Can a period be entered in the Confirmation rather than entering one da

Dear experts
Can we enter the period in Confirmation , rather than entering one day each .
Currently in the sytem if i enter a period ( say 25-05-2009 to 29-05-2009) , system throws error saying it can accept only 24 hours .
This will avoid too many enteries if the Engineer is out for a month at particular location.
Can it be possible thru any configuration , if so pls let me know the nodes.
regards
Rajesh

Hi Shanthala
Thanks for your update. I have checked the same . Here the duration of job comes with the line item , I checked the date profile for the line item category. Can you tell me which is the date rule we suppose to choose to get the duration for more than one day ie 24 hours .
Regards
Rajesh S

Similar Messages

How can I access the window so I can download to adobe and run the file rather than save it

By mistake I put a check mark in the window box to save my downloads to documents. I want to send them directly to adobe so they can be seen. How do I access this window?

hello, you can change that setting in firefox/tools > options > applications - there you can define the default action for the file-type in question (that will probably be '''portable document format (pdf)''' in your case).
[[View PDF files in Firefox without downloading them]]
[[Set how Firefox handles different types of files]]

How can I get synched audio through the computer rather than camera in FCE?

There does not seem to be an easy way to listen to FCE audio through the computer's setup for internal or external speakers. I have for years used Detour to route all of my audio through an M-Audio Firewire 410 interface, and then on to my home stereo system. I then route all systems sounds and sounds in apps like iMail through the internal speaker. This works great. Except with Final Cut Express. For quite a while I could not do anything except play through a firewire connected to an attached Sony PC100 digital video camera, plugging headphones into it's jack.
After many hours and reading many strings on this and other discussion boards, and even reading the product manual, I tried sending FCE through the computer speaker and sure enough it works. By that reasoning, I had Sound Prefs send all audio through the m-Audio setup and that works. Except now I must listen to all of the system sounds that way as well.
OK, I could live with that for my editing sessions, except that now I am experiencing a sound synch delay of around one second. It's all fine when I switch back to the camera as the monitor, but not when routed through, what should be the better sound setup, having the comouter send the soud via the m-audio and stereo.
G5 dual 2Mgz Mac OS X (10.4.5) m-audio firewire 410; 1.5G DDR SRAM;

In final cut, you want the audio to be following the same path as the video - otherwise, as you have experienced, there are processing delays.
If you are sending your video out firewire to an external monitor, the audio should follow. Take the audio off of the A/DV converter and route it to your speakers (or amp & speakers) from there.
good luck.
x

My main library is stored in my G:drive, but can't remember how to open iTunes such that I can reselect/designate that library as the main, rather than my laptop temp library... any advice?

Just sorted.

Unfortunately I don't have first hand experience with the Lacie device but reading your question you said you installed the Seagate media app. I checked the App Store and there is also a LaCie app by Seagate. Check also the link below. I,m going to ask the hosts to move your question to the iPad Forum, hopefully someone has an answer for you.
LaCie Media by Seagate Technology https://appsto.re/us/XWzOZ.i
https://www.lacie.com/us/products/product.htm?id=10618

How can i stop user to get the same screen while entering same T code

hi experts,
how can i stop user to get the same screen while entering same T code (_Means i want user enter same t code but got different different screen how it is possible.)_
i want to know how can we set a authorization is such a manner ...
Through different different login id user got different different screen while entering same T-code.
for example if there is two functional login id mum & noida...
then user login through that and
enter any same functional tcode (for getting purchase order)
but get different different window...so how come it is possible.....
plz explain in brief
thanks in advance...plz do reply as soon as possible

For a custom transaction this is easy, you need to ask your developers to be able to direct users to different screens based on the results of an authorisation check. You could have an auth field e.g. ZSCREEN which is checked in the program & decides what screen the user has access to.
For standard transactions, unless already coded, I would forget it & do what is recommended by Subramaniam and create transaction variants as required. Assign each variant to a custom t-code and users access it that way.
What I am interested is is why do you want to do this?

I can't open personal accounts on the internet. After entering ID and Password then the enter key, it's as if the screen refreshes itself and wants me to start over. Help Please.

I can't open personal accounts on the internet. After entering ID and Password then the enter key, it's as if the screen refreshes itself and wants me to start over. Help Please.

Click here and follow the instructions.
(72059)

Can I stream and sync from the same itunes library to one AppleTV?

Can I stream and sync from the same itunes library to one AppleTV?

From what I can tell this is a bug.
A very Frustrating bug. When the take 2 update launched I was streaming movies via "shared movies" from my synched computer without any issues. However after a couple of recent iTunes updates all the "shared" menus stopped appearing and I can no longer stream anything from my main computer.
When I open up my macbook though everything streams fine, all the "shared" menus immediately appear.
Numerous restarts, factory resets and reinstalling the 2.0 software have done nothing to help this issue.
If anyone has any more light on the subject it'd be great to hear. Also I'm not sure which update broke it because I went about a month not using the apple tv.

Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?

Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?

Doesn't do that for me. Try resetting the phone

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

Wiki file attachments - can the wiki be configured to link to a file already on the server rather than uploading it into the page?

Can the wiki be configured to link to a file already on the server rather than uploading it into the page? This would enable users to open (and edit) the original server hosted document rather than downloading a static copy that can't be edited and synced back into the wiki page.
As a workaround I've tried attaching an alias to a file but it doesn't work - the wiki instead uploads the aliased file.
From what I can work out, the default wiki behaviour is to upload a document to a wiki page, which creates a copy of the uploaded document in the wiki database. This copy has no connection to the original document. It can be downloaded and edited, but the edits are not saved back into the wiki hosted version of the document.
I'd like to be able to upload a link or alias to a document (with preview please!) already on the server. A user could then preview the document or click to open and edit it.
The only way I can do this at the moment is to create a link "afp://123.../doc.rtf" to the original. This is timeconsuming and confusing for non-technical users and doesn't offer the benefits of the attach function (ie document preview).
Is there any way the wiki can be configured to link to documents already on the server using the attach functionality?

An update for anyone in a similar situation.
Patch 3944727 for 9.0.4.1 that solves this issue: "USER LOV IASM11SHIP EDIT USER LOV SHOULD SHOW THE NICKNAME ATTRIBUTE." However, the patch is mutually exclusive with the latest CPU's and there's no plan to merge the pacthes given the dwindling support for 9.0.4.1. So that patch is pretty much worthless.
I've been told that this patch is included in newer portal versions, so the real solution is an upgrade.
Trenton

I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw)

Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting?

TFS Customization - Can we just rename the label of the control rather than renaming fields?

I wanted to reuse some existing fields with different values. I can customize XML to add different values for the existing field since we import the changes to specific project. And I will just rename the Label of the control rather than renaming the field
which will create some potential problems on importing the previous TFS data. I just wanted to ensure that this is the proper way to do it. I did the changes in test server and it works fine. But I need a consultation from experienced guys to know whether
they faced any issues in this thatswhy I am here.

Changing the label is perfectly fine. This will not affect any migration attempts. The form label for a field is separate from the field name and refname.

In popup step how do I get the "text on the button" in the report rather than button index?

(1)
How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
OUT PUT IS 30?" button hit.
(2)
In popup step how do I get the "text on the button" in the report rather than button index?
File attached
Attachments:
test_stand.zip ‏32 KB

The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
The easiest is to use the reporttext.
In a post expression, you can use something like
Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
Just my 2cents
S.
// it takes almost no time to rate an answer
Attachments:
IncludeButtonTextInReport2_0.seq ‏18 KB

Is there a way of displaying the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top?

Is there a way of displaying the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top? I know this can be done when they are displayed as a list, but I want icons!

Hi geezer,
when you open your 'Downloads' folder choose 'View' in the Menu bar and choose:
'as List'
'Show View Options'
In 'View options' window you tick:
'Always open in list view'
'Date Modified', or
'Date created'
Now inside the 'Downloads' folder click on 'Date Created' (or 'Date Modified')
column to get items alined from oldest to newest date (or reverse)…

I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites?

I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites? This is so I can keep my free ones for personal projects but also so they can pay for their own hosting. I am happy to set it all up for them but not sure what to do.

Hi
You can use their BC login details and use them , which on publish the site will be under their account.
Please change the BC login from Edit > Preferences > Publish > Switch Accounts , for Mac it would Adobe Muse > Preferences
Thanks,
Sanjit

Can a period be entered in the Confirmation rather than entering one da

Similar Messages

Maybe you are looking for