Can a screen fade in and out???

Hi,
I am putting together a slide show using the Screens option
in Flash CS3. It is a series of photographs, and I want each one to
fade in, then fade out as the next shot is loaded. The transitions
seem to offer only an in OR an out fade - can't I do both??
Hope someone can clear this up.
Hugh

I'm sure there is probably some actionscript that can do
this, however I am unaware of it.
What you can do is:
1. Make sure each slide is converted to a movie clip
2. Create two keyframes for each slide
3. Create a motion tween between the two keyframes
4. Change the alpha on the second keyframe to 0% (this
creates your fade out)
To fade in, just change the alpha to 0% on the first keyframe
instead. Then you can move the tweens on the timeline to either
crossfade, or fade in fade out. Hope this helps.
GAMBRKER

Similar Messages

  • Can slide transitions fade in and out?

    I have a slide show set with fade in transitions, and I want
    the slides to fade out when the next slide fades in. Can someone
    please tell me how to do this??
    Thanks.

    I'm sure there is probably some actionscript that can do
    this, however I am unaware of it.
    What you can do is:
    1. Make sure each slide is converted to a movie clip
    2. Create two keyframes for each slide
    3. Create a motion tween between the two keyframes
    4. Change the alpha on the second keyframe to 0% (this
    creates your fade out)
    To fade in, just change the alpha to 0% on the first keyframe
    instead. Then you can move the tweens on the timeline to either
    crossfade, or fade in fade out. Hope this helps.
    GAMBRKER

  • How do I adjust my titles so they don't fade in and out? I have hundreds of photos/videos on screen for a second or so each, for a year-long birthday video, and I need the dates in my titles to be steady rather than fading in and out spastically.

    I have been working on a project since December of 2012 for my son's first birthday. Basically, it's a photo or quick video each day of his life so far. I used the "upper" title and made the titles not fade in and out, because that could give someone a seizure. The idea is a seamless title that ticks away each day. But in the new iMovie, it changed my settings, and I can't for the life of me find how to change them back.
    Now, each date flashes in and out, in and out, in and out. Fractions of seconds go by. It's really distracting and annoying.
    How do I get the titles to remain on screen and not fade in and out? I had it just how I wanted it, but now we're rapidly approaching my son's birthday, and the video is suddenly a mess.
    How do I fix this?

    I am working with the very same concept for my project and the auto fade in and out has messed everything up. If I hear or a fix I'll be sure to reply here to let you know!

  • Made a drop down menu. How can I get the drop down to fade in and out? !

    Hi guys!
    I've created a drop down menu (with the help of you legends on here! )...Now I just need it to animate so when the user hovers over the main menu item, the drop down fades in.
    Here's the HTML I have...
        <ul id="nav">
            <li><a href="#">Nav 1</a></li>
            <li><a href="#">Nav 2</a></li>
            <li><a href="#">Nav 3</a>
                <ul>
                    <li><a href="#">&raquo; Sub Menu 1</a></li>
                    <li><a href="#">&raquo; Sub Menu 2</a></li>
                    <li><a href="#">&raquo; Sub Menu 3</a></li>
                    <li><a href="#">&raquo; Sub Menu 4</a></li>
                </ul>
            </li>
            <li><a href="#">Nav 5</a></li>
            <li><a href="#">Nav 6</a></li>
        </ul>
    ...and here's my CSS...
    ul#nav {width:920px; height:35px; list-style:none; padding:0; margin:0; background:url(navBg.jpg) repeat-x; z-index:999;}
    ul#nav li a:hover, #nav li a:active {background:url(navOn.jpg) repeat-x; text-decoration:none;}
    ul#nav li a {color:#E0E2E7; display:inline-block; float:left; margin:0; padding:10px 19px; width:auto; text-decoration:none;}
    * html #nav li {display:inline; float:left; }  /* for IE 6 */
    * + html #nav li {display:inline; float:left; }  /* for IE 7 */
    #nav ul {width:208px; left:-9999em; list-style:none; margin:35px 0; padding:0; position:absolute; z-index:999;}
    #nav li:hover ul {left:auto;}
    #nav li {float:left;}
    #nav li li a {width:190px; background-color:#efefef; color:#2e2e2e; padding:8px; margin:0; }
    #nav li li a:hover {background-color:#000; background-image:none; color:#FFF;}
    #nav li:hover {background:url(assets/images/frame/navOn.jpg);}
    From what I can make out, I assume I need either Javascript or JQuery...
    Does anyone know how I can get the drop down to fade in and out?
    Thank you very much and I hope to hear from you.
    SM

    Yes, you'll need a client-side script to do fade-in/fade-out fx.  Look at jQuery Superfish.
    http://users.tpg.com.au/j_birch/plugins/superfish/#examples
    Nancy O.

  • I have used I tunes to download music with a paid I tunes card. I can no longer open the music store to download my music.  When I do open the music store it fades in and out, preventing me from downloading music.

    I can nolonge download music from I tunes, because the music store page fades in and out and will not remain permanent to allow me to download music with a pre-paid I tunes card.
    Also, why is it you can only download music to an I-pod from one primary computer.  Is there a method that will allow me to download music from a variety of computers.

    it only happens for previous purchases - if you have a computer you can try to download your purchase history there and then just sync them to your device - http://support.apple.com/kb/ht2519 - http://support.apple.com/kb/ht1386.

  • I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

    I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

    rickeyt
    Thanks for the reply. Great news about the volume adjusts.
    Now about those fades for the volume. How are you doing that?
    1. Right click the Timeline video audio and select Fade and then
    see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
    2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
    Please let us know if any of the above works for you with regard to the audio fades.
    Thank you.
    ATR

  • When adjusting the audio volume in a selected region, why does it give me a curved line instead of straight and why cant I change it like i can with a fade in our out?

    When adjusting the audio volume in a selected region, why does it give me a curved line as a transition instead of straight, and why cant I change the fade shape like i can with a fade in our out? When I slide thet volume all the way down it makes a very abrupt down curve. It's audibly noticdible.
    Thank you.

    Use the range selection tool and select the portion of the clip you want to change the volume on. Drag the volume line down and FCP will create keyframes which you can adjust as you want to get a fade shape.

  • Very Urgent (How can i add fade in and fade out Action)

    Hi, How can i add fade in and fade out action on the JButton when the mouse is over the button.its mean that when the mouse is over the button then the button's Label is fade in and out.
    plz give code example
    thanks

    If you want to fade in and out anything, you should look at the Composite interface. A Composite is part of a Graphics2D object. You should be able to gradually change this on the button, but maybe within a different thread?

  • Line drawn with Pencil Tool appears to fade in and out

    My Nme is Allen Togwell.Case No: 0183721415. Your chat line guy said I needed a graphic card to solve my problem for my CS6. He gave me a link but disconnected before I could use it. Can you help me with what type of graphic card I need. I am 75 yrs of age and not very com literate.
    Thanks

    Hi Allen,
    I looked up that case number and watched a recording of you working with the agent and am not convinced that what you are seeing was necessarily because of the graphics card.
    This is my interpretation and thoughts around what you were seeing. I noticed that you were working on an image that took up a fair amount of the screen when viewed at 16.7% zoom. This means it was a pretty large image. Next, I noticed you were using the pencil tool with a tip that was 4 pixels.
    I think the combination of these two things was the reason the pencil tool was appearing choppy or to fade in and out when drawing. This occurs because you are using such a small size and are zoomed out so much that the lines are barely visible. When you zoom out the program resamples the appearance. This resampling can cause detail to be lost and the appearance to vary depending on what zoom level is used, 16.7% is particularly bad with fine details.
    I think there would be two solutions, use a different zoom level to get a better view or use a pencil with a larger size.
    I recorded this video for you as an example
    http://screencast.com/t/e9dhiHKoKbv
    I suspect the list that the agent was suggesting for video cards was the one at the bottom of this document
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
    Hope that helps,
    -Dave

  • IPhone 5 voice call quality fade in and out. Noise Cancellation interference?

    I've been having this huge problem with the iPhone5. The evidence i've collected seems to indicate this is a problem with all iPhone5's.
    On calls in certain places both indoors and outdoors, the callers voices over the iPhone5 fade in and out. Their voices occasionally completely fade completely away, and only come back momentarily. The low volume for 50% of the time forces me to raise the volume, but raising the volume does not help because when the voice does come back, the volume is too loud for my ears.
    I went back to the Apple store and they are not able to help me. They suggested a clean restore, which I did. They offered to replace the phone, which I did, but it is the same problem.
    - iPhone 5 vs. iPhone 4S, the fading does not occur. I make the call to the same voice mail system I have, and the sounds from the other side are consistently the same volume for the 4S, but fades in and out for the 5.
    - I connected up a 8mm jack between my iPhone 5 and my mac in an attempt to record this problem. In that instance, the sounds from the voice mail DO NOT fade in and out. I did find out that the dynamic range on the iPhone 5 is MUCH greater than that of the iPhone 4S, for some strange reason.
    - When I hold the phone up to my ear, the fading in and out does occur, but it is less noticeable. But it's still there.
    - When I leave my work area the problem goes away. However, because the iPhone 4S on the same AT&T service does not have this problem, this leads me to believe it's NOT a lack of transmission power from the AT&T cell tower. Rather, it is a reception issue at the iPhone5 side.
    - I turned off LTE, data and then made the calls. Same issue.
    I use this phone to make 60 minute calls for conference calls frequently. I cannot use it. Please advise. I am seriously considering returning this phone. Except i've sold my old iPhone 4 already. I'm in a bad place. Please help.
    Here's another post of a fellow with the same exact problem.
    http://forums.macrumors.com/showthread.php?t=1456404
    Apple, please look into this. I believe this is a problem with the noise cancellation software.

    I've got an update on this problem with fading volume. I've isolated it to the set volume on the phone for voice calls when using headphones. When the headphone volume is set between 1 and 6 (out of 16 squares) the callers volume will consistently fade in and out. The fading which is normal to zero volume at 2-5 Hz is serious enough that normal conversation is impossible.  When the volume is raised above 6/16 then the callers voice stabilize and I can hear all their words again. Unfortunately, at 6/16 volume their voices are too loud for the headphones.
    Furthermore, when headphones are plugged in, and I initial a call after the iphone5 was idle for several minutes, the first dial tone has preceded by a very loud pop an the tone, as though there was too much pressure (charge) that was dissipated all at once.
    Other details:
    - I used 3 different earphones, iPhone 4 headphones, altec earphones, an the new iPhone 5 earbuds. Same.
    - I turned on and off lte, data, Bluetooth, wifi. Problem persists unaffected.
    - when switching to iPhones earpiece and mic, the fading is gone.
    - I have 3 out of 5 bars where I teste this, in the city outside and on hwy 5 in central California. Same symptoms in all places I've tested.
    - I have exchanged my phone at the apple store. Same issue with both iPhones an I suspect all ipjone5s.
    - the ipjone4s does NOT have this problem when the volume is set lower. I can tell that the iPhone 5 must have a new audio filter to make the sounds have larger dynamic range. I liked the 4s better, because it is easier on the ears!

  • How to make images fade in and out

    how to make images fade in and out continuously

    HI,
    The Ken Burns effects can do this nicely. Available in the iLife suite of software.
    iLife 06 minimum requirements:
    http://support.apple.com/kb/HT2675
    iLife 06 - Amazon
    Carolyn

  • How to  fade in and out

    Dear Forum;
    This is my very first time opening Garage...
    I am creating a compilation of my concerts - tunes are too long
    how do I fade in and out on the same track?
    & how do I add reverve - please help a dummy - or where in the manual? Thanks

    Move your cursor onto the audio track, to the upper-left (or upper-right) corner until the cursor icon changes to a small envelop. From there, click & drag out to create a fade. From there, you can double-click on the audio file to get a HUD with all the different types of fades available.

  • Stripe Subtitle Fade In and Out Issue

    After upgrading to iMovie HD 6, I found the Stripe Subtitle to fade in correctly, but when it begins to fade out, it will abrubtly disappear. In iMovie HD 5, the Stripe Subtitle would fade in and out smoothly. It does this when I preview a stripe subtitle, as well as in finished DVDs and Quicktime movies. I have tried adjusting the speed and pause, but that has no effect on this issue.
    You can see an example of this in one of my videos. Just watch the first minute and you'll see it happen when I introduce the first speaker:
    http://homepage.mac.com/jasonellis/iMovieTheater5.html
    Has anyone else seen this behavior? Does anyone know of a work around?

    Jason,
    You're welcome.
    Just don't ask me to explain why it works that way!
    Matt

  • Fade in and Out

    Hello Everyone,
    I would like to ask the Pro a question.
    I have a video clip which i want to cut and fade in and Fade Out the video and Audio.
    I have searched on internet but i can not seems to find the right answer.Is it that complicated to do fade in and out?
    Is there a simple way to fade in and fade out the entire video(video and audio) and NOT only video or Audio?
    How can i do that.
    Thank you very much

    On a single clip, fade and dip to black are similar. If you have two clips next to each other fade will do a mix between them, using the dip to black will fade out the first clip going to black and the fade up the second clip. The yellow line shows keyframes, this is a way of changing effect parameters against time. This is an Adobe help file about them Adobe Premiere Pro Help | Adding, navigating, and setting keyframes If you search the net there are many tutorials. You can keyframe audio and video. Have you tried adding the default fade transition to the audio? I have no problems with it. The cpu can run flat out, if needs be Premiere will slow down the export to match the quality of your hardware.

  • Does anyone have an issue with the screen fading in and out on the droid ultra?

    When I enter my pass code for voice mail it fades in and out and makes it difficult to enter the passcode.

        jdufresne72, let's bring light to this situation. Try adjusting the display light settings on your phone. Tap Settings>Display>Sleep>tap desired time for screen back light. Keep us posted and let us know if this resolves your issue.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for