Can a power mac G5 ver.10.4.11 upgrade to Leopard 10.5

can a power mac G5 ver.10.4.11 upgrade to Leopard 10.5

Yes, but you will have to find an installation disk some place like Amazon or eBay, Apple no longer stocks it.
Be sure to buy a retail version, black face with large silver X, and not the machine-specific grey face disk.

Similar Messages

Can a Power Mac G5 2.7 dual processor be run as a single processor?

This is in relation to my last question that I may have mis-worded,
Can I run a dual core, dual processor, as a dual core, single processor, and if so, how do I do this?
This is the info on;
About this Mac:
Power Mac           G5
Machine Model     7,3
CPU type             Power Mac G5 - 3.1
Number of CPU's 2
CPU Speed          2.7
Any Help,
Thank you.

Yes. (but yours is a dual processor, single core each processor)
It may be run as a single processor by disabling one processor.
While booted normally, in Utilities, open Terminal and enter the following:
$ sudo nvram boot-args="cpus=1"
To re-enable the 2nd cpu
$ sudo nvram boot-args=""

Can the PCU from a Power Mac G4 w/400 mhz be upgraded to something higher?

Hi Everyone,
I got a few questions that I've been trying to answer since I discovered that the CPU's in the power macs can be upgraded. I got a power mac g4 that I picked up at my local dump for $20. I use to be a standard dell man but once I got my hands on the power mac, I've been hooked. From what I've been reading in the forums, it may be possible to upgrade the cpu on my power mac. I have one slight problem though, I can't tell what model I have. From what I can gather, I may have a sawtooth model (AGP?) but, I'm not too sure. So my questions are as followIs:
1. Is their some type of marker on the Mac that can tell what model it is?
2. Once the model has been confirmed, can it's particular cpu be upgraded and if so, how high?
3. Besides adding more memory (she has 1.5 GB) is their anything else I can do to make her faster?
Well, any help that can be provided would be great!
-Rick
Bronx, NY
P.S. here's the hardware overview:
Machine Model: Power Mac G4
CPU Type: PowerPC G4 (2.9)
Number Of CPUs: 1
CPU Speed: 400 MHz
L2 Cache (per CPU): 1 MB
Memory: 1.5 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XB0470QQJ3B
Sales Order Number: M7891LL/A

Hi-
1. Is their some type of marker on the Mac that can tell what model it is?
Based on the model number, here's your Mac:
http://www.everymac.com/systems/apple/powermacg4/stats/powermac_g4_4002.html
It is a Gigabit Ethernet model.
The linked page lists many of the options that you have.
Further info is here:
http://support.apple.com/kb/HT3082?viewlocale=en_US
2. Once the model has been confirmed, can it's particular cpu be upgraded and if so, how high?
Processor wise, the GE also had a dual 450MHz and a dual 500MHz processor. These would be a plug and play upgrade.
You could also use a processor from a Quicksilver, by adding power to the 4th mount lug of the processor daughtercard.
These processors range from 733MHz to dual 1.0GHz.
More regarding that topic here:
http://discussions.apple.com/thread.jspa?messageID=9354289
Most any aftermarket processor from old makers like Gigadesigns, FastMac, OWC and Powerlogix will work. Current makers of CPU upgrades from Newertech and Sonnet are also available.
Single processors are available up to 2.0GHz and duals up to 1.8GHz.
3. Besides adding more memory (she has 1.5 GB) is their anything else I can do to make her faster?
In OS 9, 1.5GB is the max RAM supported.
In OS X, 2GB is fully supported. 4x 512MB DIMMs are the max RAM supported.
A new hard drive (current ATA/IDE model) is always a great way to boost performance. Old drives are just that, and don't have the cache and other technological benefits that current drives do.
Graphics can also be boosted.
Find a PC version of a Radeon 9800 Pro and flash it to Mac ROM, or, buy a pre-flashed card on eBay in Apple Components.
The 9800 Pro is the top upgrade for 2x AGP graphics machines.
You can also add USB 2.0 support with a PCI card. Get any card that has the NEC chipset, and you are good to go.
Don't forget to get a later model optical drive.
Any Pioneer model will have the best native support in OS X.
In OS X versions lower than 10.4.9, use the appropriate Patchburn utility to get full burn support.
There are other possibilities, but this should get you started.

Can a power mac g5 run on the same ram as a mac pro?

I have a Power Mac G5 and want to buy some new rame and i was wondering if it ran off the same ram from a Mac Pro, Specifically 1 RX8-PC3-8500E-7-10-DO ram type.

OWC is a great source for Mac RAM:
http://eshop.macsales.com/shop/memory/PowerMac-G5-Memory

My Power Mac G5 Wont Install OS X 10.5 Leopard

Hey Guys,
I have a Power Mac G5 that wont install leopard. When I put in the Leopard disk, it boots the install, then says OS X 10.5 can not be installed on this machine.
I tried Leopard assist, but that told me it would not let me use it, becuse Leopard should be able to install on this machine.
Any ideas
Thanks

The retail Leopard install DVD looks like this:
 Cheers, Tom

Power Mac G5: A common dilemma: to upgrade or buy new

I know there are a lot of discussions on this topic going around, but everyone's needs and uses are different, so I'd appreciate any input on my situation.
I own a Dual 1.8 GHz Power Mac G5 with only 1GB RAM and a failing 160GB hard drive.
At this point, I basically only use this machine for web browsing, iTunes, and Garageband, and am running Tiger.
I had been having some major hard drive problems so I wiped my system and re-installed Tiger , importing everything from my iBookG4 (which, I recently dropped and the screen connection has failed and is unusable except for as an external hard drive in target disk mode. it is probably too expensive to fix for what its worth so I will probably try to sell it for scrap).
Anyway, everything was ok for about a week until I opened firefox and noticed all my settings and bookmarks were gone. When I restarted my computer, my music, pictures, documents, and movies folders were all unable to be located (although my applications were fine and my hard drive still showed that the space was the same). I'm not sure if I imported some problem from my iBook or if my hard drive was just messing up again, but I've decided that I either need to upgrade or get a new computer.
Basically, I am thinking about upgrading my memory, getting a new hard drive, and upgrading to leopard (mostly for time machine). Or, possibly getting a new iMac or waiting a bit and then getting a new iMac or even (gasp) a PC (highly unlikely).
I was going to get the memory from ramjet and I was thinking of only adding 1GB to make 2GB but could be persuaded of getting more but 400Mhz DDR memory is a bit more expensive than other types. As for the hard drive, I was thinking about getting a Seagate Barracuda 7200.10 SATA 3.0Gb/s 320-GB Hard Drive with a 16 MB cache. I could pay $15 more for a 500GB with 32 MB cache but i really don't need the space and am unsure whether the cache will really help much. Seagates used to have a pretty good rep I thought, but now they seem to be getting mixed reviews, so I don't know.
Obviously, I am no computer expert, so any help would be great. Would it be worth it to spend between $250 and $325 to get the memory, drive, and leapord when I could maybe sell my G5 and my 23" apple cinema display (the old clear kind) and get an iMac? I could maybe get about $700 - $800 for the G5 and around $300 - $350 for the display. Will an iMac be faster than my G5 with the upgrades? I don't think I need a mac pro for my current uses.
Thanks for your help. Feel free to offer advice on what to do with my iBook too.
-rhineth

Memory: $60 for 2 x 1GB, I'd call that very affordable.
http://eshop.macsales.com/item/Other%20World%20Computing/3200DDR2GBP/
Disk drives: 2 x $69 for pair of WD Caviar 640GB
http://eshop.macsales.com/item/Western%20Digital/WD6400AAKS/
It is not about capacity as much as speed and quiet, cool, and how well it handles OS X. I use half the drive, other half is unformatted free space. I'd skip the Seagates. 7200.11 is current.
I expect new iMacs in '09 as they are overdue.
Hard drives you keep or put in FW case.
Current Leopard is 10.5.4 DVD but would be nice to see another DVD now with 10.5.6, $109 (Amazon, maybe less Newegg?).
iMac vs others:
http://www.macworld.com/article/133467/2008/05/imaccomparison.html
http://www.barefeats.com/harper7.html
http://www.barefeats.com/imp02.html
Sounds like three things you may not be doing or have:
SuperDuper for backups. You don't need Leopard.
Disk Warrior. Everyone, or I should say "HFS+" needs #1 disk repair utility.
Backup drives. Two backup sets you switch between, and a small "emergency" partition on one for running Disk Warrior and such.
I replace or move older drives to backup use and put new boot drive in on a yearly basis. Some new drives and memory should be all you need. A couple people even stress their system with graphics and video, and upgrading to 3 or 4 new drives revived their system so that they could hold on and wait another year.

I've got a 10.5.8 power mac G5 but would like to upgrade to new software, lion and office 2011, but that requires an intel processor. Is this a lost cause? If not any ideas what it might cost me?

Okay looks like I didn't understand the format for these questions. I have used my Mac BookPro almost exclusively for work and my Power Mac for my home recording studio but now want the Power Mac to be a second computer for my work. So I need to upgrade to Lion and install office 2011. So, considering my subject line, any help offered is appreciated.
Thanks.

The max OS for all Macs with a PowerPC processor is Leopard OS 10.5.x.
If you are going to consider getting a newer, but used, Mac, here's the requirements for Lion.
Lion 10.7 System Requirements
    •    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor (most models released since late 2006 - early Intel-based Macs with Core Solo or Core Duo processors aren't compatible)
    •    2GB of memory (recommend at least 4GB -- and ideally even more, as you'll see benefits in many computing tasks)
    •    OS X v10.6.6 or later (v10.6.8 recommended) for Lion download from Apple App Store; or Leopard 10.5.x if using Lion on USB drive
    •    7GB of available space (10GB recommended)
 Cheers, Tom

Power Mac G3 OS 8.6 Clean Upgrade to OS 9.0 - 9.2.2 help needed

Want to clean install OS 9 to replace OS 8.6 to use icloud. The OS 8.6 will connect to Internet but Netscape 4.5 or other browsers are unusable to download anything. Need to know if OS 9.0 or upwards to 9.2.2 are burned on a Windows machine to a DVD would it work or not? Otherwise, is there a source for actual CD or DVD available that is new? Not interested in an eBay purchase of a used or bootlegged copy. Thanks in advance for the assistance.

Hi, no iCloud in OS9!?
Might try Classilla...
http://www.floodgap.com/software/classilla/
Other Browser options...
http://lowendmac.com/thompson/05/1216.html
None will be exceptional fit for today's bloated internet though.
Some PC Apps can burn a Mac readable CD/DVD.
I'm pretty sure nobody is going to find a new OS9 Install Disc.

Where i can download Power mac g4 ppc ... lost operating system

Please help me, i got an incredible collections of mac's but i've lost the install disks for my g4 ppc and is quite impossible to find them in any internet place.
This should be a dead mac ! and i want to use it just for internet.
where i can find the operating system download ???????
Thank's to anybody for help !

What country does eBay not show them?
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4

Can a Power Mac open a Iomega 100MB zip drive?

Would that be the best computer to open this drive? What OS should I use? I am not a Mac user currently. I have a 12 year old book file that was formatted with Quark Express software. I can't get it open and don't want to retype the entire book! (I'm updating it currently) Thanks for any help you can offer!

Here's one for $30 + shipping...
http://www.ebay.com/itm/Apple-Powermac-G4-Tower-450mhz-896mb-80gb-DVD-Zip-Drive- /180709394650#ht_4391wt_1398
But you might find one locally for free!
As mentioned you'll need some kind of old Quark to open it.
Or USB Zip drives for PC or Mac...
http://www.ebay.com/sch/Zip-Drives-/116250/i.html?_nkw=usb+zip+drive
Convert to Indesign...
http://markzware.com/q2id-articles/convert-quarkxpress-indesign-cs5-5-edit-indes ign-text/2011/11/11/
http://www.dynamicgraphics.com/dgm/Article/28868/index.html

Power Mac MDD G4 1.25 Ram Upgrade Question

Since there are 4 slots, do I have in install 4 sticks of 512mb RAM, or can I just do 2 1GB sticks? Or can I do any combination?
(2) 512's and (1) 1gb
Thanks.

Hey t.e.r.,
So first off, is it a pretty fast computer?
Well it's not an dual Quad 3.0 GHz but it's fast enough and it's rock solid. I use it as a work horse and have two internal hard drives and 2 on FireWire with a total of around 10 partitions. I'm often working with 9 or so windows open at one time. It did get slow with around 300 items on the desktop so I jammed that into a folder and it's a lot faster.
And second, does the upgrade of ram beyond 1gb make a significant difference?
Well when I'm doing stuff like making a clone and working with a lot of windows open I need as much RAM as possible.
The only problem with these machines is they sometimes throw a power supply and even now replacements are expensive.
Richard

HT1338 How to update older g4 power mac systems 9.1 to OS X Snow Leopard

Just trying to figure out if I can update my G4 powermac systems 9.1 to Systems 10.6.?

Nope, SnowLeopard (10.6) requires an Intel processor.

How can I uninstall golive CS ver 7.0.2 from snow leopard?

Hello,
I am trying to uninstall GoLive Cs from Mac os 10.6.2 do anyone know what is the best way?
Thanks in advance
Carlos

As for those two pieces of software...the 'net is lousy with compatibility lists.
http://gizmodo.com/5349720/most-complete-snow-leopard-compatibility-list-yet
If something isn't compatible with SL now, look to the app's authors for updates to satisfy it, not Apple.

What can I do to restore good wifi reception after upgrading Snow Leopard

My situation is similar to what is described by others, but different enough that I thought starting a new thread might help. I upgraded from Leopard to Snow Leopard (10.6.3) in January. All was good. As new upgrades came out I conscientiously updated my software. Then about 4-6 weeks ago I noticed that I could not get wireless in some areas of my house, further from my router, where I used to able to get fine reception, and where other computers in the house still worked fine. The other computers are a MacBook Pro (running 10.6.8 but now just updated to Lion) and an iBook G4 (10.4.11). I also noticed that when I streamed video it was choppy, even if I used an ethernet cable.
I decided to reinstall from the CD (10.6.3) and that worked; all internet was back to normal. Then I updated to 10.6.8. Problem came back immediately. Reinstalled 10.6.3 and all was normal. Upgraded to 10.6.4 still normal. Updated to 10.6.5 problem back. Went back to 10.6.3 and back to normal.
I have tried repairing permissions and some of the other suggestions I have found here, but nothing works. The only way to get decent wifi reception throughout my house is to go back to the CD and reinstall. I see lots of people saying that after upgrading to later versions of Snow Leopard they lose wireless, but no one says they just lose wireless at greater distances from the router. I am using a Westell 327W ADSL modem router (802.11g) and I am connecting to the internet on Verizon DSL.
I would like to upgrade to Lion but I heard that this does not help with the Wifi issues others have reported, so would like to get this sorted out before upgrading.
Please help.

The solution given by Tenortim fixed my problem. Thank you Tenortim
https://discussions.apple.com/message/12924009#12924009
It is a little difficult. You have to be able to use Terminal to do step 3. Fortunately, my son was able to explain some of the details. The rest is straightforward.
I wish Apple would not include the new firmware without making sure it worked. I suppose if I upgrade to Lion, which I would like to do, I will have to go through the process again. For now I will stick with 10.6.8 and the Airport driver from 10.6.4, since that is working great.

What is the max os upgrade available for power mac g5 w/powerpc processor

What is the max one can upgrade the os on a powerpc power mac g5

Hi, 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)

Can a power mac G5 ver.10.4.11 upgrade to Leopard 10.5

Similar Messages

Maybe you are looking for