Can a personnel area be assigned to more than one company code?

Hi experts,
Can a personnel area be assigned to more than one company code?
Regards,
Anita George

Yes, as Siva said it is not possible.
Between personnel area and company code -
many to one mapping is allowed but one to many is not allowed. That is you can map more than one PA to 1 company code but 1 PA can not be map to more than one company code.

Similar Messages

Can we assign cost center to more than one company code.

Hi All,
Can we use same cost center for more than one company code to post the cost ? Or is it company code dependant?
Thanks,
Kumar

Hi Kumar,
Although the cost center is created under a controlling area, we cannot extend to more than once company code in that controlling area. The Co.code field in Cost Center Master data cannot allow you to feed more than one company code.
But you can post some values from a company code other than the company code to which it is extended. In such case, inter company postings will trigger.
Hope this will clarify your issue.
Best Regards
Surya

Can i assign one vendor to more than one company code how?

can i assign one vendor to more than one company code how?

Hi,
If u create vendor in XK01 then there will be three segments which are general data, company code and purchasing organziation data. General Data will be available at client level so that u can use the vendor across company codes just what u need to do is that u have to give the company code data when ever u r creating for a new company code.
regards
srikanth.

Can i assign one customer to more than one company code how?

can i assign one customer to more than one company code how?

Hi
First Create the Customer Centrally in XD01 and then extend the same Customer in FD01 for the required company codes.
Regards
Venkat

Print out of Purchase Orders from more than one Company codes

Hi MM gurus,
I want to print one Purchase Order copy of more than one Company codes. Is it possible in Standard SAP or i need to develop a program for the same.
Please advice me.
Thanks,
Vasco

Hi,
You can talk with your abaper & maintain entries in the Y Z table & at the time of print you can pop up one screen & put your co code. System will check the cocode with the y z table.
Then you will be able to print in different cocode.
Thanx
Reward if useful.

One Account Statement for customer present in more than one company code.

Hi all,
We have requirement of printing one account statement for customer present in more than one company code.
Program RFKORD10 generates more than one statements for customer present in more than one company code.
Please suggest if any customiztion or program changes need to be done for above issue.
Thanks.

If customer is present in more than one company code then you can config in different co codes.
Now could you brief your requirement, i think you want to print only once and system should print in both company codes at one time. Is it like that?
Regards
Ashu

Assigning ONE PERSONNEL AREA (PA) to more than one Company Code

Can we assign one personnel to more one company code, and if yes, config. step please?
For example:
Can we assign personnel area - AUTO to Company code 1000, 2000 & 3000.

Thanks for your quick answer.
Let me present you a scenario, ok.
We are implementing PA, OM, PY, Recruitment for a company having single client. There are 3 company codes created by FI guys.
Now, we want to go-live with 3 company code at a time. While doing configuration for these sub-modules, we were thinking to have a company configuration that could be used across all company codes.
So we would like to know for example, can we have a common Enterprise, Personnel & org. structures for all the 3 company codes. Can we configure PA and it could be used across 3 company codes, and same things apply to OM, PA & Rec.
Because we want to go-live with company code in 3months?

Assign purchase organization to more than one co codes??

Hey gurus...
Can somebody tell me to how can we assign same purchase organization to more than one company code?
Ganesh.....

You cannot assign one purchase organization to multiple company codes, but you can assign and use one purchase organization to multiple plants belongs to different company codes.
This cross company code purchase organization is useful for better negotiations at corporate level. You can get header level discounts (applicable on total PO Value) across multiple company codes. If you use cross company code purchase organization, you cannot manually enter company code at header level in the PO. The company code is derived from the plant at GR level.

Can I labled the same song to more than one albums? As you know, some songs are repeated in different albums.

Can I labled the same song to more than one albums? As you know, some songs are repeated in different albums.

You can make a copy of an existing song, then change the album, artwork and track number details. You cannot make the same physical file show up in two different albums.
tt2

Can't add a goods-issue with more than one item and one is serial managed.

Hi,
We are trying to issue more than one item to a production order using the DI API. If none of the items is serial managed, they all are accepted and the goods-issue Add is successful. If one the items is batch-managed, the goods-issue Add is also successful. I am able to add the goods-receipt if I it contains only one item and it is serial-number managed. However, if Im issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue. The error message that appears refers to an item that is not among the items being issued. The message is:
-10: (IGE1.WhsCode)(line: 3), Item A00006        with system serial 1 is not in stock.
Again item A00006 is not even in the group of items being issued.
The code I am using for the serial number part is:
With oGoodsIssue.Lines.SerialNumbers
          .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
          .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
          .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
          .SetCurrentLine(n)
          .Add()
          rs.MoveNext()
          n += 1
End With
The rs is a recordset that the code is looping through as the serial numbers are being added.
The error message does not occur during this code. It occurs when it tries to add the full goods-receipt. Does anyone have any idea how I can fix this?
Thanks,
Mike
Edited by: Mike Angelastro on Mar 31, 2008 8:43 AM

Hi Mike,
Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
I guess your n variable start at 1 or 0, so you could put code like this :
With oGoodsIssue.Lines.SerialNumbers
if n = 0 then (or 1, also I don't the correct syntax of your programming language)
.Add()
end if
.SystemSerialNumber = rs.Fields.Item("SysSerial").Value
.ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
.InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
.SetCurrentLine(n)
rs.MoveNext()
n += 1
End With
HTH
Jodérick

How can I use my iPod nano on more than one computer?

How can I use my iPod nano on more than one computer?

Hi, China6450.
Thank you for visiting Apple Support Communities.
I would recommend setting up Manually manage music. This will only allow music to be synced from the computer to the iPod nano. Here are some helpful articles that will walk you through the process.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/HT1202
Cheers,
Jason H.

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

Can I install Adobe Creative Cloud in more than one computer with the individual plan?

I don´t have clear about the diference between individual plan an teams. My questions are:
Can I install Adobe Creative Cloud in more than one computer with the individual plan?
The team plan means that I have to pay for US$70 for each computer that i want to install the creative cloud even if I am the only user?

Hi heymarusia,
Yes, you can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
Regards,

Can I simultaneously configure a device to more than one task?

Can I simultaneously configure a device to more than one task? I am trying to trigger on some of the input data. When I tried to configure the same device to more than one task, I get an error:
Error -10408 occurred at Digital Group Config.
Possible reasons:
NI-DAQ LV: The specified channel is in use.
I have attached a copy of my VI. In the first and second sequences I am using device 1.
Attachments:
Can_I_simultaneously_configure_a_device.doc ‏19 KB

Hello;
The best way to have multiple tasks running on the same DAQ device is by syncronizing those in the hardware level. What I mean by that is, to use the same clock pulse train to clock the different tasks.
For instance, in case you want to do Analog Input and Analo Output at the same time, you can use the AI Start Scan (which is the clock pulse train that will clock the analog input task) to be routed to the AO Update clock (which is the clock that controls the Analog Output tasks of your device). You can extend that idea for counter operations as well.
For digital operations, if you are not using one of the digital boards that support strobed operations, such as the 653x ones, you won't be able to synchronize the digital tasks with the analg tasks, s
ince the digital ports updates through Software calls only.
You are probably getting that error because you are trying to use the Digital Group Config.vi (or some other VI that calls the Digital Config.vi) with a board that doesn't support handshaking operations, such as the MIO ones.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Workflow task Assignment to more than one agent

Hi
Does anyone know about Workflow task Assignment to more than one agent.
This mena at one point there will be more than one approver..
Regards,
Anand

Hi,
Have you checked in OVX6 ? You can assign a given plant to different Sales Org. - Distribution Channel.
Select the Sales Org. - Distbn. Channel, click on Assign & in the pop-up box select the plant.
Regards,
Vivek

Can a personnel area be assigned to more than one company code?

Similar Messages

Maybe you are looking for