Can a page only have 1 style for all users?

Portal 3.0.6
I was wondering if there is a way to allow users to apply page styles to their page version of the standard page only. We have a multi-tab page that all users have. I would like the ability for users to select / create new styles for their version of the page without affecting other users. If we grant manage style on the page they can modify the style, but it effects all users which is no good. Also, we are constantly announcing new portlets, so we cannot have the user copy the default page to their own.
So the short question is:
Can a page only have 1 style for all users?
Thanks,
Tom Hillson
null

There is an option on setting a style for a page to use the User's default style. User's can create a style and set it as their default through the Navigator. Any page with the user's default style selected will pick up that style or if the user doesn't have a default, it will fall back on the overall portal default set in global settings.

Similar Messages

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

How can I install and activate extensions for all users

Hi, within the version 7.0.1 I am able to install noscript extension for example for all users.
With version 8.0 the extensions are disabled by default, so I do not install it on company computers.
How can I manage extensions and settings for all users in 9.0?
Best regards
Jens

Hi John,
I appreciate your prompt response.
We have an Australian client here in the Philippines and would want to purchase an adobe software under Creative Cloud Licensing.
Since this type of licensing is not yet available here in the Philippines, they are suggesting that they can purchase it in their country.
My main concern is, will there be any conflict upon installing/activating an adobe software under Creative Cloud which will be purchased from their country?
And what are the steps for installing and activating a software under this type of license.

How can I set the default home page in Firefox 4 for all users that login to a PC on a Win 7 PC?

I work at a community college in upstate NY.
We use Firefox as the default browser at our institution and we have always set the default homepage to be our homepage for all users that login to the PC. We had a procedure to to that that worked with Windows XP and FF 3 or earlier
We would do the following:
1. go to: c:\Documents and Settings\Administrator\Application Data\Mozilla\FireFox\Profiles\<profile_name>\prefs.js
2. Add the line: user_pref (“browser.startup.homepage”,”http://www.genesee.edu”);
3. Copy the Folder
C:\Documents & Settings\Administrator\Application Data\Mozilla
To
C:\Documents & Settings\Default User\Application Data\Mozilla
4. Restart the computer
We're going to Win 7 and Firefox 4 and things seem to be different in terms of files and file structure. Does anyone know how to accomplish this?
Thanks in advance.

Making customisation from the default profile is generally considered poor practice and quite often doesn't work out as planned. (If you're interested in some more information on this, [http://mockbox.net/windows-7/227-customise-windows-7-default-profile.html see here] see here)
This article should help you with developing and deploying your customised Firefox 4 installation (without touching the Windows 7 default user profile):
http://mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently.html

Fast user switching menu - how do I have icons for all users?

I'm setting up a new computer for three users. I have enabled the fast user switching menu. I set the menu to 'Icon'. However, it only shows the icon for myself, the admin. For the other two accounts, when they log in it remains as their (rather long) real names. The same thing happens if I select 'Account Name': it only shows the 'Account Name' for myself. When I switch to the other users, it is still their real name.
How can I have icons (or account names) for ALL users??

See CCK Wizard: https://addons.mozilla.org/firefox/addon/cck/
You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
*http://kb.mozillazine.org/Locking_preferences
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes

How can I create a default dock for all users (Mavericks)?

I would like to modify the dock to display specific installed applications.
I then want this dock to be the default dock for any users that log in.
OS is Mavericks.
All users are AD users.
No server management.
We use Deep Freeze to revert the Mac to the way we set it up.
I can find info for previous versions of OSX; basically just copying the plist, but I can't find anything that works for Mavericks.
Any help would be appreciated!

You could set up a user template for new user accounts, but you can’t stop individual users from modifying their Dock to suit their needs.
I don’t know how to modify the user template, so you’ll have to google for it.

How can I set default toolbar layout for all users in my system?

Hi everybody! I am running a local ubuntu server at my office. I can set some defaults preferences (about:config) for all new users in the system by defining those prefs in the /etc/firefox/syspref.js.
Now, I want to define default toolbar layout in a similar way (maybe not needed but fun), to copy the toolbar layout for my user. Is there a general way to do that?
thank you in advance!

You can try to create a default template folder (defaults/profile) in the Firefox and place the file(s) in that folder for newly created profile.
The only way to customize an existing profile is to copy files directly to it.

How can I create a custom dock for all users?

Hello,
I would like to create a custom dock for everyone that uses a certain Mac. I have found a bunch of stuff, but it is outdated. Most of the tutorials are for 10.4 or 10.5. I am using 10.7.4 and I have found nothing regarding that. Can anyone point me in the right direction?
Thanks in advance

Hello,
I am not sure how I wound-up in the server forum. I am using the desktop version of OS X 10.7.4.
Thanks

Block all websites apart from the homepage for all users. Citrix environment with Server 2003.

Citrix Xenapp 5 and Windows server 2003 environment. We want to force Firefox to kiosk mode with a pre-set homepage for all users. I also want to lock this to only one website. I have managed to set up the kiosk mode with R-Kiosk addon and Mozilla.cfg file. I am trying to use BlockSites to block all internet sites and only allow the one site with the whitelist option. I can get the addon to install for all users, but can’t get the default settings across. I have tried to add this with the Mozilla.cfg file, but it looks like this addon is getting it’s settings from the profile folder. If I set the preferences for the addon in Mozilla,cfg file, it actually picks it up but it doesn’t apply it to the addon for some reason. Does anyone have any other ideas on how I can lock this down to the one site?

I am not entirely sure how to do this, but the enterprise community would be a good place to ask. They have a email group you can ask on this page: [https://www.mozilla.org/en-US/firefox/organizations/faq/]

How to change settings for all users?

Hi All,
In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
Best Regards,
Arti.

Hi Arti,
In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
Try the first one and I hope you will get the solution.
Regards,
Nishit Jani
Award points only if you find the information useful.

Dynamically show/hide pages in a workset for special users at runtime

Hi all,
I want to create a workset that contains pages for different countries. The portal users should only be able to see the countries where they do business. I also would like masterdata from R/3 to drive the display of content on the portal.
- Is there a way how I could dynamically show/hide certain pages of the workset for the specific users?
- Would this showing/hiding of pages affect the workset for all users or only the instance for the specific user?
- Would there be a difference when I want to dynamically show/hide iviews in a page instead of showing/hiding pages in a workset?
Thanks a lot in advance.

Hi Timo,
Check out the article located at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/portal_content/filtering role and workset content.htm
It talks to exactly what you're trying to do. I'd imagine you could extend this simplistic example to have the service pull the users country from his/her master record in R/3 and set their filtering expression accordingly.
Hope this helps,
Marty

ME2N Same variant availble for all users

Hello, its my first post,
Please, somebody knows how can i avail one same variant for all users at Tcode ME2N?
Thanx a lot for your contribute,
Jean Baena

Hello,
Please see information in note 383464
     You can deactivate the 'field-by-field' SPA/GPA attribute by using
     selection variants. Create a new variant for this. When you save this
     variant, you can control the SPA/GPA attribute in the field attributes.
     If a user chooses this variant, then the system also only uses the
     values that are stored in the variant.
     To use a variant already when starting the transaction, create a new
     transaction and start the list display report (for example, RM06EN00)
     using a user-defined variant.
     From Release 4.6B the variant used last is saved as inital variant. If
     you execute the transaction with a selection variant, then the system
     stores this variant for the specific user and for the specific
     transaction. If you execute the respective transaction again, the system
     automatically chooses the selection variant which you used the last time
     again (see Note 326221).
     For the document overview, you have the option to use customer
     enhancement MEQUERY1 to execute own standard variants (see Note 377180).
Regards,

Enable save for all users in rich client document defaultly for all users

Hi,
Is there a option to enable save for all users in a rich client document defaultly for all users across the company. As the users who are creating reports are forgetting to check the box before sending the rich client document to others. Kindly let me know if you have any suggestions on this.
Thanks,
Karthik

I'd suggest that is is where your BO folder structure comes in. You can export from Rich Client to any folder that you have permissions to access - some sort of collaboration folder system would potentially be better and more secure than sending unsecured reports via email. If your IT security team found out that you were removing document security, I doubt they'd be impressed!
You can't do the default save for all users, simple as that (it's bad practice anyway, which is probably why you can't). While it's not the answer that you want to hear, it is the correct one.

How do you set default programs for all users when deploying Windows 8.1?

I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
to be the default for opening pictures, videos, etc. Can that be done?

Great question, this has been bugging me too!
So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
After filtering out the junk, I could see some *interesting* writes to the registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
"Hash"="57y87/ogggU="
"ProgId"="PhotoViewer.FileAssoc.Jpeg"
But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers. This is both good news and bad.
Background:
One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
Solution:
This blog appears to have the answer:
http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
From:
<Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
To:
<Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
perhaps seperate GPO's for Desktops/Laptops vs Tablets?
-k
Keith Garner - keithga.wordpress.com

Task List URL (to FR Report) opens in new window, but not for all users!

Hi all,
I am not sure if this is the correct forum to ask the question (for me it looks like an IE topic), but perhaps anybody can help me anyway...
In one of our Planning apps (9.3.1) we defined several task lists and tasks that link to relevant FR Reports (URL Tasks). If I open the URL task in basic view the relevant FR Report opens in the same IE Window (in the main frame of the planning app). If my colleague opens the same task the FR Reports opens in a new IE Window.
My problem is that I dont have any ideas where I can set the relevant property. Is that a planning property, a workspace property or an IE property setting??? Where can I adjust the settings that for ALL users the URL opens the Report in the same window??????
Thanks in advance!!!!
Kind Regards
André
P.S.: We are on IE8.

Have you both got the same settings in Tools > Internet Options > Tabs Settings
There was also a bug though I can't say if it is related to your issue
9549216 - Instead of a new tab, a new window is displayed after you create a Financial Reporting task in Workspace.
Cheers
John
http://john-goodwin.blogspot.com/

Can a page only have 1 style for all users?

Similar Messages

Maybe you are looking for