Can a remote window be closed when the subvi is finished executing?

I am dynamically calling subvi's from a main vi with the but when the remote user closes the browser window, it is causing problems with the connection. I would like to be able to programatically close the web window when the called subvi is done running so that i can ensure that the subvi is done when the window closes. Is there a labVIEW command that can be used here? Close FP and setting the FP:state to closed don't close the remote window. Thank you.

Hi Jeff,
It appears that you are dynamically calling the subvi on a remote machine and you want to close the front panel of the subvi after it is done running on the remote machine.
Make sure that in the subvi, under VI properties>>Window appearance>> Customize, Show Front Panel When Called and Close afterwards if originally closed are both checked. This would close the subvi window when it is done running.
Regards,
Ankita A.

Similar Messages

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

Can't install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR.

I can’t install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR, and attempting to format the bootcamp disk does nothing. I have read up on this issue, and the only solution seems to be to make a backup of my computer and reformat all disks via 8.1 setup terminal. I REALLY do not want to do that, is there any way to fix this? I’m on OS X Yosemite, if that pertains to the thread.

Interesting. It wouldn’t install because I had FileVault enabled. Huh. Disabling it saved the day.

How to run a remote windows dll files and the drivers of the system using j

Dear Friends,
I need some valuable info regd how to run a remote windows dll files and the drivers of the system using java
reply regd thanking you

Please don't make duplicate posts like this.

My iTunes Match automatically charged me for a second year when the first year finished. In spite of that, I have lost all of my playlists on my iPhone. How can I get them back?

My iTunes Match automatically charged me for a second year when the first year finished. In spite of that, I have lost all of my playlists on my iPhone. How can I get them back?

Hi,
No need to post three times!
Is iTunes Match still turned on on your iPhone? If not, you need to turn it back on.
If it is still on, go to settings, music app and turn off match- sign out of iTunes Store. Reboot iPhone, sign back into iTunes and turn on match. Poem music app. Does this help?
jim

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

If you uncheck all of the songs, they will only play if explicitly commanded. Command-click in a checkbox and they will all be unchecked. Command-clicking again will check the all again should you want to do that.

Plese Help. Me have FAT32 USB, ISO. Boot camp:Can't install Windows Support Software because the Software Update Server "(null)" can't be found. It asks me to network Diagonostics, but internet ok. Plese Help

Plese Help. Me have FAT 32 USB, ISO, Boot cam say can't install windows support software because the software update server "(null)" can't be found.
I know there are many other threads, but I guess I couldn't find clear answer to this problem. Is that the Apple's server problem or just me?
I'm trying to install Windows7 via Bootcamp, with FAT 32 formated USB with ISO, on Macbook air 2012.
Thanks!

The problem is the encryption and how your notebook handles it rather than a Time Capsule problem. I had similar problems until I updated the WLAN drivers on my IBM T41.
The way I convinced myself it wasn't an Apple problem was to connect my IBM T41, via ethernet, to my AEBSn. I was able to connect to internet so I knew it was a conflict between my wireless card and the AEBSn.
I am now using the WPA2 encryption for the AEBS without issue and connecting many different types of hardware; three iPod Touches, two MSI Wind Netbooks (Win XP SP3), one IBM T41 (Win XP SP2) wirelessly and both my 20" iMac and Dell 8250 Win XP (SP2) by ethernet
The MSI Winds are brand new and they would connect to the AEBSn but couldn't get an IP address from the internet (Limited or No Connectivity error message). The AEBSn was using WEP encryption. After doing a little research I found that WEP was a very common cause of this error message so I switched the AEBSn to WPA2 and everything works fine now.
Don't assume that because you can't connect via OPEN it isn't a encryption issue because my Winds wouldn't connect that way either...it wasn't until I changed to the WPA2 Personal that they connected.
You may also need to change the program that handles the WLAN connection, sometimes Windows handles it better but for the newest addition to our household, the MSI Winds, I am using the Realtek utility that matches the WLAN card and everything is hunky dory...
Finally sometimes firewalls will prevent getting the IP address...doesn't happen often but it has happened to me so I would double-check that by turning off the Windows Firewall and just verify that it isn't the firewall (that's never been a problem with my Apple AEBSn but it was a problem with an older Dlink g model).

Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

http://www.apple.com/support/bootcamp/

How can I turn off "reply" button when the messages come? I prefer the "open" button.

How can I turn off "reply" button when the messages come? I prefer the "open" button. Because my friends usually send lots of messages at the same time so I cannot read all of them when I press "reply", then I have to go to Messages -> my friends' messages, and it's really complicated.

Sorry for not quite understanding. I guess you are referring to a notice in an alert. I do not have that alert active on my device, so I cannot say. I use the banner alert, so I just get a notice of a message and can swipe to open that particular message. If I ignore it, it will eventually go away.

Whenever I open a post on Facebook I can't close it without closing also the site. How can I change that ?, Whenever I open a post on Facebook I can't close it without closing also the site. How can I change that ?

Since I got OS X Mavericks whenever I open a post on Facebook I can't close it without having to close the whole site also. How can I change that ?, Whenever I open a post on Facebook I can't close it without closing also the site. How can I change that ? Thanks.

What does FaceBook have to say about that?
Repeating yourself four times was such a great help, not.

HT1349 Itunes closed when the two movies I purchased were being downloaded. When I reopened Itunes, my money remained the same after I purchased them, but the movies were gone. How do I get them back?

Itunes closed when the two movies I purchased were being downloaded. When I reopened Itunes, my money remained the same after I purchased them, but the movies were gone. How do I get them back without having to rebuy them?

If they did not download, then clikc Store>Check for Available Downloads

How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

All apps (and other content from the store) are tied to the account that downloaded them, whether or not they are free. To do in-app purchases in that app you will either need to log in with the account that downloaded it, or delete it (which will delete its content) and download it with your currently logged in account if you want to do IAPs on that account.

How can i uninstall Windows 7 and remove the partition?

how can i uninstall Windows 7 and remove the partition? white unibody late 2009. i cannot seem to find bootcamp either :/

Open the Boot Camp Assistant in the /Applications/Utilities/ folder and use it to restore the drive to a single partition setup. If it's not there, use Pacifist to extract it from your install DVD and run the combo updater for your OS version.
(79308)

JDeveloper 11g,when the release version finish

Hi JDev Team
I read in many threads the JDev 11g have many features and resolver some problems for users like Templates and others.
when the release version finish?
and why oracle not publish the plan for JDev and ADF Faces and ADF BC and SOA
Thanks oracle.

We don't commit to dates because of Sarbanes-Oxley Act - http://en.wikipedia.org/wiki/Sarbanes-Oxley_Act.
If all goes as planned you'll get your first taste of what's coming up in release 11 in a couple of weeks.
For the production version release dates I can only say that it is going to be in the next Financial Year.

Approval Preview when the workflow is finished

Hello,
We have implemented the BADI to get multiple level approvals in Shopping Carts. When we display the approvers via Approval Preview the system works fine if the workflow is in process, but when the workflow is finished we donu2019t display anything.
We have SRM 4.00 and the support package SAPKIBKS13 for SRM_SERVER 500
Thanks in advance, Juan Manuel

Hi,
Please check for following excrepts from SAP help sites:
1. OSS Note 1093840, content here may help to debug.
2. You are using ad hoc agent objects to determine your agents, do not use rules directly as this limits the functionality
    available especially during approval preview and can have knock on effects in the display
3. Mark any steps you have added that are not approval steps as "step not     in workflow log" - the applet display is based on
   the graphical workflow log and unexpected steps can cause unexpected effects in the applet display
4. Make sure you follow the same pattern based approach if you are adding extra approval steps, e.g. make sure the approval
    step itself has the same group name as the other approval steps
Also additionaly check for workflow log(SWi6) . If WF is working fine.
Thanks

Can a remote window be closed when the subvi is finished executing?

Similar Messages

Maybe you are looking for