.
    There are four process codes for message type TXTRAW.
    - ED00
    - ED00_XML
    - ED08
    - TXT1
    Regards,
    Ferry Lianto

  • What is the process code for Message type FUNDMA

    Hi,
    I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
    Thanks
    William

    Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
    Hope this helps.
    ashish

  • EDI/ALE-Output type-Process code relation?

    Hi.
    In EDI preocessing the relation between the Message type and the process code is know.
    But where is the realtion of either of these two to the output type?
    When we hit a F4 in the message control in WE20 for process codes it gives us a list.
    How is this linkages established.
    Output type-process code-message type-output routines?
    Please dont answer in vague terms.

    Dear experts,
    I am a little further now.
    I used output condition WA01 which is already set up in NACE and in MN23 I set up:
    In SP01 I can see the created Spool entries after creating the Good issue with ME2O. So the print out would work. But I need an EDI output....
    I created a new output condition ZWA1 in NACE and set "Processing routines" to EDI.
    I set "Partner functions" to EDI and LS - logical system.
    In MN23 I have:
    I set Event Type to "WA" because when I look at a material document in MB03 it also shows WA:
    In WE20 I have my LS - logicals system and set up the output for MBGMCR03:
    What confuses me is: I have to send the EDI output to a LS - logical system. But in MN23 I can't set the LS - it gives error: "You cannot enter a partner function for output ZWA1"
    No IDoc is created so far - please help. Thank you.
    Best regarsd,
    Peter

  • Idoc Message type and Process Cosde for CJ01 transaction

    Hi,
    What is the Idoc message type and inbound Process code for CJ01 transdaction?
    Is there Any standard procedure to find out Idoc Mesage type and process codes for particular application?
    Thanks.

    Hi,
    All the sending and receiving programs(transaction) start with BD. e.g. if you want to send the material you can use the BD10 transaction and IDOC is available for the same.
    Go to se93 and search for BD* and look for the description.
    Regards,
    Nilesh.

  • Wht is process code in idoc

    plz tell me the meaning and necesity of processcodes(we41 and we42) in idocs.

    hi
    good
    Definition
    Another name for a specific process, for example function module or workflow. IDocs are read or written in this process.
    Use
    In the partner profiles, the processing is never addressed directly but rather always via a process code. You can therefore replace an old process with a new one for any number of partners by assigning the existing process code to the new process.
    Two types of process code are used in conjunction with the partner profiles:
    Outbound Process Code - if you are using outbound processing under Message Control, the IDoc is generated in the IDoc interface. The process code names the relevant function module.
    Inbound Process Code - names the function module or workflow which reads the IDoc data and transfers the data to the application document.
    If you do not know what process code is relevant for your business process, but you know the message type, then you can display the process code defined for this message type: Choose Documentation ® Process codes in the initial node of the IDoc interface or use the F4 Help in the partner profiles after you have entered the message type.
    There are also the process codes for exception handling:
    System Process Code - names the workflow which is triggered in inbound or outbound processing when an exception occurs.
    Status Process Code - names the exception workflow which is triggered when an incorrect status is returned by the external system.
    These two types are configured centrally and not on a partner-specific basis and therefore do not have to be maintained when a new process is defined. They were introduced for the sake of completeness, so that each process in the IDoc interface is addressed via a process code.
    http://help.sap.com/saphelp_46c/helpdata/en/dc/6b804043d711d1893e0000e8323c4f/content.htm
    thanks
    mrutyun^

  • ALE INBOUND Process Code

    Hi,
          In ALE INBOUND Process Code Apart from the Function Module name, what are the important things to be filled up while creating that InBound process code in WE42. What is the importance of those? what is the importance of Object Attributes in that?

    Hi Mahesh check this may be useful to  you
    The inbound function module needs to be linked to the message type and the message type needs to be linked to the appropriate inbound process code at the partner profile level before the scenario is enabled. These steps are described below in detail.
    Link Message Type to Function Module (WE57) Client independent
    u2022 Enter transaction WE57 (ALE -> Extensions -> Inbound -> Allocate function module to logical message)
    Define FM settings (BD51) Client independent
    u2022 Enter transaction BD51 (ALE -> Extensions -> Inbound -> Define settings for input modules)
    u2022 Click on New entries
    u2022 Enter 0 for mass processing in the output column
    u2022
    Maintain process codes (WE42) Client dependent
    A process code needs to be maintained on each client. It then needs to be linked to the message via the partner profiles on each client. This allows the various clients to use a unique function module for the same message type.
    To maintain the process code follow these steps:
    u2022 Log on to the appropriate receiving system client
    u2022 Execute WE42 (ALE -> Extensions -> Inbound -> Maintaining process codes inbound)
    u2022 Choose Inbound with ALE service
    u2022 Choose Processing with function module
    u2022 Click on Processing with function module and choose create icon
    u2022 Click on New Entries
    u2022 Type in process code XXXXXXX and give it a description and save
    u2022 Now you are asked to Please maintain codes added in ALE entry methods, enter and choose XXXXXX and copy it. You should choose a FM similar to your one.
    u2022 Enter your process code XXXX
    u2022 Enter your function module XXXXXX
    NOTE: The next 6 steps are used in workflow error handling.
    u2022 Enter IDPKFIDCMT in object type
    u2022 Enter MASSINPUTFINISHED in End event
    u2022 Enter IDOCINVOIC in IDoc object type
    u2022 Enter INPUTERROROCCURREDFI in IDoc start event
    u2022 Enter INPUTFINISHEDFI in IDoc End event
    u2022 Enter IDOCINVOIC in Application object type
    You will need to determine the task associated with object XXXXXXXX, and then assign the appropriate position to it. This position will then receive the application error messages via workflow.
    To set up the workflow area please consult the Workflow config guide.
    Create inbound partner profile
    For each message type you need to maintain the inbound partner profiles.
    Maintain receiving system partner profile (WE20) Client dependent
    To maintain inbound partner profiles read the document ALE configuration procedure:
    u2022 Add the message type XXXXX with process code XXXX.
    u2022 Enter the output mode (background, immediately) for inbound processing and NO message code.
    Test
    Once the inbound function module has been debugged the scenario should be ready to test in its entirety. If problems occur, read through the relevant areas of this document to check your configuration or code.
    You can find all the inbound and outbound processcodes in we64.
    Regards,
    SMS.

Maybe you are looking for